diff options
Diffstat (limited to 'Marlin/src/pins/teensy4/pins_TEENSY41.h')
| -rw-r--r-- | Marlin/src/pins/teensy4/pins_TEENSY41.h | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy4/pins_TEENSY41.h b/Marlin/src/pins/teensy4/pins_TEENSY41.h new file mode 100644 index 0000000..21a1ff6 --- /dev/null +++ b/Marlin/src/pins/teensy4/pins_TEENSY41.h @@ -0,0 +1,131 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/**************************************************************************************** +* Teensy 4.1 (IMXRT1062) Breadboard pin assignments +* Requires the Teensyduino software with Teensy 4.1 selected in Arduino IDE! +* https://www.pjrc.com/teensy/teensyduino.html +****************************************************************************************/ + +#if NOT_TARGET(IS_TEENSY41) + #error "Oops! Select 'Teensy 4.1' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Teensy4.1" + +/** + * Plan for Teensy 4.0 and Teensy 4.1: + * USB + * GND |-----#####-----| VIN (3.65 TO 5.5V) + * X_STEP_PIN CS1 RX1 PWM 0 | ##### | GND + * X_DIR_PIN MISO1 TX1 PWM 1 | | 3.3V + * Y_STEP_PIN PWM 2 | | 23 A9 PWM SERVO1_PIN + * Y_DIR_PIN PWM 3 | | 22 A8 PWM SERVO0_PIN + * Z_STEP_PIN PWM 4 | | 21 A7 RX5 + * Z_DIR_PIN PWM 5 | | 20 A6 TX5 FILWIDTH_PIN + * X_ENABLE_PIN PWM 6 | | 19 A5 PWM SCL0 + * Y_ENABLE_PIN RX2 PWM 7 | | 18 A4 PWM SDA0 HEATER_1_PIN + * Z_ENABLE_PIN TX2 PWM 8 | | 17 A3 RX4 SDA1 + * E0_STEP_PIN PWM 9 | | 16 A2 TX4 SCL1 TEMP_0_PIN + * E0_DIR_PIN PWM 10 | | 15 A1 PWM RX3 TEMP_BED_PIN + * MOSI_PIN MOSI0 PWM 11 | | 14 A0 PWM TX3 TEMP_1_PIN + * MISO_PIN MISO0 PWM 12 | | 13 LED PWM SCK0 SCK_PIN + * 3.3V | | GND + * Z_STOP_PIN PWM 24 | | 41 A17 + * E0_ENABLE_PIN PWM 25 | | 40 A16 + * FAN_PIN MOSI1 26 | | 39 A15 MISO1 X_STOP_PIN + * Z-PROBE PWR SCK1 27 | * * * * * | 38 A14 Y_STOP_PIN + * SOL1_PIN RX7 PWM 28 | | 37 PWM HEATER_0_PIN + * FAN_PIN TX7 PWM 29 | | 36 PWM HEATER_BED_PIN + * X_CS_PIN 30 | | 35 TX8 E1_ENABLE_PIN + * y_CS_PIN 31 | SDCARD | 34 RX8 E1_DIR_PIN + * Z_CS_PIN 32 |_______________| 33 PWM E1_STEP_PIN + */ + +// +// Servos +// +#define SERVO0_PIN 22 +#define SERVO1_PIN 23 + +// +// Limit Switches +// +#define X_STOP_PIN 39 +#define Y_STOP_PIN 38 +#define Z_STOP_PIN 24 + +// +// Steppers +// +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 6 +//#define X_CS_PIN 30 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 7 +//#define Y_CS_PIN 31 + +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 8 +//#define Z_CS_PIN 32 + +#define E0_STEP_PIN 9 +#define E0_DIR_PIN 10 +#define E0_ENABLE_PIN 25 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 35 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 37 +#define HEATER_1_PIN 18 +#define HEATER_BED_PIN 36 +#ifndef FAN_PIN + #define FAN_PIN 29 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 +#define TEMP_1_PIN 0 +#define TEMP_BED_PIN 1 // Bed / Analog pin numbering + +// +// Misc. Functions +// +#define LED_PIN 13 +#define SOL0_PIN 28 +//#define PS_ON_PIN 1 +//#define FILWIDTH_PIN 6 // A6 + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif |