diff options
Diffstat (limited to 'Marlin/src/pins/sam/pins_DUE3DOM_MINI.h')
| -rw-r--r-- | Marlin/src/pins/sam/pins_DUE3DOM_MINI.h | 179 |
1 files changed, 179 insertions, 0 deletions
diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h new file mode 100644 index 0000000..5a20542 --- /dev/null +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -0,0 +1,179 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * DUE3DOM MINI pin assignments + */ + +#if NOT_TARGET(__SAM3X8E__) + #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "DUE3DOM MINI" + +// +// Servos +// +#define SERVO0_PIN 5 +#define SERVO1_PIN 6 +#define SERVO2_PIN 8 // 4-pin header FAN0 +#define SERVO3_PIN -1 + +// +// Limit Switches +// +#define X_MIN_PIN 38 +#define X_MAX_PIN -1 +#define Y_MIN_PIN 34 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN -1 + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 22 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 26 + +#define Z_STEP_PIN 64 +#define Z_DIR_PIN 63 +#define Z_ENABLE_PIN 15 + +#define E0_STEP_PIN 61 +#define E0_DIR_PIN 60 +#define E0_ENABLE_PIN 62 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) +#define TEMP_1_PIN 2 // Analog Input (unused) +#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950) +#define TEMP_BED_PIN 1 // Analog Input (BED thermistor) + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 53 +#else + #define MAX6675_SS_PIN 53 +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 13 // HOTEND0 MOSFET +#define HEATER_BED_PIN 7 // BED MOSFET + +#ifndef FAN_PIN + #define FAN_PIN 11 // FAN1 header on board - PRINT FAN +#endif +#define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN +#define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN +//#define FAN3_PIN 8 // FAN0 4-pin header on board + +// +// Misc. Functions +// +#define SDSS 4 +#define PS_ON_PIN 40 + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 + #define LCD_PINS_D5 45 + #define LCD_PINS_D6 46 + #define LCD_PINS_D7 47 + + #if IS_RRD_SC + + #define BEEPER_PIN 41 + + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + + #define SDSS 4 + #define SD_DETECT_PIN 14 + + #elif ENABLED(RADDS_DISPLAY) + + #define BEEPER_PIN 41 + + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + + #define BTN_BACK 71 + + #undef SDSS + #define SDSS 4 + #define SD_DETECT_PIN 14 + + #elif HAS_U8GLIB_I2C_OLED + + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + #define BEEPER_PIN 41 + #define LCD_SDSS 4 + #define SD_DETECT_PIN 14 + + #elif ENABLED(SPARK_FULL_GRAPHICS) + + #define LCD_PINS_D4 29 + #define LCD_PINS_ENABLE 27 + #define LCD_PINS_RS 25 + + #define BTN_EN1 35 + #define BTN_EN2 33 + #define BTN_ENC 37 + + #define BEEPER_PIN -1 + + #elif ENABLED(MINIPANEL) + #define BTN_EN1 52 + #define BTN_EN2 50 + #define BTN_ENC 48 + #define LCD_SDSS 4 + #define SD_DETECT_PIN 14 + #define BEEPER_PIN 41 + #define DOGLCD_A0 46 + #define DOGLCD_CS 45 + + #endif // SPARK_FULL_GRAPHICS + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD |