blob: d66ffbe4e5d3bed44ee96fbb3c31bf19d8791d3d (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Cohesion3D Mini pin assignments
*/
#if NOT_TARGET(MCU_LPC1769)
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_INFO_NAME "Cohesion3D Mini"
//
// Servos
//
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
//
// Default pins for TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif
#endif
//
// Analog Inputs
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // P0_23
#define TEMP_BED_PIN P0_24_A1 // P0_24
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#ifndef FAN_PIN
#define FAN_PIN P2_06 // FET 3
#endif
//
// Auto fans
//
#define AUTO_FAN_PIN P2_04 // FET 4
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E1_AUTO_FAN_PIN
#define E1_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
#ifndef E2_AUTO_FAN_PIN
#define E2_AUTO_FAN_PIN AUTO_FAN_PIN
#endif
//
// Misc. Functions
//
#define LED_PIN P4_28 // Play LED
//
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN
#define SPINDLE_DIR_PIN P2_06 // FET 3
#endif
//
// LCD / Controller
//
// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
//
// A remote SD card is currently not supported because the pins routed to the EXP2
// connector are shared with the onboard SD card, and Marlin does not support reading
// G-code files from the onboard SD card.
//
#if HAS_WIRED_LCD
#define BEEPER_PIN P0_27 // EXP2-7 - open drain
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10
#if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not currently supported by the Cohesion3D boards"
#endif
#endif // HAS_WIRED_LCD
//
// Ethernet pins
//
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01
|
