diff options
Diffstat (limited to 'Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h')
| -rw-r--r-- | Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h new file mode 100644 index 0000000..e41fcaa --- /dev/null +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h @@ -0,0 +1,138 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Brainwave Pro pin assignments (AT90USB1286) + * + * Requires hardware bundle for Arduino: + * https://github.com/unrepentantgeek/brainwave-arduino + */ + +/** + * Rev B 16 JAN 2017 + * + * Added pointers to currently available Arduino IDE extensions that will + * allow this board to use the latest Marlin software + * + * + * Rev C 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - https://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools > Board' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#if NOT_TARGET(__AVR_AT90USB1286__) + #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Brainwave Pro" + +// +// Limit Switches +// +#define X_STOP_PIN 45 // F7 +#define Y_STOP_PIN 12 // C2 +#define Z_STOP_PIN 36 // E4 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 11 // C1 +#endif + +// +// Steppers +// +#define X_STEP_PIN 9 // E1 +#define X_DIR_PIN 8 // E0 +#define X_ENABLE_PIN 23 // B3 + +#define Y_STEP_PIN 7 // D7 +#define Y_DIR_PIN 6 // D6 +#define Y_ENABLE_PIN 20 // B0 + +#define Z_STEP_PIN 5 // D5 +#define Z_DIR_PIN 4 // D4 +#define Z_ENABLE_PIN 37 // E5 + +#define E0_STEP_PIN 47 // E3 +#define E0_DIR_PIN 46 // E2 +#define E0_ENABLE_PIN 25 // B5 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 2 // F2 Analog Input +#define TEMP_1_PIN 1 // F1 Analog Input +#define TEMP_BED_PIN 0 // F0 Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 27 // B7 +#define HEATER_BED_PIN 26 // B6 Bed +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 Fan, PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 +#define SD_DETECT_PIN 24 // B4 +#define LED_PIN 13 // C3 |