diff options
Diffstat (limited to 'buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h')
| -rw-r--r-- | buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h | 353 |
1 files changed, 353 insertions, 0 deletions
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h new file mode 100644 index 0000000..4e7e299 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h @@ -0,0 +1,353 @@ +/* + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ +#if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG) +// Right Side +#define PE1 0 +#define PE0 1 +#define PB9 2 +#define PB8 3 +#define PB7 4 +#define PB6 5 +#define PB5 6 +#define PB3 7 +#define PD7 8 +#define PD6 9 +#define PD5 10 +#define PD4 11 +#define PD3 12 +#define PD2 13 +#define PD1 14 +#define PD0 15 +#define PC12 16 +#define PC11 17 +#define PC10 18 +#define PA15 19 +#define PA12 20 // USB_DP +#define PA11 21 // USB_DM +#define PA10 22 +#define PA9 23 +#define PA8 24 +#define PC9 25 +#define PC8 26 +#define PC7 27 +#define PC6 28 +#define PD15 29 +#define PD14 30 +#define PD13 31 +#define PD12 32 +#define PD11 33 +#define PD10 34 +#define PD9 35 +#define PD8 36 +#define PB15 37 +// Left Side +#define PE2 38 +#define PE3 39 +#define PE4 40 // BUT K0 +#define PE5 41 // BUT K1 +#define PE6 42 +#define PC13 43 +#define PC0 44 // A0 +#define PC1 45 // A1 +#define PC2 46 // A2 +#define PC3 47 // A3 +#define PA0 48 // A4/WK_UP: BUT K_UP +#define PA1 49 // A5 +#define PA2 50 // A6 +#define PA3 51 // A7 +#define PA4 52 // A8 +#define PA5 53 // A9 +#define PC4 54 // A10 +#define PC5 55 // A11 +#define PB0 56 // A12 +#define PB1 57 // A13 +#define PA6 58 // LED D2 +#define PA7 59 // LED D3 (active LOW) +#define PE7 60 +#define PE8 61 +#define PE9 62 +#define PE10 63 +#define PE11 64 +#define PE12 65 +#define PE13 66 +#define PE14 67 +#define PE15 68 +#define PB10 69 +#define PB11 70 +#define PB12 71 +#define PB13 72 +#define PB14 73 +#define PB4 74 + +// This must be a literal +#define NUM_DIGITAL_PINS 75 +// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS +#define NUM_ANALOG_INPUTS 14 +#define NUM_ANALOG_FIRST 44 + +// Below ADC, DAC and PWM definitions already done in the core +// Could be redefined here if needed +// ADC resolution is 12bits +//#define ADC_RESOLUTION 12 +//#define DACC_RESOLUTION 12 + +// PWM resolution +//#define PWM_RESOLUTION 8 +//#define PWM_FREQUENCY 20000 +//#define PWM_MAX_DUTY_CYCLE 255 + +// On-board LED pin number +#define LED_D2 PA6 +#define LED_D3 PA7 + +// Board specific button +#define BTN_K_UP PA0 + +#endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG + +#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) +// Left Side +#define PB12 0 +#define PB13 1 +#define PB14 2 +#define PB15 3 +#define PD8 4 +#define PD9 5 +#define PD10 6 +#define PD11 7 +#define PD12 8 +#define PD13 9 +#define PD14 10 +#define PD15 11 +#define PG2 12 +#define PG3 13 +#define PG4 14 +#define PG5 15 +#define PG6 16 +#define PG7 17 +#define PG8 18 +#define PC6 19 +#define PC7 20 +#define PC8 21 +#define PC9 22 +#define PA8 23 +#define PA9 24 +#define PA10 25 +#define PA11 26 // USB_DM +#define PA12 27 // USB_DP +#define PA13 28 +#define PA14 29 +#define PA15 30 +#define PC10 31 +#define PC11 32 +#define PC12 33 +#define PD0 34 +#define PD1 35 +#define PD2 