diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_TRIGORILLA_14.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_TRIGORILLA_14.h | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h new file mode 100644 index 0000000..54d91ce --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -0,0 +1,157 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.4 for Anycubic + */ + +#define BOARD_INFO_NAME "Anycubic RAMPS 1.4" + +// Board labeled pins: + +#define TG_HEATER_BED_PIN 8 +#define TG_HEATER_0_PIN 10 +#define TG_HEATER_1_PIN 45 // Anycubic Kossel: Unused + +#define TG_FAN0_PIN 9 // Anycubic Kossel: Usually the part cooling fan +#define TG_FAN1_PIN 7 // Anycubic Kossel: Unused +#define TG_FAN2_PIN 44 // Anycubic Kossel: Hotend fan + +// +// Servos +// +#if MB(TRIGORILLA_14_11) + #define SERVO0_PIN 5 + #define SERVO1_PIN 4 + #define SERVO2_PIN 11 + #define SERVO3_PIN 6 +#endif + +// Remap MOSFET pins to common usages: + +#define RAMPS_D10_PIN TG_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h + +#if HAS_MULTI_HOTEND // EEF and EEB + #define RAMPS_D9_PIN TG_HEATER_1_PIN + #if !TEMP_SENSOR_BED + // EEF + #define RAMPS_D8_PIN TG_FAN0_PIN + #else + // EEB + #define RAMPS_D8_PIN TG_HEATER_BED_PIN + #define FAN_PIN TG_FAN0_PIN // Override pin 4 in pins_RAMPS.h + #endif +#elif TEMP_SENSOR_BED + // EFB (Anycubic Kossel default) + #define RAMPS_D9_PIN TG_FAN0_PIN + #if ENABLED(ANYCUBIC_LCD_CHIRON) + #define RAMPS_D8_PIN TG_HEATER_1_PIN // Heated bed is connected to HEATER1 output + #else + #define RAMPS_D8_PIN TG_HEATER_BED_PIN + #endif +#else + // EFF + #define RAMPS_D9_PIN TG_FAN1_PIN + #define RAMPS_D8_PIN TG_FAN0_PIN +#endif + +#if HAS_MULTI_HOTEND || TEMP_SENSOR_BED // EEF, EEB, EFB + #define FAN1_PIN TG_FAN1_PIN +#endif +#define FAN2_PIN TG_FAN2_PIN + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN TG_FAN2_PIN // Used in Anycubic Kossel example config +#endif + +#if ENABLED(ANYCUBIC_LCD_I3MEGA) + #define CONTROLLER_FAN_PIN TG_FAN1_PIN +#endif + +// +// AnyCubic standard pin mappings +// +// On most printers, endstops are NOT all wired to the appropriate pins on the Trigorilla board. +// For instance, on a Chiron, Y axis goes to an aux connector. +// There are also other things that have been wired in creative ways. +// To enable PIN definitions for a specific printer model, #define the appropriate symbol after +// MOTHERBOARD in Configuration.h + +// +// Limit Switches +// +//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS + +#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS) + #define X_MAX_PIN 43 + #define Y_STOP_PIN 19 +#elif EITHER(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA) + #define Y_STOP_PIN 42 + #define Z2_MIN_PIN 43 + #ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 2 + #endif + #ifndef FIL_RUNOUT_PIN + #if ENABLED(ANYCUBIC_LCD_CHIRON) + #define FIL_RUNOUT_PIN 33 + #else + #define FIL_RUNOUT_PIN 19 + #endif + #endif + #define BEEPER_PIN 31 + #define SD_DETECT_PIN 49 +#endif + +#include "pins_RAMPS.h" + +// +// AnyCubic made the following changes to 1.1.0-RC8 +// If these are appropriate for your LCD let us know. +// +#if 0 && HAS_WIRED_LCD + + // LCD Display output pins + #if BOTH(IS_NEWPANEL, PANEL_ONE) + #undef LCD_PINS_D6 + #define LCD_PINS_D6 57 + #endif + + // LCD Display input pins + #if IS_NEWPANEL + #if ANY(VIKI2, miniVIKI) + #undef DOGLCD_A0 + #define DOGLCD_A0 23 + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #undef BEEPER_PIN + #define BEEPER_PIN 33 + #undef LCD_BACKLIGHT_PIN + #define LCD_BACKLIGHT_PIN 67 + #endif + #elif ENABLED(MINIPANEL) + #undef BEEPER_PIN + #define BEEPER_PIN 33 + #undef DOGLCD_A0 + #define DOGLCD_A0 42 + #endif + +#endif // HAS_WIRED_LCD |