1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "tft_io.h"
#include "../../inc/MarlinConfig.h"
#define SSD1963_MADCTL_MY 0x80 // Row Address Order
#define SSD1963_MADCTL_MX 0x40 // Column Address Order
#define SSD1963_MADCTL_MV 0x20 // Row/Column Exchange
#define SSD1963_MADCTL_MH 0x10 // Horizontal Refresh Order
#define SSD1963_MADCTL_BGR 0x08 // RGB-BGR ORDER
#define SSD1963_MADCTL_RGB 0x00
#define SSD1963_MADCTL_ML 0x04 // Vertical Refresh Order
#define SSD1963_MADCTL_FH 0x02 // Flip Horizontal
#define SSD1963_MADCTL_FV 0x01 // Flip Vertical
#define SSD1963_ORIENTATION IF_0((TFT_ORIENTATION) & TFT_EXCHANGE_XY, SSD1963_MADCTL_MV) | \
IF_0((TFT_ORIENTATION) & TFT_INVERT_X, SSD1963_MADCTL_FH) | \
IF_0((TFT_ORIENTATION) & TFT_INVERT_Y, SSD1963_MADCTL_FV)
#if !defined(TFT_COLOR) || TFT_COLOR == TFT_COLOR_RGB
#define SSD1963_COLOR SSD1963_MADCTL_RGB
#elif TFT_COLOR == TFT_COLOR_BGR
#define SSD1963_COLOR SSD1963_MADCTL_BGR
#endif
#define SSD1963_MADCTL_DATA (SSD1963_ORIENTATION) | (SSD1963_COLOR)
#define SSD1963_NOP 0x00 // No Operation
#define SSD1963_SWRESET 0x01 // Software reset
#define SSD1963_RDDPM 0x0A // Read Display Power Mode
#define SSD1963_RDDMADCTL 0x0B // Read Display MADCTL
#define SSD1963_RDDCOLMOD 0x0C // Read Display Pixel Format
#define SSD1963_RDDIM 0x0D // Read Display Image Mode
#define SSD1963_RDDSM 0x0E // Read Display Signal Mode
#define SSD1963_SLPIN 0x10 // Sleep In
#define SSD1963_SLPOUT 0x11 // Sleep Out
#define SSD1963_PTLON 0x12 // Partial Display Mode On
#define SSD1963_NORON 0x13 // Normal Display Mode On
#define SSD1963_INVOFF 0x20 // Display Inversion Off
#define SSD1963_INVON 0x21 // Display Inversion On
#define SSD1963_GAMSET 0x26 // Gamma Set
#define SSD1963_DISPOFF 0x28 // Display Off
#define SSD1963_DISPON 0x29 // Display On
#define SSD1963_CASET 0x2A // Column Address Set
#define SSD1963_RASET 0x2B // Row Address Set
#define SSD1963_RAMWR 0x2C // Memory Write
#define SSD1963_RAMRD 0x2E // Memory Read
#define SSD1963_PTLAR 0x30 // Partial Area
#define SSD1963_VSCRDEF 0x33 // Vertical Scrolling Definition
#define SSD1963_TEOFF 0x34 // Tearing Effect Line OFF
#define SSD1963_TEON 0x35 // Tearing Effect Line ON
#define SSD1963_MADCTL 0x36 // Memory Data Access Control
#define SSD1963_VSCSAD 0x37 // Vertical Scroll Start Address of RAM
#define SSD1963_IDMOFF 0x38 // Idle Mode Off
#define SSD1963_IDMON 0x39 // Idle Mode On
#define SSD1963_WRMEMC 0x3C // Write Memory Continue
#define SSD1963_RDMEMC 0x3E // Read Memory Continue
#define SSD1963_STE 0x44 // Set Tear Scanline
#define SSD1963_GSCAN 0x45 // Get Scanline
#define SSD1963_WRDISBV 0x51 // Write Display Brightness
#define SSD1963_RDDISBV 0x52 // Read Display Brightness
#define SSD1963_WRCTRLD 0x53 // Write CTRL Display
#define SSD1963_RDCTRLD 0x54 // Read CTRL Value Display
#define SSD1963_WRCACE 0x55 // Write Content Adaptive Brightness Control and Color Enhancement
#define SSD1963_RDCABC 0x56 // Read Content Adaptive Brightness Control
#define SSD1963_WRCABCMB 0x5E // Write CABC Minimum Brightness
#define SSD1963_RDCABCMB 0x5F // Read CABC Minimum Brightness
#define SSD1963_RDABCSDR 0x68 // Read Automatic Brightness Control Self-Diagnostic Result
#define SSD1963_RDDDB 0xA1 // Read Device Descriptor Block
#define SSD1963_SLCDMODE 0xB0 // Set the LCD panel mode and resolution
#define SSD1963_SHSYNC 0xB4 // Set HSYNC
#define SSD1963_GHSYNC 0xB5 // Get HSYNC
#define SSD1963_SVSYNC 0xB6 // Set VSYNC
#define SSD1963_GVSYNC 0xB7 // Get VSYNC
#define SSD1963_SGPIOCFG 0xB8 // Set GPIO Conf
#define SSD1963_SGPIOV 0xBA // Set GPIO Value
#define SSD1963_SPWMCFG 0xBE // Set PWM Conf
#define SSD1963_GPWMCFG 0xBF // Get PWM Conf
#define SSD1963_SDBCCFG 0xD0 // Set Dynamic Back Light Config
#define SSD1963_GDBCCFG 0xD1 // Get Dynamic Back Light Config
#define SSD1963_PLLON 0xE0 // PLL Enable
#define SSD1963_PLLMN 0xE2 // Set PLL Multiplier
#define SSD1963_SLSHIFT 0xE6 // Set the LSHIFT (pixel clock) frequency
#define SSD1963_COLMOD 0xF0 // Interface Pixel Format
static const uint16_t ssd1963_init[] = {
DATASIZE_8BIT,
ESC_REG(SSD1963_PLLMN), 0x0023, 0x0002, 0x0054,
ESC_REG(SSD1963_PLLON), 0x0001, ESC_DELAY(10),
ESC_REG(SSD1963_PLLON), 0x0003, ESC_DELAY(10),
ESC_REG(SSD1963_SWRESET), ESC_DELAY(100),
ESC_REG(SSD1963_SLSHIFT), 0x0001, 0x001F, 0x00FF,
ESC_REG(SSD1963_SLCDMODE), 0x0020, 0x0000, 0x0001, 0x00DF, 0x0001, 0x000F, 0x0000,
ESC_REG(SSD1963_SHSYNC), 0x0002, 0x0013, 0x0000, 0x0008, 0x002B, 0x0000, 0x0002, 0x0000,
ESC_REG(SSD1963_SVSYNC), 0x0001, 0x0020, 0x0000, 0x0004, 0x000C, 0x0000, 0x0002,
ESC_REG(SSD1963_SGPIOV), 0x000F,
ESC_REG(SSD1963_SGPIOCFG), 0x0007, 0x0001,
ESC_REG(SSD1963_MADCTL), SSD1963_MADCTL_DATA,
ESC_REG(SSD1963_COLMOD), 0x0003, ESC_DELAY(1),//RBG 565
ESC_REG(SSD1963_NORON),
ESC_REG(SSD1963_DISPON),
ESC_REG(SSD1963_SPWMCFG), 0x0006, 0x00F0, 0x0001, 0x00F0, 0x0000, 0x0000,
ESC_REG(SSD1963_SDBCCFG), 0x000D,
ESC_END
};
|
