diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h new file mode 100644 index 0000000..e09bbff --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -0,0 +1,183 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments. + * It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it + * https://github.com/MarlinFirmware/Marlin/issues/14655 + * https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Trigorilla Pro" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +// +// EEPROM +// +#define FLASH_EEPROM_EMULATION +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE (0x800U) // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#define Z_MAX_PIN PA14 +#define Z_MIN_PIN PA13 + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 +#define TEMP_BED_PIN PA0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED +#define HEATER_BED_INVERTING true + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // FAN +#define FAN_PIN PG13 // FAN +#define FAN1_PIN PG14 // FAN + +// +// Misc +// +#define BEEPER_PIN PB0 +#define LED_PIN PD3 +//#define POWER_LOSS_PIN PG2 // PG4 PW_DET +#define FIL_RUNOUT_PIN PA15 // MT_DET + +/** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported. + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen. + * + * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ +#if HAS_FSMC_TFT + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define ANYCUBIC_TFT35 +#else + #define LCD_RESET_PIN PF11 + #define LCD_BACKLIGHT_PIN PD13 +#endif + +// XPT2046 Touch Screen calibration +#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17181 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11434 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 501 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -9 + #endif +#endif + +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PB7 // SPI2_NSS + #define TOUCH_SCK_PIN PA5 // SPI2_SCK + #define TOUCH_MISO_PIN PA6 // SPI2_MISO + #define TOUCH_MOSI_PIN PA7 // SPI2_MOSI +#endif + +// SPI1(PA7) & SPI3(PB5) not available +#define SPI_DEVICE 2 + +#if ENABLED(SDIO_SUPPORT) + #define SD_SCK_PIN PB13 // SPI2 ok + #define SD_MISO_PIN PB14 // SPI2 ok + #define SD_MOSI_PIN PB15 // SPI2 ok + #define SD_SS_PIN PC11 // PB12 is X- ok + #define SD_DETECT_PIN -1 // SD_CD ok +#else + // SD as custom software SPI (SDIO pins) + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN -1 + #define ONBOARD_SD_CS_PIN PC11 + #define SDSS PD2 + #define SD_DETECT_PIN -1 +#endif |