diff options
Diffstat (limited to 'Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h')
| -rw-r--r-- | Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h new file mode 100644 index 0000000..2567951 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h @@ -0,0 +1,359 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +// Source: https://github.com/stm32duino/Arduino_Core_STM32/blob/master/variants/ST3DP001_EVAL/variant.cpp + +/** + * HOW TO COMPILE + * + * PlatformIO - Use the STM32F401VE_STEVAL environment (or the "Auto Build Marlin" extension). + * + * Arduino - Tested with 1.8.10 + * Install library per https://github.com/stm32duino/Arduino_Core_STM32 + * Make the following selections under the TOOL menu in the Arduino IDE + * Board: "3D printer boards" + * Board part number: "STEVAL-3DP001V1" + * U(S)ART support: "Enabled (generic "Serial")" + * USB support (if available): "CDC (no generic "Serial")" + * Optimize: "Smallest (-Os default)" + * C Runtime Library: "newlib Nano (default)" + */ + +#pragma once + +#if NOT_TARGET(STM32F4) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#endif + +#ifndef MACHINE_NAME + #define MACHINE_NAME "STEVAL-3DP001V1" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 39 // PD8 X_STOP +#define Y_MIN_PIN 40 // PD9 Y_STOP +#define Z_MIN_PIN 41 // PD10 Z_STOP + +#define X_MAX_PIN 44 // PD0 W_STOP +#define Y_MAX_PIN 43 // PA8 V_STOP +#define Z_MAX_PIN 42 // PD11 U_STOP + +// +// Z Probe (when not Z_MIN_PIN) +// +//#ifndef Z_MIN_PROBE_PIN +// #define Z_MIN_PROBE_PIN 16 // PA4 +//#endif + +// +// Filament runout +// +//#define FIL_RUNOUT_PIN 53 // PA3 BED_THE + +// +// Steppers +// + +#define X_STEP_PIN 61 // PE14 X_PWM +#define X_DIR_PIN 62 // PE15 X_DIR +#define X_ENABLE_PIN 60 // PE13 X_RES +#define X_CS_PIN 16 // PA4 SPI_CS + +#define Y_STEP_PIN 64 // PB10 Y_PWM +#define Y_DIR_PIN 65 // PE9 Y_DIR +#define Y_ENABLE_PIN 63 // PE10 Y_RES +#define Y_CS_PIN 16 // PA4 SPI_CS + +#define Z_STEP_PIN 67 // PC6 Z_PWM +#define Z_DIR_PIN 68 // PC0 Z_DIR +#define Z_ENABLE_PIN 66 // PC15 Z_RES +#define Z_CS_PIN 16 // PA4 SPI_CS + +#define E0_STEP_PIN 71 // PD12 E1_PW +#define E0_DIR_PIN 70 // PC13 E1_DIR +#define E0_ENABLE_PIN 69 // PC14 E1_RE +#define E0_CS_PIN 16 // PA4 SPI_CS + +#define E1_STEP_PIN 73 // PE5 E2_PWM +#define E1_DIR_PIN 74 // PE6 E2_DIR +#define E1_ENABLE_PIN 72 // PE4 E2_RESE +#define E1_CS_PIN 16 // PA4 SPI_CS + +#define E2_STEP_PIN 77 // PB8 E3_PWM +#define E2_DIR_PIN 76 // PE2 E3_DIR +#define E2_ENABLE_PIN 75 // PE3 E3_RESE +#define E2_CS_PIN 16 // PA4 SPI_CS + +// needed to pass a sanity check +#define