diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h new file mode 100644 index 0000000..f2be289 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h @@ -0,0 +1,113 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * Creality v4.5.2 and v4.5.3 (STM32F103RET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define DEFAULT_MACHINE_NAME "Creality3D" + +// +// Release PB4 (Z_STEP_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +#define BOARD_NO_NATIVE_USB + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 + //#define SDCARD_EEPROM_EMULATION +#endif + +#if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PA11 + #define IIC_EEPROM_SCL PA12 + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) +#elif ENABLED(SDCARD_EEPROM_EMULATION) + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PC4 +#define Y_STOP_PIN PC5 +#define Z_STOP_PIN PA4 + +#define FIL_RUNOUT_PIN PA7 + +// +// Probe +// +#define PROBE_TARE_PIN PA5 + +// +// Steppers +// +#define X_ENABLE_PIN PC3 +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB7 + +#define Y_ENABLE_PIN PC3 +#define Y_STEP_PIN PB6 +#define Y_DIR_PIN PB5 + +#define Z_ENABLE_PIN PC3 +#define Z_STEP_PIN PB4 +#define Z_DIR_PIN PB3 + +#define E0_ENABLE_PIN PC3 +#define E0_STEP_PIN PC2 +#define E0_DIR_PIN PB9 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PB1 // TH1 +#define TEMP_BED_PIN PB0 // TB1 + +// +// Heaters / Fans +// + +#define FAN_SOFT_PWM + +// +// SD Card +// +#define SD_DETECT_PIN PC7 +#define NO_SD_HOST_DRIVE // SD is only seen by the printer + +#define SDIO_SUPPORT // Extra added by Creality +#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h + +// +// Misc. Functions +// +#define CASE_LIGHT_PIN PA6 |