1 files changed, 112 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h
new file mode 100644
index 0000000..0edb5cb
--- /dev/null
+++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h
@@ -0,0 +1,112 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Teensy 3.1 (MK20DX256) and Teensy 3.2 (MK20DX256) Breadboard pin assignments
+ * Requires the Teensyduino software with Teensy 3.1 or Teensy 3.2 selected in Arduino IDE!
+ * https://www.pjrc.com/teensy/teensyduino.html
+ */
+
+#if NOT_TARGET(IS_TEENSY_31_32)
+  #error "Oops! Select 'Teensy 3.1' or 'Teensy 3.2' in 'Tools > Board.'"
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "Teensy3.2"
+#endif
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                             3
+#define Y_STOP_PIN                             4
+#define Z_STOP_PIN                             5
+
+//
+// Steppers
+//
+#define X_STEP_PIN                             5
+#define X_DIR_PIN                              6
+#define X_ENABLE_PIN                           2
+
+#define Y_STEP_PIN                             7
+#define Y_DIR_PIN                              8
+#define Y_ENABLE_PIN                           2
+
+#define Z_STEP_PIN                             9
+#define Z_DIR_PIN                             10
+#define Z_ENABLE_PIN                           2
+
+#define E0_STEP_PIN                           11
+#define E0_DIR_PIN                            12
+#define E0_ENABLE_PIN                          2
+
+//#define E1_STEP_PIN                         33
+//#define E1_DIR_PIN                          34
+//#define E1_ENABLE_PIN                       35
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          20
+//#define HEATER_1_PIN                        36
+#define HEATER_BED_PIN                        21
+#ifndef FAN_PIN
+  #define FAN_PIN                             22
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            14  // Analog Input - Extruder 2 => A2
+//#define TEMP_1_PIN                           0  // Analog Input
+#define TEMP_BED_PIN                          15  // Analog Input - Bed
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         6  // Analog Input
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN                               13
+//#define SOL1_PIN                            28
+//#define SDSS                                16  // 8
+
+//
+// LCD / Controller
+//
+
+/*
+#if HAS_WIRED_LCD
+  #define LCD_PINS_RS                         40
+  #define LCD_PINS_ENABLE                     41
+  #define LCD_PINS_D4                         42
+  #define LCD_PINS_D5                         43
+  #define LCD_PINS_D6                         44
+  #define LCD_PINS_D7                         45
+  #define BTN_EN1                             46
+  #define BTN_EN2                             47
+  #define BTN_ENC                             48
+#endif
+*/