diff options
Diffstat (limited to 'Marlin/src/pins/stm32f4/pins_LERDGE_X.h')
| -rw-r--r-- | Marlin/src/pins/stm32f4/pins_LERDGE_X.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h new file mode 100644 index 0000000..606d932 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -0,0 +1,155 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(STM32F4, STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "LERDGE X only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Lerdge X" +#define DEFAULT_MACHINE_NAME "LERDGE" + +#define STEP_TIMER 4 +#define TEMP_TIMER 2 + +#define I2C_EEPROM + +// USB Flash Drive support +#define HAS_OTG_USB_HOST_SUPPORT + +// +// Servos +// +//#define SERVO0_PIN PD13 + +// +// Limit Switches +// +#define X_STOP_PIN PB12 +#define Y_STOP_PIN PB13 +#define Z_STOP_PIN PB14 + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PE1 + +// +// Z Probe (when not Z_MIN_PIN) +// +//#ifndef Z_MIN_PROBE_PIN +// #define Z_MIN_PROBE_PIN PB15 +//#endif + +// +// Steppers +// +#define X_STEP_PIN PB10 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PB11 + +#define Y_STEP_PIN PB0 +#define Y_DIR_PIN PC5 +#define Y_ENABLE_PIN PB1 + +#define Z_STEP_PIN PA7 +#define Z_DIR_PIN PA6 +#define Z_ENABLE_PIN PC4 + +#define E0_STEP_PIN PA4 +#define E0_DIR_PIN PA3 +#define E0_ENABLE_PIN PA5 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_BED_PIN PC1 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN -1 +#define HEATER_BED_PIN PA2 + +//#ifndef FAN_PIN +// #define FAN_PIN PC15 +//#endif +#define FAN1_PIN PC15 +#define FAN2_PIN PA0 + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PC15 // FAN1_PIN +#endif + +// +// LED / Lighting +// +//#define CASE_LIGHT_PIN_CI -1 +//#define CASE_LIGHT_PIN_DO -1 +//#define NEOPIXEL_PIN -1 + +// +// Misc. Functions +// +#define SDSS PC11 +#define LED_PIN PC7 // Alive +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +// Lerdge supports auto-power off and power loss sense through a single pin. +#define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT + +#define SD_SCK_PIN PC12 +#define SD_MISO_PIN PC8 +#define SD_MOSI_PIN PD2 +#define SD_SS_PIN PC11 + +// +// SD support +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN PA8 +#define SDIO_CLOCK 4800000 + +// +// LCD / Controller +// + +// The LCD is initialized in FSMC mode +#define BEEPER_PIN PD12 + +#define BTN_EN1 PE3 +#define BTN_EN2 PE4 +#define BTN_ENC PE2 + +#define TFT_RESET_PIN PD6 +#define TFT_BACKLIGHT_PIN PD3 + +#define TFT_CS_PIN PD7 +#define TFT_RS_PIN PD11 + +#define TOUCH_CS_PIN PB6 +#define TOUCH_SCK_PIN PB3 +#define TOUCH_MOSI_PIN PB5 +#define TOUCH_MISO_PIN PB4 |