1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
|
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* HAL for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0)
*/
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
#include "HAL.h"
#include "../shared/Delay.h"
#include <Wire.h>
DefaultSerial MSerial(false);
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result, HAL_adc_select;
static const uint8_t pin2sc1a[] = {
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, 3, 19+128, 14+128, 15+128, // 0-13 -> A0-A13
5, 14, 8, 9, 13, 12, 6, 7, 15, 4, // 14-23 are A0-A9
255, 255, 255, 255, 255, 255, 255, // 24-30 are digital only
14+128, 15+128, 17, 18, 4+128, 5+128, 6+128, 7+128, 17+128, // 31-39 are A12-A20
255, 255, 255, 255, 255, 255, 255, 255, 255, // 40-48 are digital only
10+128, 11+128, // 49-50 are A23-A24
255, 255, 255, 255, 255, 255, 255, // 51-57 are digital only
255, 255, 255, 255, 255, 255, // 58-63 (sd card pins) are digital only
3, 19+128, // 64-65 are A10-A11
23, 23+128,// 66-67 are A21-A22 (DAC pins)
1, 1+128, // 68-69 are A25-A26 (unused USB host port on Teensy 3.5)
26, // 70 is Temperature Sensor
18+128 // 71 is Vref
};
/*
// disable interrupts
void cli() { noInterrupts(); }
// enable interrupts
void sei() { interrupts(); }
*/
void HAL_adc_init() {
analog_init();
while (ADC0_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
while (ADC1_SC3 & ADC_SC3_CAL) {}; // Wait for calibration to finish
NVIC_ENABLE_IRQ(IRQ_FTM1);
}
void HAL_clear_reset_source() { }
uint8_t HAL_get_reset_source() {
switch (RCM_SRS0) {
case 128: return RST_POWER_ON; break;
case 64: return RST_EXTERNAL; break;
case 32: return RST_WATCHDOG; break;
// case 8: return RST_LOSS_OF_LOCK; break;
// case 4: return RST_LOSS_OF_CLOCK; break;
// case 2: return RST_LOW_VOLTAGE; break;
}
return 0;
}
extern "C" {
extern char __bss_end;
extern char __heap_start;
extern void* __brkval;
int freeMemory() {
int free_memory;
if ((int)__brkval == 0)
free_memory = ((int)&free_memory) - ((int)&__bss_end);
else
free_memory = ((int)&free_memory) - ((int)__brkval);
return free_memory;
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
const uint16_t pin = pin2sc1a[adc_pin];
if (pin == 0xFF) {
// Digital only
HAL_adc_select = -1;
}
else if (pin & 0x80) {
HAL_adc_select = 1;
ADC1_SC1A = pin & 0x7F;
}
else {
HAL_adc_select = 0;
ADC0_SC1A = pin;
}
}
uint16_t HAL_adc_get_result() {
switch (HAL_adc_select) {
case 0: return ADC0_RA;
case 1: return ADC1_RA;
}
return 0;
}
#endif // __MK64FX512__ || __MK66FX1M0__
|
