diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_BEAST.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_BEAST.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_BEAST.h b/Marlin/src/pins/stm32f1/pins_BEAST.h new file mode 100644 index 0000000..bf2cf64 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BEAST.h @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 21017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Beast STM32" +#define DEFAULT_MACHINE_NAME "STM32F103RET6" + +// Enable I2C_EEPROM for testing +#define I2C_EEPROM + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Steppers +// +#define X_STEP_PIN PE0 +#define X_DIR_PIN PE1 +#define X_ENABLE_PIN PC0 +#define X_MIN_PIN PD5 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 +#define Y_ENABLE_PIN PC1 +#define Y_MIN_PIN PD6 +#define Y_MAX_PIN + +#define Z_STEP_PIN PE4 +#define Z_DIR_PIN PE5 +#define Z_ENABLE_PIN PC2 +#define Z_MIN_PIN PD7 +#define Z_MAX_PIN -1 + +#define Y2_STEP_PIN -1 +#define Y2_DIR_PIN -1 +#define Y2_ENABLE_PIN -1 + +#define Z2_STEP_PIN -1 +#define Z2_DIR_PIN -1 +#define Z2_ENABLE_PIN -1 + +#define E0_STEP_PIN PE6 +#define E0_DIR_PIN PE7 +#define E0_ENABLE_PIN PC3 + +/** + * TODO: Currently using same Enable pin to all steppers. + */ + +#define E1_STEP_PIN PE8 +#define E1_DIR_PIN PE9 +#define E1_ENABLE_PIN PC4 + +#define E2_STEP_PIN PE10 +#define E2_DIR_PIN PE11 +#define E2_ENABLE_PIN PC5 + +// +// Misc. Functions +// +#define SDSS PA15 +#define LED_PIN PB2 + +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PD12 // EXTRUDER 1 +#define HEATER_1_PIN PD13 +#define HEATER_2_PIN PD14 + +#define HEATER_BED_PIN PB9 // BED +#define HEATER_BED2_PIN -1 // BED2 +#define HEATER_BED3_PIN -1 // BED3 + +#ifndef FAN_PIN + #define FAN_PIN PB10 +#endif + +#define FAN_SOFT_PWM + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN PA2 // Analog Input +#define TEMP_2_PIN PA3 // Analog Input + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #error "Non-NEWPANEL LCD is not supported." + #endif + #endif + + #if IS_NEWPANEL + #if IS_RRD_SC + #error "RRD Smart Controller is not supported." + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #elif ENABLED(LCD_I2C_PANELOLU2) + #error "LCD_I2C_PANELOLU2 is not supported." + #elif ENABLED(LCD_I2C_VIKI) + #error "LCD_I2C_VIKI is not supported." + #elif ANY(VIKI2, miniVIKI) + #error "VIKI2 / miniVIKI is not supported." + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported." + #elif ENABLED(MINIPANEL) + #error "MINIPANEL is not supported." + #else + #error "Other generic NEWPANEL LCD is not supported." + #endif + #endif // IS_NEWPANEL + +#endif // HAS_WIRED_LCD |