diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_ZRIB_V20.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_ZRIB_V20.h | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V20.h b/Marlin/src/pins/ramps/pins_ZRIB_V20.h new file mode 100644 index 0000000..6c4b28d --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ZRIB_V20.h @@ -0,0 +1,87 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ZRIB V2.0 & V3.0 pin assignments + * V2 and V3 Boards only differ in USB controller, nothing affecting the pins. + */ + +#include "pins_MKS_GEN_13.h" + +#define ZRIB_V20_D6_PIN 6 // Fan +#define ZRIB_V20_D9_PIN 9 // Fan2 +#define ZRIB_V20_A10_PIN 10 +#define ZRIB_V20_D16_PIN 16 +#define ZRIB_V20_D17_PIN 17 +#define ZRIB_V20_D23_PIN 23 +#define ZRIB_V20_D25_PIN 25 +#define ZRIB_V20_D27_PIN 27 +#define ZRIB_V20_D29_PIN 29 +#define ZRIB_V20_D37_PIN 37 + +// +// Auto fans +// +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 11 // Analog Input +#endif + +#if ENABLED(ZONESTAR_LCD) + #undef LCD_PINS_RS + #undef LCD_PINS_ENABLE + #undef LCD_PINS_D4 + #undef LCD_PINS_D5 + #undef LCD_PINS_D6 + #undef LCD_PINS_D7 + #undef ADC_KEYPAD_PIN + #undef BEEPER_PIN + + #undef SHIFT_OUT_PIN + #undef SHIFT_CLK_PIN + #undef SHIFT_LD_PIN + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + + #define LCD_PINS_RS ZRIB_V20_D16_PIN + #define LCD_PINS_ENABLE ZRIB_V20_D17_PIN + #define LCD_PINS_D4 ZRIB_V20_D23_PIN + #define LCD_PINS_D5 ZRIB_V20_D25_PIN + #define LCD_PINS_D6 ZRIB_V20_D27_PIN + #define LCD_PINS_D7 ZRIB_V20_D29_PIN + #define ADC_KEYPAD_PIN ZRIB_V20_A10_PIN + #define BEEPER_PIN ZRIB_V20_D37_PIN +#endif |