diff options
Diffstat (limited to 'Marlin/src/pins/teensy2/pins_SAV_MKI.h')
| -rw-r--r-- | Marlin/src/pins/teensy2/pins_SAV_MKI.h | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy2/pins_SAV_MKI.h b/Marlin/src/pins/teensy2/pins_SAV_MKI.h new file mode 100644 index 0000000..bcc456c --- /dev/null +++ b/Marlin/src/pins/teensy2/pins_SAV_MKI.h @@ -0,0 +1,185 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - https://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools > Board' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#if NOT_TARGET(__AVR_AT90USB1286__) + #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "SAV MkI" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#define DEFAULT_SOURCE_CODE_URL "tinyurl.com/onru38b" + +// +// Servos +// +#define SERVO0_PIN 39 // F1 In teensy's pin definition for pinMode (in servo.cpp) + +// +// Limit Switches +// +#define X_STOP_PIN 25 // B5 +#define Y_STOP_PIN 26 // B6 +//#define Z_STOP_PIN 27 // B7 +#define Z_STOP_PIN 36 // E4 For inductive sensor. +//#define E_STOP_PIN 36 // E4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) +#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C - Bed + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 + +// Extension header pin mapping +// ---------------------------- +// SCL (I2C)-D0 A0 (An), IO +// SDA (I2C)-D1 A1 (An), IO +// RX1-D2 A2 (An), IO +// TX1-D3 A3 (An), IO +// PWM-D24 A4 (An), IO +// 5V GND +// 12V GND +#define EXT_AUX_SCL_D0 0 // D0 PWM0B +#define EXT_AUX_SDA_D1 1 // D1 +#define EXT_AUX_RX1_D2 2 // D2 +#define EXT_AUX_TX1_D3 3 // D3 +#define EXT_AUX_PWM_D24 24 // B4 PWM2A +#define EXT_AUX_A0 0 // F0 Analog Input +#define EXT_AUX_A0_IO 38 // F0 Digital IO +#define EXT_AUX_A1 1 // F1 Analog Input +#define EXT_AUX_A1_IO 39 // F1 Digital IO +#define EXT_AUX_A2 2 // F2 Analog Input +#define EXT_AUX_A2_IO 40 // F2 Digital IO +#define EXT_AUX_A3 3 // F3 Analog Input +#define EXT_AUX_A3_IO 41 // F3 Digital IO +#define EXT_AUX_A4 4 // F4 Analog Input +#define EXT_AUX_A4_IO 42 // F4 Digital IO + +// +// LCD / Controller +// +#define BEEPER_PIN -1 +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 + +#if ENABLED(SAV_3DLCD) + // For LCD SHIFT register LCD + #define SR_DATA_PIN EXT_AUX_SDA_D1 + #define SR_CLK_PIN EXT_AUX_SCL_D0 +#endif + +#if EITHER(SAV_3DLCD, SAV_3DGLCD) + + #define BTN_EN1 EXT_AUX_A1_IO + #define BTN_EN2 EXT_AUX_A0_IO + #define BTN_ENC EXT_AUX_PWM_D24 + + #define KILL_PIN EXT_AUX_A2_IO + #define HOME_PIN EXT_AUX_A4_IO + +#else // Use the expansion header for spindle control + + // + // M3/M4/M5 - Spindle/Laser Control + // + #define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A + #define SPINDLE_LASER_ENA_PIN 39 // F1 Pin should have a pullup! + #define SPINDLE_DIR_PIN 40 // F2 + + #define CASE_LIGHT_PIN 0 // D0 PWM0B + +#endif |