diff options
Diffstat (limited to 'Marlin/src/pins/sanguino/pins_SETHI.h')
| -rw-r--r-- | Marlin/src/pins/sanguino/pins_SETHI.h | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h new file mode 100644 index 0000000..dc2133e --- /dev/null +++ b/Marlin/src/pins/sanguino/pins_SETHI.h @@ -0,0 +1,124 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Sethi 3D_1 pin assignments - www.sethi3d.com.br + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * this assumes that this board uses the Sanguino pin map + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + */ + +#if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) + #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" +#endif + +#define BOARD_INFO_NAME "Sethi 3D_1" + +#ifndef GEN7_VERSION + #define GEN7_VERSION 12 // v1.x +#endif + +// +// Limit Switches +// +#define X_STOP_PIN 2 +#define Y_STOP_PIN 0 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 + +// +// Steppers +// +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 + +#ifndef FAN_PIN + #if GEN7_VERSION >= 13 + // Gen7 v1.3 removed the fan pin + #define FAN_PIN -1 + #else + #define FAN_PIN 31 + #endif +#endif + +// +// Misc. Functions +// +#define PS_ON_PIN 15 + +// All these generations of Gen7 supply thermistor power +// via PS_ON, so ignore bad thermistor readings +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// our pin for debugging. +#define DEBUG_PIN 0 + +// our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 |