diff options
Diffstat (limited to 'buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp')
| -rw-r--r-- | buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp new file mode 100644 index 0000000..e78718c --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp @@ -0,0 +1,240 @@ +/* + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG) +// Pin number +// This array allows to wrap Arduino pin number(Dx or x) +// to STM32 PinName (PX_n) +const PinName digitalPin[] = { + // Right Side + //Int //Ext + //3V3 //3V3 + //3V3 //3V3 + //BOOT0 //BOOT1 + //GND //GND + //GND //GND + PE_1, PE_0, // D0, D1 + PB_9, PB_8, + PB_7, PB_6, + PB_5, PB_3, + PD_7, PD_6, + PD_5, PD_4, // D10, D11 + PD_3, PD_2, + PD_1, PD_0, + PC_12, PC_11, + PC_10, PA_15, + PA_12, PA_11, // D20, D21 PA_11: USB_DM, PA_12: USB_DP + PA_10, PA_9, + PA_8, PC_9, + PC_8, PC_7, + PC_6, PD_15, + PD_14, PD_13, // D30, D31 + PD_12, PD_11, + PD_10, PD_9, + PD_8, PB_15, + // Left Side + //Ext //Int + //5V //5V + //5V //5V + //3V3 //3V3 + //3V3 //3V3 + //GND //GND + PE_2, PE_3, + PE_4, PE_5, // D40, D41 PE_4: BUT K0, PE_5: BUT K1 + PE_6, PC_13, + PC_0, PC_1, + PC_2, PC_3, + //VREF- //VREF+ + PA_0, PA_1, // PA_0(WK_UP): BUT K_UP) + PA_2, PA_3, // D50, D51 + PA_4, PA_5, + /*PA_6, PA_7,*/ // PA_6, PA_7: Moved to allow contiguous analog pins + PC_4, PC_5, + PB_0, PB_1, + PA_6, PA_7, // PA_6: LED D2, PA_7: LED D3 (active LOW) + PE_7, PE_8, // D60, D61 + PE_9, PE_10, + PE_11, PE_12, + PE_13, PE_14, + PE_15, PB_10, + PB_11, PB_12, // D70, D71 + PB_13, PB_14, + PB_4, +}; +#endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG + +#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) +const PinName digitalPin[] = { + // Left Side + //Ext //Int + //GND //5V + //GND //3V3 + PB_12, PB_13, + PB_14, PB_15, + PD_8, PD_9, + PD_10, PD_11, + PD_12, PD_13, + PD_14, PD_15, + PG_2, PG_3, + PG_4, PG_5, + PG_6, PG_7, + PG_8, PC_6, + PC_7, PC_8, + PC_9, PA_8, + PA_9, PA_10, + PA_11, PA_12, // PA_11: USB_DM, PA_12: USB_DP + PA_13, PA_14, + PA_15, PC_10, + PC_11, PC_12, + PD_0, PD_1, + PD_2, PD_3, + PD_4, PD_5, + PD_6, PD_7, + PG_9, PG_10, + PG_11, PG_12, + PG_13, PG_14, + PG_15, PB_3, + PB_4, PB_5, + PB_6, PB_7, + PB_8, PB_9, + + // Right Side + //Int //Ext + //3V3 //3V3 + //BOOT1 //BOOT0 + //GND //GND + //VREF+ //GND + PB_10, PB_11, + PE_14, PE_15, + PE_12, PE_13, + PE_10, PE_11, + PE_8, PE_9, + PG_1, PE_7, + PF_15, PG_0, + PF_13, PF_14, + PF_11, PF_12, + PB_2, // PB1 PB2 Inverted to allow contiguous analog pins + PB_1, + PC_5, PB_0, + PA_7, PC_4, + PA_5, PA_6, + PA_3, PA_4, + PA_1, PA_2, + PC_3, PA_0, // PA_0(WK_UP): BUT K_UP) + PC_1, PC_2, + /*PF_10,*/PC_0, // PF_10: Moved to allow contiguous analog pins + PF_8, /*PF_9,*/ // PF_9: Moved to allow contiguous analog pins + PF_6, PF_7, + PF_10, PF_9, // PF_10: LED D2, PF_9: LED D1 (active low) + PF_4, PF_5, + PF_2, PF_3, + PF_0, PF_1, + PE_6, PC_13, + PE_4, PE_5, // PE_4: BUT K0, PE_5: BUT K1 + PE_2, PE_3, + PE_0, PE_1, +}; +#endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + + /**Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 8; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + _Error_Handler(__FILE__, __LINE__); + } + + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) { + _Error_Handler(__FILE__, __LINE__); + } + + /**Configure the Systick interrupt time + */ + HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000); + + /**Configure the Systick + */ + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); + + /* SysTick_IRQn interrupt configuration */ + HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); +} + +#ifdef __cplusplus +} +#endif |