1 files changed, 135 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h
new file mode 100644
index 0000000..345c51d
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h
@@ -0,0 +1,135 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments
+ */
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "RigidBoard"
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     19  // Z-MAX pin J14 End Stops
+#endif
+
+//
+// MOSFET changes
+//
+#define RAMPS_D9_PIN                           8  // FAN (by default)
+#define RAMPS_D10_PIN                          9  // EXTRUDER 1
+#define MOSFET_D_PIN                          12  // EXTRUDER 2 or FAN
+
+#include "pins_RAMPS.h"
+
+//
+// Steppers
+//
+// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3
+#undef E0_STEP_PIN
+#undef E0_DIR_PIN
+#undef E0_ENABLE_PIN
+#define E0_STEP_PIN                           36
+#define E0_DIR_PIN                            34
+#define E0_ENABLE_PIN                         30
+
+#undef E1_STEP_PIN
+#undef E1_DIR_PIN
+#undef E1_ENABLE_PIN
+#define E1_STEP_PIN                           26
+#define E1_DIR_PIN                            28
+#define E1_ENABLE_PIN                         24
+
+#define STEPPER_RESET_PIN                     41  // Stepper drivers have a reset on RigidBot
+
+//
+// Temperature Sensors
+//
+#undef TEMP_0_PIN
+#undef TEMP_1_PIN
+#undef TEMP_BED_PIN
+#define TEMP_0_PIN                            14  // Analog Input
+#define TEMP_1_PIN                            13  // Analog Input
+#define TEMP_BED_PIN                          15  // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#undef MAX6675_SS_PIN
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN                      53  // Don't use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #define MAX6675_SS_PIN                      49  // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+//
+// Heaters / Fans
+//
+#undef HEATER_BED_PIN
+#define HEATER_BED_PIN                        10
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              8  // Same as RAMPS_13_EEF
+#endif
+
+//
+// Misc. Functions
+//
+#undef PS_ON_PIN
+
+//
+// LCD / Controller
+//
+// LCD Panel options for the RigidBoard
+#if ENABLED(RIGIDBOT_PANEL)
+
+  #undef BEEPER_PIN
+  #define BEEPER_PIN                          -1
+
+  // Direction buttons
+  #define BTN_UP                              37
+  #define BTN_DWN                             35
+  #define BTN_LFT                             33
+  #define BTN_RT                              32
+
+  // 'R' button
+  #undef BTN_ENC
+  #define BTN_ENC                             31
+
+  // Disable encoder
+  #undef BTN_EN1
+  #undef BTN_EN2
+
+  #undef SD_DETECT_PIN
+  #define SD_DETECT_PIN                       22
+
+#elif IS_RRD_SC
+
+  #undef SD_DETECT_PIN
+  #define SD_DETECT_PIN                       22
+
+  #undef KILL_PIN
+  #define KILL_PIN                            32
+
+#endif