diff options
Diffstat (limited to 'Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h')
| -rw-r--r-- | Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h | 271 |
1 files changed, 271 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h new file mode 100644 index 0000000..18e689d --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h @@ -0,0 +1,271 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(STM32F4) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#endif + +#define DEFAULT_MACHINE_NAME "3D Printer" + +#define BOARD_INFO_NAME "FYSETC Cheetah V2.0" +#define BOARD_WEBSITE_URL "fysetc.com" + +// USB Flash Drive support +//#define HAS_OTG_USB_HOST_SUPPORT + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define FLASH_EEPROM_LEVELING + + #define FLASH_SECTOR 2 + #define FLASH_UNIT_SIZE 0x4000 // 16k + #define FLASH_ADDRESS_START 0x8008000 +#endif + +// +// Z Probe +// +#if ENABLED(BLTOUCH) + #error "You need to set jumper to 5v for Bltouch, then comment out this line to proceed." + #define SERVO0_PIN PA0 +#elif !defined(Z_MIN_PROBE_PIN) + #define Z_MIN_PROBE_PIN PA0 +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PB4 +#define Y_STOP_PIN PB3 +#define Z_STOP_PIN PB1 + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PB5 + +// +// Steppers +// +#define X_STEP_PIN PC0 +#define X_DIR_PIN PC1 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PC14 +#define Y_DIR_PIN PC13 +#define Y_ENABLE_PIN PC15 + +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PB8 +#define Z_ENABLE_PIN PC2 + +#define E0_STEP_PIN PB2 +#define E0_DIR_PIN PA15 +#define E0_ENABLE_PIN PD2 + +#if HAS_TMC_UART + #define X_HARDWARE_SERIAL Serial2 + #define Y_HARDWARE_SERIAL Serial2 + #define Z_HARDWARE_SERIAL Serial2 + #define E0_HARDWARE_SERIAL Serial2 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC6 +#define HEATER_BED_PIN PC7 +#ifndef FAN_PIN + #define FAN_PIN PA1 +#endif +#define FAN1_PIN PC8 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC5 // Analog Input +#define TEMP_0_PIN PC4 // Analog Input + +// +// Misc. Functions +// +#define SDSS PA4 +#define SD_DETECT_PIN PC3 + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB0 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB7 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB6 +#endif + +/** + * _____ _____ + * 5V | 1 2 | GND 5V | 1 2 | GND + * RESET | 3 4 | PC3 (SD_DETECT) (LCD_D7) PB7 | 3 4 | PB6 (LCD_D6) + * (SD_MOSI) PA7 5 6 | PC11 (BTN_EN2) (LCD_D5) PB14 5 6 | PB13 (LCD_D4) + * (SD_SS) PA4 | 7 8 | PC10 (BTN_EN1) (LCD_RS) PB12 | 7 8 | PB15 (LCD_EN) + * (SD_SCK) PA5 | 9 10| PA6 (SD_MISO) (BTN_ENC) PC12 | 9 10| PC9 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +/** +* _____ +* (BEEPER) PC9 | 1 2 | PC12 (BTN_ENC) +* (BTN_EN1) PC10 | 3 4 | PB14 (LCD_D5/MISO) +* (BTN_EN2) PC11 5 6 | PB13 (LCD_D4/SCK) +* (LCD_RS) PB12 | 7 8 | PB15 (LCD_EN/MOSI) +* GND | 9 10| 5V +* ----- +* EXP3 +*/ + +#define EXPA1_03_PIN PB7 +#define EXPA1_04_PIN PB6 +#define EXPA1_05_PIN PB14 +#define EXPA1_06_PIN PB13 +#define EXPA1_07_PIN PB12 +#define EXPA1_08_PIN PB15 +#define EXPA1_09_PIN PC12 +#define EXPA1_10_PIN PC9 + +#define EXPA2_03_PIN -1 +#define EXPA2_04_PIN PC3 +#define EXPA2_05_PIN PA7 +#define EXPA2_06_PIN PC11 +#define EXPA2_07_PIN PA4 +#define EXPA2_08_PIN PC10 +#define EXPA2_09_PIN PA5 +#define EXPA2_10_PIN PA6 + +#if HAS_WIRED_LCD + + #define BEEPER_PIN EXPA1_10_PIN + #define BTN_ENC EXPA1_09_PIN + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS EXPA1_07_PIN + + #define BTN_EN1 EXPA2_08_PIN + #define BTN_EN2 EXPA2_06_PIN + + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN + + // CR10_STOCKDISPLAY default timing is too fast + #undef BOARD_ST7920_DELAY_1 + #undef BOARD_ST7920_DELAY_2 + #undef BOARD_ST7920_DELAY_3 + + #elif ENABLED(MKS_MINI_12864) + + #define DOGLCD_A0 EXPA1_04_PIN + #define DOGLCD_CS EXPA1_05_PIN + #define BTN_EN1 EXPA2_08_PIN + #define BTN_EN2 EXPA2_06_PIN + + #else + + #define LCD_PINS_RS EXPA1_07_PIN + + #define BTN_EN1 EXPA2_06_PIN + #define BTN_EN2 EXPA2_08_PIN + + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS EXPA1_08_PIN + #define DOGLCD_A0 EXPA1_07_PIN + //#define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN EXPA1_05_PIN + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN EXPA1_04_PIN + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN EXPA1_03_PIN + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN EXPA1_05_PIN + #endif + #endif // !FYSETC_MINI_12864 + + #if IS_ULTIPANEL + #define LCD_PINS_D5 EXPA1_05_PIN + #define LCD_PINS_D6 EXPA1_04_PIN + #define LCD_PINS_D7 EXPA1_03_PIN + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif + +#endif // HAS_WIRED_LCD + +// Alter timing for graphical display +#if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(600) + #endif +#endif + +#if ENABLED(TOUCH_UI_FTDI_EVE) + #define BEEPER_PIN EXPA1_10_PIN + #define CLCD_MOD_RESET EXPA2_08_PIN + #define CLCD_SPI_CS EXPA2_06_PIN +#endif |