diff options
Diffstat (limited to 'Marlin/src/pins/teensy2/pins_PRINTRBOARD.h')
| -rw-r--r-- | Marlin/src/pins/teensy2/pins_PRINTRBOARD.h | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h new file mode 100644 index 0000000..2401c97 --- /dev/null +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h @@ -0,0 +1,169 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - https://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools > Board' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#if NOT_TARGET(__AVR_AT90USB1286__) + #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Printrboard" + +// Disable JTAG pins so they can be used for the Extrudrboard +#define DISABLE_JTAG + +// +// Limit Switches +// +#define X_STOP_PIN 47 // E3 +#define Y_STOP_PIN 20 // B0 SS +#define Z_STOP_PIN 36 // E4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_1_PIN 44 // F6 +#define HEATER_2_PIN 45 // F7 +#define HEATER_BED_PIN 14 // C4 PWM3C + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 26 // B6 SDCS +#define FILWIDTH_PIN 2 // Analog Input + +// +// LCD / Controller +// +#if IS_ULTRA_LCD && IS_NEWPANEL + + #define LCD_PINS_RS 9 // E1 JP11-11 + #define LCD_PINS_ENABLE 8 // E0 JP11-10 + #define LCD_PINS_D4 7 // D7 JP11-8 + #define LCD_PINS_D5 6 // D6 JP11-7 + #define LCD_PINS_D6 5 // D5 JP11-6 + #define LCD_PINS_D7 4 // D4 JP11-5 + + #if ANY(VIKI2, miniVIKI) + #define BEEPER_PIN 8 // E0 JP11-10 + + #define DOGLCD_A0 40 // F2 JP2-2 + #define DOGLCD_CS 41 // F3 JP2-4 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 2 // D2 TX1 JP2-5 + #define BTN_EN2 3 // D3 RX1 JP2-7 + #define BTN_ENC 45 // F7 TDI JP2-12 + + #undef SDSS + #define SDSS 43 // F5 TMS JP2-8 + + #define STAT_LED_RED_PIN 12 // C2 JP11-14 + #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 3 // D3 RX1 JP2-7 + #define BTN_EN2 2 // D2 TX1 JP2-5 + #define BTN_ENC 41 // F3 JP2-4 + #undef SDSS + #define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2 + + #else + + #define BTN_EN1 10 // C0 JP11-12 + #define BTN_EN2 11 // C1 JP11-13 + #define BTN_ENC 12 // C2 JP11-14 + + #endif + +#endif // IS_ULTRA_LCD && IS_NEWPANEL |