diff options
Diffstat (limited to 'Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h')
| -rw-r--r-- | Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h new file mode 100644 index 0000000..2de0d46 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h @@ -0,0 +1,236 @@ +/** + * Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Contact information + * ------------------- + * + * Circuits At Home, LTD + * Web : https://www.circuitsathome.com + * e-mail : support@circuitsathome.com + */ + +#pragma once + +#include "../../../inc/MarlinConfig.h" + +#include "macros.h" + +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) + //////////////////////////////////////////////////////////////////////////////// + /* Added by Bill Greiman to speed up mass storage initialization with USB + * flash drives and simple USB hard drives. + * Disable this by defining DELAY(x) to be delay(x). + */ + #define delay(x) if ((x) < 200) safe_delay(x) + /* Almost all USB flash drives and simple USB hard drives fail the write + * protect test and add 20 - 30 seconds to USB init. Set SKIP_WRITE_PROTECT + * to nonzero to skip the test and assume the drive is writable. + */ + #define SKIP_WRITE_PROTECT 1 + /* Since Marlin only cares about USB flash drives, we only need one LUN. */ + #define MASS_MAX_SUPPORTED_LUN 1 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// SPI Configuration +//////////////////////////////////////////////////////////////////////////////// + +#ifndef USB_SPI + #define USB_SPI SPI + //#define USB_SPI SPI1 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// DEBUGGING +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 to activate serial debugging */ +#define ENABLE_UHS_DEBUGGING 0 + +/* This can be used to select which serial port to use for debugging if + * multiple serial ports are available. + * For example Serial3. + */ +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) + #define USB_HOST_SERIAL MYSERIAL0 +#endif + +#ifndef USB_HOST_SERIAL + #define USB_HOST_SERIAL Serial +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Manual board activation +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */ +#define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually + +/* Set this to 1 if you are using a Black Widdow */ +#define USE_UHS_BLACK_WIDDOW 0 + +/* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */ +#define USE_XMEM_SPI_LOCK 0 + +//////////////////////////////////////////////////////////////////////////////// +// Wii IR camera +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 to activate code for the Wii IR camera */ +#define ENABLE_WII_IR_CAMERA 0 + +//////////////////////////////////////////////////////////////////////////////// +// MASS STORAGE +//////////////////////////////////////////////////////////////////////////////// +// ******* IMPORTANT ******* +// Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives. +// Each LUN needs ~13 bytes to be able to track the state of each unit. +#ifndef MASS_MAX_SUPPORTED_LUN + #define MASS_MAX_SUPPORTED_LUN 8 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Set to 1 to use the faster spi4teensy3 driver. +//////////////////////////////////////////////////////////////////////////////// +#ifndef USE_SPI4TEENSY3 + #define USE_SPI4TEENSY3 1 +#endif + +// Disabled on the Teensy LC, as it is incompatible for now +#ifdef __MKL26Z64__ + #undef USE_SPI4TEENSY3 + #define USE_SPI4TEENSY3 0 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// AUTOMATIC Settings +//////////////////////////////////////////////////////////////////////////////// + +// No user serviceable parts below this line. +// DO NOT change anything below here unless you are a developer! + +//#include "version_helper.h" + +#if defined(__GNUC__) && defined(__AVR__) + #ifndef GCC_VERSION + #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) + #endif + #if GCC_VERSION < 40602 // Test for GCC < 4.6.2 + #ifdef PROGMEM + #undef PROGMEM + #define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for https://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4 + #ifdef PSTR + #undef PSTR + #define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source + #endif + #endif + #endif +#endif + +#if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING + #define DEBUG_USB_HOST +#endif + +#if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA + #define WIICAMERA +#endif + +// To use some other locking (e.g. freertos), +// define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock. +// NOTE: NO argument is passed. You have to do this within your routine for +// whatever you are using to lock and unlock. +#ifndef XMEM_ACQUIRE_SPI + #if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API) + #include <xmem.h> + #else + #define XMEM_ACQUIRE_SPI() (void(0)) + #define XMEM_RELEASE_SPI() (void(0)) + #endif +#endif + +#if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP) + #include <xmem.h> +#else + #define EXT_RAM 0 +#endif + +#if defined(CORE_TEENSY) && defined(KINETISK) + #define USING_SPI4TEENSY3 USE_SPI4TEENSY3 +#else + #define USING_SPI4TEENSY3 0 +#endif +#if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3 + #include <SPI.h> // Use the Arduino SPI library for the Arduino Due, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available +#endif +#ifdef RBL_NRF51822 + #include <nrf_gpio.h> + #include <SPI_Master.h> + #define SPI SPI_Master + #define MFK_CASTUINT8T (uint8_t) // RBLs return type for sizeof needs casting to uint8_t +#endif +#if defined(__PIC32MX__) || defined(__PIC32MZ__) + #include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library +#endif + +#if defined(ESP8266) || defined(ESP32) + #define MFK_CASTUINT8T (uint8_t) // ESP return type for sizeof needs casting to uint8_t +#endif + +#ifdef STM32F4 + #include "stm32f4xx_hal.h" + extern SPI_HandleTypeDef SPI_Handle; // Needed to be declared in your main.cpp +#endif + +// Fix defines on Arduino Due +#ifdef ARDUINO_SAM_DUE + #ifdef tokSETUP + #undef tokSETUP + #endif + #ifdef tokIN + #undef tokIN + #endif + #ifdef tokOUT + #undef tokOUT + #endif + #ifdef tokINHS + #undef tokINHS + #endif + #ifdef tokOUTHS + #undef tokOUTHS + #endif +#endif + +// Set defaults +#ifndef MFK_CASTUINT8T + #define MFK_CASTUINT8T +#endif + +// Workaround issue: https://github.com/esp8266/Arduino/issues/2078 +#ifdef ESP8266 + #undef PROGMEM + #define PROGMEM +#undef PSTR + #define PSTR(s) (s) +#undef pgm_read_byte + #define pgm_read_byte(addr) (*reinterpret_cast<const uint8_t*>(addr)) + #undef pgm_read_word + #define pgm_read_word(addr) (*reinterpret_cast<const uint16_t*>(addr)) +#endif + +#ifdef ARDUINO_ESP8266_WIFIO + #error "This board is currently not supported" +#endif |