Deleted vendor folder

1 files changed, 0 insertions, 442 deletions

diff --git a/vendor/bitflags/CHANGELOG.md b/vendor/bitflags/CHANGELOG.md
deleted file mode 100644
index 5081ed5..0000000
--- a/vendor/bitflags/CHANGELOG.md
+++ /dev/null
@@ -1,442 +0,0 @@
-# 2.4.1
-
-## What's Changed
-* Allow some new pedantic clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/380
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.4.0...2.4.1
-
-# 2.4.0
-
-## What's Changed
-* Remove html_root_url by @eldruin in https://github.com/bitflags/bitflags/pull/368
-* Support unnamed flags by @KodrAus in https://github.com/bitflags/bitflags/pull/371
-* Update smoke test to verify all Clippy and rustc lints by @MitMaro in https://github.com/bitflags/bitflags/pull/374
-* Specify the behavior of bitflags by @KodrAus in https://github.com/bitflags/bitflags/pull/369
-
-## New Contributors
-* @eldruin made their first contribution in https://github.com/bitflags/bitflags/pull/368
-* @MitMaro made their first contribution in https://github.com/bitflags/bitflags/pull/374
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.3...2.4.0
-
-# 2.3.3
-
-## Changes to `-=`
-
-The `-=` operator was incorrectly changed to truncate bits that didn't correspond to valid flags in `2.3.0`. This has
-been fixed up so it once again behaves the same as `-` and `difference`.
-
-## Changes to `!`
-
-The `!` operator previously called `Self::from_bits_truncate`, which would truncate any bits that only partially
-overlapped with a valid flag. It will now use `bits & Self::all().bits()`, so any bits that overlap any bits
-specified by any flag will be respected. This is unlikely to have any practical implications, but enables defining
-a flag like `const ALL = !0` as a way to signal that any bit pattern is a known set of flags.
-
-## Changes to formatting
-
-Zero-valued flags will never be printed. You'll either get `0x0` for empty flags using debug formatting, or the
-set of flags with zero-valued flags omitted for others.
-
-Composite flags will no longer be redundantly printed if there are extra bits to print at the end that don't correspond
-to a valid flag.
-
-## What's Changed
-* Fix up incorrect sub assign behavior and other cleanups by @KodrAus in https://github.com/bitflags/bitflags/pull/366
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.2...2.3.3
-
-# 2.3.2
-
-## What's Changed
-* [doc] [src/lib.rs]  delete redundant path prefix by @OccupyMars2025 in https://github.com/bitflags/bitflags/pull/361
-
-## New Contributors
-* @OccupyMars2025 made their first contribution in https://github.com/bitflags/bitflags/pull/361
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.1...2.3.2
-
-# 2.3.1
-
-## What's Changed
-* Fix Self in flags value expressions by @KodrAus in https://github.com/bitflags/bitflags/pull/355
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.3.0...2.3.1
-
-# 2.3.0
-
-## What's Changed
-* Support ejecting flags types from the bitflags macro by @KodrAus in https://github.com/bitflags/bitflags/pull/351
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.2.1...2.3.0
-
-# 2.2.1
-
-## What's Changed
-* Refactor attribute filtering to apply per-flag by @KodrAus in https://github.com/bitflags/bitflags/pull/345
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.2.0...2.2.1
-
-# 2.2.0
-
-## What's Changed
-* Create SECURITY.md by @KodrAus in https://github.com/bitflags/bitflags/pull/338
-* add docs to describe the behavior of multi-bit flags by @nicholasbishop in https://github.com/bitflags/bitflags/pull/340
-* Add support for bytemuck by @KodrAus in https://github.com/bitflags/bitflags/pull/336
-* Add a top-level macro for filtering attributes by @KodrAus in https://github.com/bitflags/bitflags/pull/341
-
-## New Contributors
-* @nicholasbishop made their first contribution in https://github.com/bitflags/bitflags/pull/340
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.1.0...2.2.0
-
-# 2.1.0
-
-## What's Changed
-* Add docs for the internal Field0 and examples of formatting/parsing by @KodrAus in https://github.com/bitflags/bitflags/pull/328
-* Add support for arbitrary by @KodrAus in https://github.com/bitflags/bitflags/pull/324
-* Fix up missing docs for consts within consts by @KodrAus in https://github.com/bitflags/bitflags/pull/330
-* Ignore clippy lint in generated code by @Jake-Shadle in https://github.com/bitflags/bitflags/pull/331
-
-## New Contributors
-* @Jake-Shadle made their first contribution in https://github.com/bitflags/bitflags/pull/331
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.2...2.1.0
-
-# 2.0.2
-
-## What's Changed
-* Fix up missing isize and usize Bits impls by @KodrAus in https://github.com/bitflags/bitflags/pull/321
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.1...2.0.2
-
-# 2.0.1
-
-## What's Changed
-* Fix up some docs issues by @KodrAus in https://github.com/bitflags/bitflags/pull/309
-* Make empty_flag() const. by @tormeh in https://github.com/bitflags/bitflags/pull/313
-* Fix formatting of multi-bit flags with partial overlap by @KodrAus in https://github.com/bitflags/bitflags/pull/316
-
-## New Contributors
-* @tormeh made their first contribution in https://github.com/bitflags/bitflags/pull/313
