diff options
Diffstat (limited to 'Marlin/src/pins/stm32f4/pins_LERDGE_K.h')
| -rw-r--r-- | Marlin/src/pins/stm32f4/pins_LERDGE_K.h | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h new file mode 100644 index 0000000..bf6df03 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(STM32F4, STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "LERDGE K supports up to 2 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "Lerdge K" +#define DEFAULT_MACHINE_NAME "LERDGE" + +#define I2C_EEPROM + +// USB Flash Drive support +#define HAS_OTG_USB_HOST_SUPPORT + +// +// Servos +// +//#define SERVO0_PIN PB11 + +// +// Limit Switches +// +#define X_STOP_PIN PG3 +#define Y_STOP_PIN PG4 +#define Z_STOP_PIN PG5 + +// +// Z Probe (when not Z_MIN_PIN) +// +//#ifndef Z_MIN_PROBE_PIN +// #define Z_MIN_PROBE_PIN PG6 +//#endif + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PE5 +#define FIL_RUNOUT2_PIN PE6 + +// +// Steppers +// +#define X_STEP_PIN PG1 +#define X_DIR_PIN PB10 +#define X_ENABLE_PIN PG0 +//#ifndef X_CS_PIN +// #define X_CS_PIN PE0 +//#endif + +#define Y_STEP_PIN PF14 +#define Y_DIR_PIN PF15 +#define Y_ENABLE_PIN PF13 +//#ifndef Y_CS_PIN +// #define Y_CS_PIN PE1 +//#endif + +#define Z_STEP_PIN PF11 +#define Z_DIR_PIN PF12 +#define Z_ENABLE_PIN PC5 +//#ifndef Z_CS_PIN +// #define Z_CS_PIN PE2 +//#endif + +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 +//#ifndef E0_CS_PIN +// #define E0_CS_PIN PE3 +//#endif + +#define E1_STEP_PIN PF1 +#define E1_DIR_PIN PF0 +#define E1_ENABLE_PIN PF2 +//#ifndef E1_CS_PIN +// #define E1_CS_PIN PE4 +//#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // Analog Input +#define TEMP_1_PIN PC2 // Analog Input +#define TEMP_BED_PIN PC0 // Analog Input + +// Lergde-K can choose thermocouple/thermistor mode in software. +// For use with thermistors, these pins must be OUT/LOW. +// This is done automatically. +#define TEMP_0_TR_ENABLE_PIN PF10 +#define TEMP_1_TR_ENABLE_PIN PF9 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN PA0 +#define HEATER_BED_PIN PA2 + +#ifndef FAN_PIN + #define FAN_PIN PF7 +#endif +#define FAN1_PIN PF6 +#define FAN2_PIN PF8 + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PF6 +#endif + +// +// LED / Lighting +// +//#define CASE_LIGHT_PIN_CI -1 +//#define CASE_LIGHT_PIN_DO -1 +//#define NEOPIXEL_PIN -1 +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB7 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB8 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB9 +#endif + +// +// SD support +// +#define SDIO_SUPPORT +#define SDIO_CLOCK 4800000 + +// +// Misc. Functions +// +#define SDSS PC11 +#define LED_PIN PA15 // Alive +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT + +#define SD_SCK_PIN PC12 +#define SD_MISO_PIN PC8 +#define SD_MOSI_PIN PD2 +#define SD_SS_PIN PC11 + +#define SD_DETECT_PIN PA8 +#define BEEPER_PIN PC7 + +// +// LCD / Controller +// + +#define TFT_RESET_PIN PD6 +#define TFT_BACKLIGHT_PIN PD3 + +#define TFT_CS_PIN PD7 +#define TFT_RS_PIN PD11 + +#define TOUCH_CS_PIN PG15 +#define TOUCH_SCK_PIN PB3 +#define TOUCH_MOSI_PIN PB5 +#define TOUCH_MISO_PIN PB4 + +#define BTN_EN1 PG10 +#define BTN_EN2 PG11 +#define BTN_ENC PG9 |