diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h new file mode 100644 index 0000000..13c2d41 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -0,0 +1,148 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin Lite only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin Lite" +#endif +#define BOARD_WEBSITE_URL "github.com/makerbase-mks" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +// +// Limit Switches +// +#define X_STOP_PIN PC13 +#define Y_STOP_PIN PC0 +#define Z_MIN_PIN PC12 +#define Z_MAX_PIN PB9 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PB12 +#define X_ENABLE_PIN PB10 + +#define Y_STEP_PIN PB11 +#define Y_DIR_PIN PB2 +#define Y_ENABLE_PIN PB10 + +#define Z_STEP_PIN PB1 +#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PB10 + +#define E0_STEP_PIN PC4 +#define E0_DIR_PIN PA5 +#define E0_ENABLE_PIN PA4 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC9 +#define FAN_PIN PA8 +#define HEATER_BED_PIN PC8 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA1 +#define TEMP_0_PIN PA0 + +#define FIL_RUNOUT_PIN PB8 // MT_DET + +// +// LCD Pins +// +#if HAS_WIRED_LCD + #define BEEPER_PIN PD2 + #define BTN_ENC PB3 + #define LCD_PINS_RS PC3 + + #define BTN_EN1 PB5 + #define BTN_EN2 PB4 + + #define LCD_PINS_ENABLE PC2 + + #if ENABLED(MKS_MINI_12864) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PC1 + #define DOGLCD_CS PC2 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 + + #else // !MKS_MINI_12864 + + #define LCD_PINS_D4 PC1 + #if IS_ULTIPANEL + #define LCD_PINS_D5 -1 + #define LCD_PINS_D6 -1 + #define LCD_PINS_D7 -1 + #endif + + #endif // !MKS_MINI_12864 + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #endif + #endif + +#endif // HAS_WIRED_LCD + +// Motor current PWM pins +#define MOTOR_CURRENT_PWM_XY_PIN PB0 +#define MOTOR_CURRENT_PWM_Z_PIN PA7 +#define MOTOR_CURRENT_PWM_E_PIN PA6 +#define MOTOR_CURRENT_PWM_RANGE (65535/10/3.3) // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp +#define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically. + +// +// SD Card +// +#define SD_DETECT_PIN PC10 + +// +// SPI +// +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN P1B4 +#define SD_MOSI_PIN P1B5 +#define SD_SS_PIN PA15 |