diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h new file mode 100644 index 0000000..3919723 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -0,0 +1,211 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "FYSETC AIO II" +#define BOARD_WEBSITE_URL "fysetc.com" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +#define pins_v2_20190128 // new pins define + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Flash EEPROM Emulation +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PA1 +#define Y_STOP_PIN PA0 +#define Z_STOP_PIN PB14 + +// +// Filament runout +// +#ifdef pins_v2_20190128 + #define FIL_RUNOUT_PIN PB15 +#else + #define FIL_RUNOUT_PIN PB5 +#endif + +// +// Steppers +// +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB9 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PB2 +#ifdef pins_v2_20190128 + #define Y_DIR_PIN PB3 +#else + #define Y_DIR_PIN PB0 +#endif +#define Y_ENABLE_PIN PB1 + +#define Z_STEP_PIN PC0 +#define Z_DIR_PIN PC1 +#define Z_ENABLE_PIN PC2 + +#define E0_STEP_PIN PC15 +#define E0_DIR_PIN PC14 +#define E0_ENABLE_PIN PC13 + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + */ + + // Hardware serial with switch + #define X_HARDWARE_SERIAL MSerial2 + #define Y_HARDWARE_SERIAL MSerial2 + #define Z_HARDWARE_SERIAL MSerial2 + #define E0_HARDWARE_SERIAL MSerial2 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 1 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 2 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif + + // The 4xTMC2209 module doesn't have a serial multiplexer and + // needs to set *_SLAVE_ADDRESS in Configuration_adv.h for X,Y,Z,E0 + #if HAS_DRIVER(TMC2208) + #define TMC_SERIAL_MULTIPLEXER + #define SERIAL_MUL_PIN1 PB13 + #define SERIAL_MUL_PIN2 PB12 + #endif + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Stepper current PWM +// +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 1500 // origin:2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT { 500, 500, 400 } // origin: {1300,1300,1250} + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC7 +#define HEATER_BED_PIN PC6 +#ifndef FAN_PIN + #define FAN_PIN PC8 +#endif + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC5 // Analog Input +#define TEMP_0_PIN PC4 // Analog Input + +// +// Misc. Functions +// +#define SDSS PA4 + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #define BEEPER_PIN PC9 + + #if HAS_MARLINUI_U8GLIB + + #define DOGLCD_A0 PA15 + #ifdef pins_v2_20190128 + #define DOGLCD_CS PB5 + #else + #define DOGLCD_CS PB7 + #endif + + //#define LCD_CONTRAST_INIT 190 + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #endif + + // not connected to a pin + #define SD_DETECT_PIN PC3 + + #if IS_NEWPANEL + // The encoder and click button + #define BTN_EN1 PC10 + #define BTN_EN2 PC11 + #define BTN_ENC PC12 + #endif + + #ifdef pins_v2_20190128 + #define LCD_RESET_PIN PB4 + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB0 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB6 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB7 + #endif + #else + #define LCD_RESET_PIN PB6 + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB3 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB4 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB5 + #endif + #endif + +#endif |