X2_CS_PIN 16 // PA4 SPI_CS +#define Y2_CS_PIN 16 // PA4 SPI_CS +#define Z2_CS_PIN 16 // PA4 SPI_CS +#define Z3_CS_PIN 16 // PA4 SPI_CS +#define E3_CS_PIN 16 // PA4 SPI_CS +#define E4_CS_PIN 16 // PA4 SPI_CS +#define E5_CS_PIN 16 // PA4 SPI_CS + +#if HAS_L64XX + #define L6470_CHAIN_SCK_PIN 17 // PA5 + #define L6470_CHAIN_MISO_PIN 18 // PA6 + #define L6470_CHAIN_MOSI_PIN 19 // PA7 + #define L6470_CHAIN_SS_PIN 16 // PA4 + + //#define SD_SCK_PIN L6470_CHAIN_SCK_PIN + //#define SD_MISO_PIN L6470_CHAIN_MISO_PIN + //#define SD_MOSI_PIN L6470_CHAIN_MOSI_PIN +#else + //#define SD_SCK_PIN 13 // PB13 SPI_S + //#define SD_MISO_PIN 12 // PB14 SPI_M + //#define SD_MOSI_PIN 11 // PB15 SPI_M +#endif + +/** + * Macro to reset/enable L6474 stepper drivers + * + * IMPORTANT - To disable (bypass) L6474s, install the corresponding + * resistors (R11 - R17) and change the "V" to "0" for the + * corresponding pins here: + */ +#define ENABLE_RESET_L64XX_CHIPS(V) do{ OUT_WRITE(X_ENABLE_PIN, V); \ + OUT_WRITE(Y_ENABLE_PIN, V); \ + OUT_WRITE(Z_ENABLE_PIN, V); \ + OUT_WRITE(E0_ENABLE_PIN,V); \ + OUT_WRITE(E1_ENABLE_PIN,V); \ + OUT_WRITE(E2_ENABLE_PIN,V); \ + }while(0) + +// +// Temperature Sensors +// +#define TEMP_0_PIN 3 // Analog input 3, digital pin 54 PA0 E1_THERMISTOR +#define TEMP_1_PIN 4 // Analog input 4, digital pin 55 PA1 E2_THERMISTOR +#define TEMP_2_PIN 5 // Analog input 5, digital pin 56 PA2 E3_THERMISTOR +#define TEMP_BED_PIN 0 // Analog input 0, digital pin 51 PC2 BED_THERMISTOR_1 +#define TEMP_BED_1_PIN 1 // Analog input 1, digital pin 52 PC3 BED_THERMISTOR_2 +#define TEMP_BED_2_PIN 2 // Analog input 2, digital pin 53 PA3 BED_THERMISTOR_3 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 48 // PC7 E1_HEAT_PWM +#define HEATER_1_PIN 49 // PB0 E2_HEAT_PWM +#define HEATER_2_PIN 50 // PB1 E3_HEAT_PWM +#define HEATER_BED_PIN 46 // PD14 (BED_HEAT_1 FET +#define HEATER_BED_1_PIN 45 // PD13 (BED_HEAT_2 FET +#define HEATER_BED_2_PIN 47 // PD15 (BED_HEAT_3 FET + +#define FAN_PIN 57 // PC4 E1_FAN PWM pin, Part cooling fan FET +#define FAN1_PIN 58 // PC5 E2_FAN PWM pin, Extruder fan FET +#define FAN2_PIN 59 // PE8 E3_FAN PWM pin, Controller fan FET + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 58 // FAN1_PIN +#endif + +// +// Misc functions +// +#define SDSS 16 // PA4 SPI_CS +#define LED_PIN -1 // 9 // PE1 green LED Heart beat +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // PWR_LOSS / nAC_FAULT + +// +// LCD / Controller +// +//#define SD_DETECT_PIN 66 // PA15 SD_CA +//#define BEEPER_PIN 24 // PC9 SDIO_D1 +//#define LCD_PINS_RS 65 // PE9 Y_DIR +//#define LCD_PINS_ENABLE 