diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_STM32F1R.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_STM32F1R.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h new file mode 100644 index 0000000..d666755 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -0,0 +1,140 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 21017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Misc. STM32F1R" +#define DEFAULT_MACHINE_NAME "STM32F103RET6" + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Limit Switches +// +#define X_STOP_PIN PB3 +#define Y_STOP_PIN PB4 +#define Z_STOP_PIN PB5 + +// +// Steppers +// +#define X_STEP_PIN PC0 +#define X_DIR_PIN PC1 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PC3 +#define Y_ENABLE_PIN PA8 + +#define Z_STEP_PIN PC4 +#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PA8 + +#define E0_STEP_PIN PC6 +#define E0_DIR_PIN PC7 +#define E0_ENABLE_PIN PA8 + +/** + * TODO: Currently using same Enable pin to all steppers. + */ + +#define E1_STEP_PIN PC8 +#define E1_DIR_PIN PC9 +#define E1_ENABLE_PIN PA8 + +#define E2_STEP_PIN PC10 +#define E2_DIR_PIN PC11 +#define E2_ENABLE_PIN PA8 + +// +// Misc. Functions +// +#define SDSS PA4 +#define LED_PIN PD2 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB0 // EXTRUDER 1 +#define HEATER_1_PIN PB1 + +#define HEATER_BED_PIN PA3 // BED + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN PA2 // Analog Input + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #error "Non-NEWPANEL LCD is not supported." + #endif + #endif + + #if IS_NEWPANEL + #if IS_RRD_SC + #error "RRD Smart Controller is not supported." + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #elif ENABLED(LCD_I2C_PANELOLU2) + #error "LCD_I2C_PANELOLU2 is not supported." + #elif ENABLED(LCD_I2C_VIKI) + #error "LCD_I2C_VIKI is not supported." + #elif ANY(VIKI2, miniVIKI) + #error "VIKI2 / miniVIKI is not supported." + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported." + #elif ENABLED(MINIPANEL) + #error "MINIPANEL is not supported." + #else + #error "Other generic NEWPANEL LCD is not supported." + #endif + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD |