diff options
Diffstat (limited to 'Marlin/src/pins/stm32f0')
| -rw-r--r-- | Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h | 31 | ||||
| -rw-r--r-- | Marlin/src/pins/stm32f0/pins_MALYAN_M300.h | 91 |
2 files changed, 122 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h b/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h new file mode 100644 index 0000000..abdd088 --- /dev/null +++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h @@ -0,0 +1,31 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +#pragma once + +#if NOT_TARGET(STM32F0xx) + #error "Oops! Select an STM32F0 board in your IDE." +#endif + +#define BOARD_INFO_NAME "Malyan M200 V2" + +#include "../stm32f1/pins_MALYAN_M200.h" diff --git a/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h new file mode 100644 index 0000000..2717439 --- /dev/null +++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h @@ -0,0 +1,91 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +#pragma once + +#if NOT_TARGET(__STM32F1__, STM32F1xx, STM32F0xx) + #error "Oops! Select a 'Malyan M300' board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Malyan M300" + +// +// EEPROM Emulation +// +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION + #ifndef MARLIN_EEPROM_SIZE + #define MARLIN_EEPROM_SIZE 0x800U // 2KB + #endif +#endif + +// +// SD CARD SPI +// +#define SDSS SD_SS_PIN + +// +// Timers +// +#define STEP_TIMER 6 +#define TEMP_TIMER 7 + +// +// Limit Switches +// +#define X_MAX_PIN PC13 +#define Y_MAX_PIN PC14 +#define Z_MAX_PIN PC15 +#define Z_MIN_PIN PB7 + +// +// Steppers +// +#define X_STEP_PIN PB14 +#define X_DIR_PIN PB13 +#define X_ENABLE_PIN PB10 + +#define Y_STEP_PIN PB12 +#define Y_DIR_PIN PB11 +#define Y_ENABLE_PIN PB10 + +#define Z_STEP_PIN PB2 +#define Z_DIR_PIN PB1 +#define Z_ENABLE_PIN PB10 + +#define E0_STEP_PIN PA7 +#define E0_DIR_PIN PA6 +#define E0_ENABLE_PIN PB0 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor) +#define TEMP_BED_PIN PA4 // Analog Input (BED thermistor) + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 // HOTEND0 MOSFET +#define HEATER_BED_PIN PA5 // BED MOSFET + +#define AUTO_FAN_PIN PA8 |