36 +#define PD3 37 +#define PD4 38 +#define PD5 39 +#define PD6 40 +#define PD7 41 +#define PG9 42 +#define PG10 43 +#define PG11 44 +#define PG12 45 +#define PG13 46 +#define PG14 47 +#define PG15 48 +#define PB3 49 +#define PB4 50 +#define PB5 51 +#define PB6 52 +#define PB7 53 +#define PB8 54 +#define PB9 55 + +// Right Side +#define PB10 56 +#define PB11 57 +#define PE14 58 +#define PE15 59 +#define PE12 60 +#define PE13 61 +#define PE10 62 +#define PE11 63 +#define PE8 64 +#define PE9 65 +#define PG1 66 +#define PE7 67 +#define PF15 68 +#define PG0 69 +#define PF13 70 +#define PF14 71 +#define PF11 72 +#define PF12 73 +#define PB2 74 +#define PB1 75 // A0 +#define PC5 76 // A1 +#define PB0 77 // A2 +#define PA7 78 // A3 +#define PC4 79 // A4 +#define PA5 80 // A5 +#define PA6 81 // A6 +#define PA3 82 // A7 +#define PA4 83 // A8 +#define PA1 84 // A9 +#define PA2 85 // A10 +#define PC3 86 // A11 +#define PA0 87 // A12/PA_0(WK_UP): BUT K_UP) +#define PC1 88 // A13 +#define PC2 89 // A14 +#define PC0 90 // A15 +#define PF8 91 // A16 +#define PF6 92 // A17 +#define PF7 93 // A18 +#define PF9 94 // LED D1 (active low) +#define PF10 95 // LED D2 (active low) +#define PF4 96 +#define PF5 97 +#define PF2 98 +#define PF3 99 +#define PF0 100 +#define PF1 101 +#define PE6 102 +#define PC13 103 +#define PE4 104 // BUT K0 +#define PE5 105 // BUT K1 +#define PE2 106 +#define PE3 107 +#define PE0 108 +#define PE1 109 + +// This must be a literal +#define NUM_DIGITAL_PINS 110 +// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS +#define NUM_ANALOG_INPUTS 19 +#define NUM_ANALOG_FIRST 75 + +// On-board LED pin number +#define LED_D2 PF10 +#define LED_D1 PF9 + +// Board specific button +#define BTN_WK_UP PA0 + +#endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG + +#define LED_BUILTIN LED_D2 +#define LED_GREEN LED_D2 + +// On-board user button +#define BTN_K0 PE4 +#define BTN_K1 PE3 +#define USER_BTN BTN_K0 + +// Below SPI and I2C definitions already done in the core +// Could be redefined here if differs from the default one +// SPI Definitions +#define PIN_SPI_MOSI PB15 +#define PIN_SPI_MISO PB14 +#define PIN_SPI_SCK PB13 +#define PIN_SPI_SS PB12 +//#define PIN_SPI_SS1 PB0 // W25Q16 (on board flash) + +// I2C Definitions +#define PIN_WIRE_SDA PB7 +#define PIN_WIRE_SCL PB6 + +// Timer Definitions +//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c +#define TIMER_TONE TIM6 + +// Do not use basic timer: OC is required +#define TIMER_SERVO TIM2 //TODO: advanced-control timers don't work + +// UART Definitions +// Define here Serial instance number to map on Serial generic name +#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2) +// DEBUG_UART could be redefined to print on another instance than 'Serial' +//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3 +// DEBUG_UART baudrate, default: 9600 if not defined +//#define DEBUG_UART_BAUDRATE x +// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART +//#define DEBUG_PINNAME_TX PX_n // PinName used for TX + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#define PIN_SERIAL_RX PA10 +#define PIN_SERIAL_TX PA9 + +/* Extra HAL modules */ +#define HAL_DAC_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial1 +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ |