diff options
Diffstat (limited to 'Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h')
| -rw-r--r-- | Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h new file mode 100644 index 0000000..29905c1 --- /dev/null +++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h @@ -0,0 +1,99 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Gen3 Monolithic Electronics pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + */ + +#if NOT_TARGET(__AVR_ATmega644P__) + #error "Oops! Select 'Sanguino' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Gen3 Monolithic" +#define DEBUG_PIN 0 + +// +// Limit Switches +// +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 + +// +// Steppers +// +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 // actually uses Y_enable_pin + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 // shared with X_enable_pin + +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 + +#define E0_STEP_PIN 12 +#define E0_DIR_PIN 17 +#define E0_ENABLE_PIN 3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input + +// +// Heaters +// +#define HEATER_0_PIN 16 + +// +// Misc. Functions +// +#define PS_ON_PIN 14 // Alex, does this work on the card? + +// Alex extras from Gen3+ |