diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_RUMBA.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_RUMBA.h | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h new file mode 100644 index 0000000..4af49d9 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -0,0 +1,234 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * RUMBA pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Rumba" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#endif + +// +// Servos +// +#define SERVO0_PIN 5 + +// +// Limit Switches +// +#define X_MIN_PIN 37 +#define X_MAX_PIN 36 +#define Y_MIN_PIN 35 +#define Y_MAX_PIN 34 +#define Z_MIN_PIN 33 +#define Z_MAX_PIN 32 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#ifndef E0_STEP_PIN + #define E0_STEP_PIN 23 + #define E0_DIR_PIN 22 + #define E0_ENABLE_PIN 24 +#endif + +#ifndef E1_STEP_PIN + #define E1_STEP_PIN 26 + #define E1_DIR_PIN 25 + #define E1_ENABLE_PIN 27 +#endif + +#if E1_STEP_PIN != 29 + #define E2_STEP_PIN 29 + #define E2_DIR_PIN 28 + #define E2_ENABLE_PIN 39 +#endif + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used) + #else + #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) + #endif +#endif + +#ifndef TEMP_1_PIN + #if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used) + #else + #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) + #endif +#endif + +#if TEMP_SENSOR_2 == -1 + #define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple) +#else + #define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used) +#endif + +// Optional for extruder 4 or chamber: +//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) + +#ifndef TEMP_CHAMBER_PIN + //#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) +#endif + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple) +#else + #define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used) +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 8 +#define HEATER_BED_PIN 9 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif +#ifndef FAN1_PIN + #define FAN1_PIN 8 +#endif + +// +// Misc. Functions +// +#define LED_PIN 13 +#define PS_ON_PIN 45 +#define KILL_PIN 46 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 45 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#ifndef SPINDLE_LASER_PWM_PIN + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use? +#endif +#ifndef SPINDLE_LASER_ENA_PIN + #define SPINDLE_LASER_ENA_PIN 14 // Pullup! +#endif +#ifndef SPINDLE_DIR_PIN + #define SPINDLE_DIR_PIN 15 +#endif + +// +// LCD / Controller +// +#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 38 // Set as output on init + #define LCD_PINS_RS 41 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_CS 19 + #define DOGLCD_MOSI 42 + #define DOGLCD_SCK 18 + #define DOGLCD_A0 LCD_PINS_DC +#elif ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS 42 + #define DOGLCD_A0 19 + #define DOGLCD_MOSI 51 + #define DOGLCD_SCK 52 + + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 41 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 38 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 40 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN 25 + #endif + +#else + #define LCD_PINS_RS 19 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 18 + #define LCD_PINS_D5 38 + #define LCD_PINS_D6 41 +#endif + +#define LCD_PINS_D7 40 + +// +// Beeper, SD Card, Encoder +// +#define BEEPER_PIN 44 + +#if ENABLED(SDSUPPORT) + #define SDSS 53 + #define SD_DETECT_PIN 49 +#endif + +#if IS_NEWPANEL + #define BTN_EN1 11 + #define BTN_EN2 12 + #define BTN_ENC 43 +#endif |