diff options
Diffstat (limited to 'Marlin/src/pins/stm32f4/pins_VAKE403D.h')
| -rw-r--r-- | Marlin/src/pins/stm32f4/pins_VAKE403D.h | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h new file mode 100644 index 0000000..1135af8 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -0,0 +1,195 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(STM32F4, STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "STM32F4 supports up to 2 hotends / E-steppers." +#endif + +#define DEFAULT_MACHINE_NAME "STM32F446VET6" +#define BOARD_INFO_NAME "STM32F4 VAkE" + +//#define I2C_EEPROM +#define MARLIN_EEPROM_SIZE 0x1000 // 4KB + +// +// Servos +// +//#define SERVO0_PIN PE13 +//#define SERVO1_PIN PE14 + +// +// Limit Switches +// +#define X_STOP_PIN PE10 +#define Y_STOP_PIN PE9 +#define Z_STOP_PIN PE8 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PA4 +#endif + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PA3 + +// +// Steppers +// + +#define STEPPER_ENABLE_PIN PB2 + +#define X_STEP_PIN PC6 // X_STEP +#define X_DIR_PIN PC7 // X_DIR +#define X_ENABLE_PIN PB2 // +#ifndef X_CS_PIN + #define X_CS_PIN PC8 // X_CS +#endif + +#define Y_STEP_PIN PD9 // Y_STEP +#define Y_DIR_PIN PD10 // Y_DIR +#define Y_ENABLE_PIN PB2 // +#ifndef Y_CS_PIN + #define Y_CS_PIN PD11 // Y_CS +#endif + +#define Z_STEP_PIN PE15 // Z_STEP +#define Z_DIR_PIN PB10 // Z_DIR +#define Z_ENABLE_PIN PB2 +#ifndef Z_CS_PIN + #define Z_CS_PIN PD8 +#endif + +#define E0_STEP_PIN PB1 +#define E0_DIR_PIN PB13 +#define E0_ENABLE_PIN PB2 +#ifndef E0_CS_PIN + #define E0_CS_PIN PE11 +#endif + +#define E1_STEP_PIN PC4 +#define E1_DIR_PIN PC5 +#define E1_ENABLE_PIN PB2 +#ifndef E1_CS_PIN + #define E1_CS_PIN PB0 +#endif + +#define SD_SCK_PIN PE12 // PA5 // SPI1 for SD card +#define SD_MISO_PIN PE13 // PA6 +#define SD_MOSI_PIN PE14 // PA7 + +// added for SD card : optional or not ??? +//#define SD_CHIP_SELECT_PIN SDSS // The default chip select pin for the SD card is SS. +// The following three pins must not be redefined for hardware SPI. +//#define SPI_MOSI_PIN SD_MOSI_PIN // SPI Master Out Slave In pin +//#define SPI_MISO_PIN SD_MISO_PIN // SPI Master In Slave Out pin +//#define SPI_SCK_PIN SD_SCK_PIN // SPI Clock pin + +// +// Temperature Sensors (Analog inputs) +// + +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN PC1 // Analog Input +#define TEMP_2_PIN PC2 // Analog Input +#define TEMP_3_PIN PC3 // Analog Input +#define TEMP_BED_PIN PC3 // Analog Input + +// +// Heaters / Fans +// + +#define HEATER_0_PIN PD15 +#define HEATER_1_PIN PD14 +#define HEATER_BED_PIN PD12 + +#ifndef FAN_PIN + #define FAN_PIN PD13 +#endif +#define FAN1_PIN PB5 // PA0 +#define FAN2_PIN PB4 // PA1 + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PD13 +#endif + +// +// Misc. Functions +// + +//#define CASE_LIGHT_PIN_CI PF13 +//#define CASE_LIGHT_PIN_DO PF14 +//#define NEOPIXEL_PIN PF13 + +// +// Průša i3 MK2 Multi Material Multiplexer Support +// +//#define E_MUX0_PIN PG3 +//#define E_MUX1_PIN PG4 + +#define LED_PIN PB14 // Alive +#define PS_ON_PIN PE0 +#define KILL_PIN PD5 +#define POWER_LOSS_PIN PA4 // ?? Power loss / nAC_FAULT + +#if ENABLED(SDSUPPORT) + #define SD_DETECT_PIN PB7 + #define SD_SS_PIN PB_15 // USD_CS -> CS for onboard SD +#endif + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + #if ENABLED(SDSUPPORT) + #define SDSS PB6 // CS for SD card in LCD + #endif + #define BEEPER_PIN PC9 + #define LCD_PINS_RS PC12 + #define LCD_PINS_ENABLE PD7 + #define LCD_PINS_D4 PD1 + #define LCD_PINS_D5 PD2 + #define LCD_PINS_D6 PD3 + #define LCD_PINS_D7 PD4 + #define BTN_EN1 PD6 + #define BTN_EN2 PD0 + #define BTN_ENC PB12 +#endif + +// +// ST7920 Delays +// +#ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) +#endif +#ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) +#endif +#ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(715) +#endif |