diff options
Diffstat (limited to 'Marlin/src/pins/teensy2/pins_TEENSY2.h')
| -rw-r--r-- | Marlin/src/pins/teensy2/pins_TEENSY2.h | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy2/pins_TEENSY2.h b/Marlin/src/pins/teensy2/pins_TEENSY2.h new file mode 100644 index 0000000..d43e39b --- /dev/null +++ b/Marlin/src/pins/teensy2/pins_TEENSY2.h @@ -0,0 +1,188 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - https://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools > Board' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +/** + * Teensy++ 2.0 Breadboard pin assignments (AT90USB1286) + * Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! + * https://www.pjrc.com/teensy/teensyduino.html + * See https://reprap.org/wiki/Printrboard for more info + * + * CLI build: HARDWARE_MOTHERBOARD=84 make + * + * DaveX plan for Teensylu/printrboard-type pinouts for a TeensyBreadboard: + * (ref teensylu & sprinter) + * + * USB + * GND GND |-----#####-----| +5V ATX +5SB + * ATX PS_ON PWM 27 |b7 ##### b6| 26 PWM* Stepper Enable + * PWM 0 |d0 b5| 25 PWM* + * PWM 1 |d1 b4| 24 PWM + * X_MIN 2 |d2 b3| 23 MISO_PIN + * Y_MIN 3 |d3 b2| 22 MOSI_PIN + * Z_MIN 4 |d4 * * b1| 21 SCK_PIN + * 5 |d5 e e b0| 20 SDSS + * LED 6 |d6 5 4 e7| 19 + * 7 |d7 e6| 18 + * LCD RS 8 |e0 | GND + * LCD EN 9 |e1 a4 a0 R| AREF + * LCD D4 10 |c0 a5 a1 f0| 38 A0 ENC_1 + * LCD D5 11 |c1 a6 a2 f1| 39 A1 ENC_2 + * LCD D6 12 |c2 a7 a3 f2| 40 A2 ENC_CLK + * LCD D6 13 |c3 f3| 41 A3 + * Bed Heat PWM 14 |c4 V G R f4| 42 A4 + * Extruder Heat PWM 15 |c5 c n S f5| 43 A5 + * Fan PWM 16 |c6 c d T f6| 44 A6 Bed TC + * 17 |c7 * * * f7| 45 A7 Extruder TC * 4.7k * +5 + * ----------------- + * + * Interior E4: 36, INT4 + * Interior E5: 37, INT5 + * Interior PA0-7: 28-35 -- Printrboard and Teensylu use these pins for step & direction: + * T++ PA Signal Marlin + * + * Z STEP 32 a4 a0 28 X STEP + * Z DIR 33 a5 a1 29 X DIR + * E STEP 34 a6 a2 30 Y STEP + * E DIR 35 a7 a3 31 Y DIR + */ + +#if NOT_TARGET(__AVR_AT90USB1286__) + #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Teensy++2.0" + +// +// Limit Switches +// +#define X_STOP_PIN 2 // D2 +#define Y_STOP_PIN 3 // D3 +#define Z_STOP_PIN 4 // D4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 Marlin +#define X_DIR_PIN 29 // A1 Marlin +#define X_ENABLE_PIN 26 // B6 + +#define Y_STEP_PIN 30 // A2 Marlin +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 26 // B6 Shared w/x + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 26 // B6 Shared w/x + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 26 // B6 Shared w/x + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) +#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A Fan +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 +#define LED_PIN 6 // D6 +#define PS_ON_PIN 27 // B7 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 1 // D1 PWM2B MUST BE HARDWARE PWM +#endif + +// +// LCD / Controller +// +#if IS_ULTIPANEL + #define LCD_PINS_RS 8 // E0 + #define LCD_PINS_ENABLE 9 // E1 + #define LCD_PINS_D4 10 // C0 + #define LCD_PINS_D5 11 // C1 + #define LCD_PINS_D6 12 // C2 + #define LCD_PINS_D7 13 // C3 + #define BTN_EN1 38 // F0 + #define BTN_EN2 39 // F1 + #define BTN_ENC 40 // F2 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENA_PIN 5 // D5 Pin should have a pullup! +#define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 7 // D7 |