59 // PE8 E3_FAN +//#define LCD_PINS_D4 10 // PB12 SPI_C +//#define LCD_PINS_D5 13 // PB13 SPI_S +//#define LCD_PINS_D6 12 // PB14 SPI_M +//#define LCD_PINS_D7 11 // PB15 SPI_M +//#define BTN_EN1 57 // PC4 E1_FAN +//#define BTN_EN2 58 // PC5 E2_FAN +//#define BTN_ENC 52 // PC3 BED_THE + +// +// Extension pins +// +//#define EXT0_PIN 49 // PB0 E2_HEAT +//#define EXT1_PIN 50 // PB1 E3_HEAT +//#define EXT2_PIN // PB2 not used (tied to ground +//#define EXT3_PIN 39 // PD8 X_STOP +//#define EXT4_PIN 40 // PD9 Y_STOP +//#define EXT5_PIN 41 // PD10 Z_STOP +//#define EXT6_PIN 42 // PD11 +//#define EXT7_PIN 71 // PD12 E1_PW +//#define EXT8_PIN 64 // PB10 Y_PWM + +// WIFI +// 2 // PD3 CTS +// 3 // PD4 RTS +// 4 // PD5 TX +// 5 // PD6 RX +// 6 // PB5 WIFI_WAKEUP +// 7 // PE11 WIFI_RESET +// 8 // PE12 WIFI_BOOT + +// I2C USER +// 14 // PB7 SDA +// 15 // PB6 SCL + +// JTAG +// 20 // PA13 JTAG_TMS/SWDIO +// 21 // PA14 JTAG_TCK/SWCLK +// 22 // PB3 JTAG_TDO/SWO + +// +// Onboard SD support +// +#define SDIO_D0_PIN 23 // PC8 SDIO_D0 +#define SDIO_D1_PIN 24 // PC9 SDIO_D1 +//#define SD_CARD_DETECT_PIN 25 // PA15 SD_CARD_DETECT +#define SDIO_D2_PIN 26 // PC10 SDIO_D2 +#define SDIO_D3_PIN 27 // PC11 SDIO_D3 +#define SDIO_CK_PIN 28 // PC12 SDIO_CK +#define SDIO_CMD_PIN 29 // PD2 SDIO_CMD + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #define SDIO_SUPPORT // Use SDIO for onboard SD + + #ifndef SDIO_SUPPORT + #define SOFTWARE_SPI // Use soft SPI for onboard SD + #undef SDSS + #define SDSS SDIO_D3_PIN + #define SD_SCK_PIN SDIO_CK_PIN + #define SD_MISO_PIN SDIO_D0_PIN + #define SD_MOSI_PIN SDIO_CMD_PIN + #endif +#endif + +// OTG +// 30 // PA11 OTG_DM +// 31 // PA12 OTG_DP + +// USER_PINS +// 34 // PD7 USER3 +// 35 // PB9 USER1 +// 36 // PE0 USER2 +// 37 // PB4 USER4 + +// USERKET +// 38 // PE7 USER_BUTTON + +// 0 // PA9 TX +// 1 // PA10 RX + +// IR/PROBE +// 32 // PD1 IR_OUT +// 33 // PC1 IR_ON + +/** + * Logical pin vs. port/pin cross reference + * + * PA0 54 // E1_THERMISTOR PA9 0 // TX + * PA1 55 // E2_THERMISTOR PA10 1 // RX + * PA2 56 // E3_THERMISTOR PD3 2 // CTS + * PA3 53 // BED_THERMISTOR_3 PD4 3 // RTS + * PA4 16 // SPI_CS PD5 4 // TX + * PA5 17 // SPI_SCK PD6 5 // RX + * PA6 18 // SPI_MISO PB5 6 // WIFI_WAKEUP + * PA7 19 // SPI_MOSI PE11 7 // WIFI_RESET + * PA8 43 // V_STOP PE12 8 // WIFI_BOOT + * PA9 0 // TX PE1 9 // STATUS_LED + * PA10 1 // RX PB12 10 // SPI_CS + * PA11 30 // OTG_DM PB15 11 // SPI_MOSI + * PA12 31 // OTG_DP PB14 12 // SPI_MISO + * PA13 20 // JTAG_TMS/SWDIO PB13 13 // SPI_SCK + * PA14 21 // JTAG_TCK/SWCLK PB7 14 // SDA + * PA15 25 // SD_CARD_DETECT PB6 15 // SCL + * PB0 49 // E2_HEAT_PWM PA4 16 // SPI_CS + * PB1 50 // E3_HEAT_PWM PA5 17 // SPI_SCK + * PB3 22 // JTAG_TDO/SWO PA6 18 // SPI_MISO + * PB4 37 // USER4 PA7 19 // SPI_MOSI + * PB5 6 // WIFI_WAKEUP PA13 20 // JTAG_TMS/SWDIO + * PB6 15 // SCL PA14 21 // JTAG_TCK/SWCLK + * PB7 14 // SDA PB3 22 // JTAG_TDO/SWO + * PB8 77 // E3_PWM PC8 23 // SDIO_D0 + * PB9 35 // USER1 PC9 24 // SDIO_D1 + * PB10 64 // Y_PWM PA15 25 // SD_CARD_DETECT + * PB12 10 // SPI_CS PC10 26 // SDIO_D2 + * PB13 13 // SPI_SCK PC11 27 // SDIO_D3 + * PB14 12 // SPI_MISO PC12 28 // SDIO_CK + * PB15 11 // SPI_MOSI PD2 29 // SDIO_CMD + * PC0 68 // Z_DIR PA11 30 // OTG_DM + * PC1 33 // IR_ON PA12 31 // OTG_DP + * PC2 51 // BED_THERMISTOR_1 PD1 32 // IR_OUT + * PC3 52 // BED_THERMISTOR_2 PC1 33 // IR_ON + * PC4 57 // E1_FAN PD7 34 // USER3 + * PC5 58 // E2_FAN PB9 35 // USER1 + * PC6 67 // Z_PWM PE0 36 // USER2 + * PC7 48 // E1_HEAT_PWM PB4 37 // USER4 + * PC8 23 // SDIO_D0 PE7 38 // USER_BUTTON + * PC9 24 // SDIO_D1 PD8 39 // X_STOP + * PC10 26 // SDIO_D2 PD9 40 // Y_STOP + * PC11 27 // SDIO_D3 PD10 41 // Z_STOP + * PC12 28 // SDIO_CK PD11 42 // U_STOP + * PC13 70 // E1_DIR PA8 43 // V_STOP + * PC14 69 // E1_RESET PD0 44 // W_STOP + * PC15 66 // Z_RESET PD13 45 // BED_HEAT_2 + * PD0 44 // W_STOP PD14 46 // BED_HEAT_1 + * PD1 32 // IR_OUT PD15 47 // BED_HEAT_3 + * PD2 29 // SDIO_CMD PC7 48 // E1_HEAT_PWM + * PD3 2 // CTS PB0 49 // E2_HEAT_PWM + * PD4 3 // RTS PB1 50 // E3_HEAT_PWM + * PD5 4 // TX PC2 51 // BED_THERMISTOR_1 + * PD6 5 // RX PC3 52 // BED_THERMISTOR_2 + * PD7 34 // USER3 PA3 53 // BED_THERMISTOR_3 + * PD8 39 // X_STOP PA0 54 // E1_THERMISTOR + * PD9 40 // Y_STOP PA1 55 // E2_THERMISTOR + * PD10 41 // Z_STOP PA2 56 // E3_THERMISTOR + * PD11 42 // U_STOP PC4 57 // E1_FAN + * PD12 71 // E1_PWM PC5 58 // E2_FAN + * PD13 45 // BED_HEAT_2 PE8 59 // E3_FAN + * PD14 46 // BED_HEAT_1 PE13 60 // X_RESET + * PD15 47 // BED_HEAT_3 PE14 61 // X_PWM + * PE0 36 // USER2 PE15 62 // X_DIR + * PE1 9 // STATUS_LED PE10 63 // Y_RESET + * PE2 76 // E3_DIR PB10 64 // Y_PWM + * PE3 75 // E3_RESET PE9 65 // Y_DIR + * PE4 72 // E2_RESET PC15 66 // Z_RESET + * PE5 73 // E2_PWM PC6 67 // Z_PWM + * PE6 74 // E2_DIR PC0 68 // Z_DIR + * PE7 38 // USER_BUTTON PC14 69 // E1_RESET + * PE8 59 // E3_FAN PC13 70 // E1_DIR + * PE9 65 // Y_DIR PD12 71 // E1_PWM + * PE10 63 // Y_RESET PE4 72 // E2_RESET + * PE11 7 // WIFI_RESET PE5 73 // E2_PWM + * PE12 8 // WIFI_BOOT PE6 74 // E2_DIR + * PE13 60 // X_RESET PE3 75 // E3_RESET + * PE14 61 // X_PWM PE2 76 // E3_DIR + * PE15 62 // X_DIR PB8 77 // E3_PWM + */ |