diff options
Diffstat (limited to 'buildroot/share/PlatformIO/variants/MEEB_3DP/board')
| -rw-r--r-- | buildroot/share/PlatformIO/variants/MEEB_3DP/board/board.h | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/buildroot/share/PlatformIO/variants/MEEB_3DP/board/board.h b/buildroot/share/PlatformIO/variants/MEEB_3DP/board/board.h new file mode 100644 index 0000000..da9ffd8 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MEEB_3DP/board/board.h @@ -0,0 +1,125 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2011 LeafLabs, LLC. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file maple_RET6.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief Private include file for Maple RET6 Edition in boards.h + * + * See maple.h for more information on these definitions. + */ + +#ifndef _BOARDS_GENERIC_STM32F103R_H_ +#define _BOARDS_GENERIC_STM32F103R_H_ + +/* A few of these values will seem strange given that it's a + * high-density board. */ + +#define CYCLES_PER_MICROSECOND 72 +#define SYSTICK_RELOAD_VAL (F_CPU/1000) - 1 /* takes a cycle to reload */ + +// USARTS +#define BOARD_NR_USARTS 5 +#define BOARD_USART1_TX_PIN PA9 +#define BOARD_USART1_RX_PIN PA10 + +#define BOARD_USART2_TX_PIN PA2 +#define BOARD_USART2_RX_PIN PA3 + +#define BOARD_USART3_TX_PIN PB10 +#define BOARD_USART3_RX_PIN PB11 + +#define BOARD_USART4_TX_PIN PC10 +#define BOARD_USART4_RX_PIN PC11 + +#define BOARD_USART5_TX_PIN PC12 +#define BOARD_USART5_RX_PIN PD2 + +/* Note: + * + * SPI3 is unusable due to pin 43 (PB4) and NRST tie-together :(, but + * leave the definitions so as not to clutter things up. This is only + * OK since RET6 Ed. is specifically advertised as a beta board. */ +#define BOARD_NR_SPI 3 +#define BOARD_SPI1_NSS_PIN PA4 +#define BOARD_SPI1_SCK_PIN PA5 +#define BOARD_SPI1_MISO_PIN PA6 +#define BOARD_SPI1_MOSI_PIN PA7 + + + +#define BOARD_SPI2_NSS_PIN PB12 +#define BOARD_SPI2_SCK_PIN PB13 +#define BOARD_SPI2_MISO_PIN PB14 +#define BOARD_SPI2_MOSI_PIN PB15 + + +#define BOARD_SPI3_NSS_PIN PA15 +#define BOARD_SPI3_SCK_PIN PB3 +#define BOARD_SPI3_MISO_PIN PB4 +#define BOARD_SPI3_MOSI_PIN PB5 + + +/* GPIO A to E = 5 * 16 - BOOT1 not used = 79*/ +#define BOARD_NR_GPIO_PINS 51 +/* Note: NOT 19. The missing one is D38 a.k.a. BOARD_BUTTON_PIN, which + * isn't broken out to a header and is thus unusable for PWM. */ +#define BOARD_NR_PWM_PINS 19 +#define BOARD_NR_ADC_PINS 16 +#define BOARD_NR_USED_PINS 7 + +#define BOARD_JTMS_SWDIO_PIN 39 +#define BOARD_JTCK_SWCLK_PIN 40 +#define BOARD_JTDI_PIN 41 +#define BOARD_JTDO_PIN 42 +#define BOARD_NJTRST_PIN 43 + +/* USB configuration. BOARD_USB_DISC_DEV is the GPIO port containing + * the USB_DISC pin, and BOARD_USB_DISC_BIT is that pin's bit. */ +#define BOARD_USB_DISC_DEV GPIOC +#define BOARD_USB_DISC_BIT 12 + +/* + * SDIO Pins + */ +#define BOARD_SDIO_D0 PC8 +#define BOARD_SDIO_D1 PC9 +#define BOARD_SDIO_D2 PC10 +#define BOARD_SDIO_D3 PC11 +#define BOARD_SDIO_CLK PC12 +#define BOARD_SDIO_CMD PD2 + +/* Pin aliases: these give the GPIO port/bit for each pin as an + * enum. These are optional, but recommended. They make it easier to + * write code using low-level GPIO functionality. */ +enum { +PA0,PA1,PA2,PA3,PA4,PA5,PA6,PA7,PA8,PA9,PA10,PA11,PA12,PA13,PA14,PA15, +PB0,PB1,PB2,PB3,PB4,PB5,PB6,PB7,PB8,PB9,PB10,PB11,PB12,PB13,PB14,PB15, +PC0,PC1,PC2,PC3,PC4,PC5,PC6,PC7,PC8,PC9,PC10,PC11,PC12,PC13,PC14,PC15, +PD0,PD1,PD2 +};/* Note PB2 is skipped as this is Boot1 and is not going to be much use as its likely to be pulled permanently low */ + +#endif |