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0...2.0.1
-
-# 2.0.0
-
-## What's Changed
-* Fix a typo and call out MSRV bump by @KodrAus in https://github.com/bitflags/bitflags/pull/259
-* BitFlags trait by @arturoc in https://github.com/bitflags/bitflags/pull/220
-* Add a hidden trait to discourage manual impls of BitFlags by @KodrAus in https://github.com/bitflags/bitflags/pull/261
-* Sanitize `Ok` by @konsumlamm in https://github.com/bitflags/bitflags/pull/266
-* Fix bug in `Debug` implementation by @konsumlamm in https://github.com/bitflags/bitflags/pull/268
-* Fix a typo in the generated documentation by @wackbyte in https://github.com/bitflags/bitflags/pull/271
-* Use SPDX license format by @atouchet in https://github.com/bitflags/bitflags/pull/272
-* serde tests fail in CI by @arturoc in https://github.com/bitflags/bitflags/pull/277
-* Fix beta test output by @KodrAus in https://github.com/bitflags/bitflags/pull/279
-* Add example to the README.md file by @tiaanl in https://github.com/bitflags/bitflags/pull/270
-* Iterator over all the enabled options by @arturoc in https://github.com/bitflags/bitflags/pull/278
-* from_bits_(truncate) fail with composite flags by @arturoc in https://github.com/bitflags/bitflags/pull/276
-* Add more platform coverage to CI by @KodrAus in https://github.com/bitflags/bitflags/pull/280
-* rework the way cfgs are handled by @KodrAus in https://github.com/bitflags/bitflags/pull/281
-* Split generated code into two types by @KodrAus in https://github.com/bitflags/bitflags/pull/282
-* expose bitflags iters using nameable types by @KodrAus in https://github.com/bitflags/bitflags/pull/286
-* Support creating flags from their names by @KodrAus in https://github.com/bitflags/bitflags/pull/287
-* Update README.md by @KodrAus in https://github.com/bitflags/bitflags/pull/288
-* Prepare for 2.0.0-rc.1 release by @KodrAus in https://github.com/bitflags/bitflags/pull/289
-* Add missing "if" to contains doc-comment in traits.rs by @rusty-snake in https://github.com/bitflags/bitflags/pull/291
-* Forbid unsafe_code by @fintelia in https://github.com/bitflags/bitflags/pull/294
-* serde: enable no-std support by @nim65s in https://github.com/bitflags/bitflags/pull/296
-* Add a parser for flags formatted as bar-separated-values by @KodrAus in https://github.com/bitflags/bitflags/pull/297
-* Prepare for 2.0.0-rc.2 release by @KodrAus in https://github.com/bitflags/bitflags/pull/299
-* Use strip_prefix instead of starts_with + slice by @QuinnPainter in https://github.com/bitflags/bitflags/pull/301
-* Fix up some clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/302
-* Prepare for 2.0.0-rc.3 release by @KodrAus in https://github.com/bitflags/bitflags/pull/303
-* feat: Add minimum permissions to rust.yml workflow by @gabibguti in https://github.com/bitflags/bitflags/pull/305
-
-## New Contributors
-* @wackbyte made their first contribution in https://github.com/bitflags/bitflags/pull/271
-* @atouchet made their first contribution in https://github.com/bitflags/bitflags/pull/272
-* @tiaanl made their first contribution in https://github.com/bitflags/bitflags/pull/270
-* @rusty-snake made their first contribution in https://github.com/bitflags/bitflags/pull/291
-* @fintelia made their first contribution in https://github.com/bitflags/bitflags/pull/294
-* @nim65s made their first contribution in https://github.com/bitflags/bitflags/pull/296
-* @QuinnPainter made their first contribution in https://github.com/bitflags/bitflags/pull/301
-* @gabibguti made their first contribution in https://github.com/bitflags/bitflags/pull/305
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/1.3.2...2.0.0
-
-# 2.0.0-rc.3
-
-## What's Changed
-* Use strip_prefix instead of starts_with + slice by @QuinnPainter in https://github.com/bitflags/bitflags/pull/301
-* Fix up some clippy lints by @KodrAus in https://github.com/bitflags/bitflags/pull/302
-
-## New Contributors
-* @QuinnPainter made their first contribution in https://github.com/bitflags/bitflags/pull/301
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0-rc.2...2.0.0-rc.3
-
-# 2.0.0-rc.2
-
-## Changes to `serde` serialization
-
-**⚠️ NOTE ⚠️** This release changes the default serialization you'll get if you `#[derive(Serialize, Deserialize)]`
-on your generated flags types. It will now use a formatted string for human-readable formats and the underlying bits
-type for compact formats.
-
-To keep the old behavior, see the [`bitflags-serde-legacy`](https://github.com/KodrAus/bitflags-serde-legacy) library.
-
-## What's Changed
-
-* Add missing "if" to contains doc-comment in traits.rs by @rusty-snake in https://github.com/bitflags/bitflags/pull/291
-* Forbid unsafe_code by @fintelia in https://github.com/bitflags/bitflags/pull/294
-* serde: enable no-std support by @nim65s in https://github.com/bitflags/bitflags/pull/296
-* Add a parser for flags formatted as bar-separated-values by @KodrAus in https://github.com/bitflags/bitflags/pull/297
-
-## New Contributors
-* @rusty-snake made their first contribution in https://github.com/bitflags/bitflags/pull/291
-* @fintelia made their first contribution in https://github.com/bitflags/bitflags/pull/294
-* @nim65s made their first contribution in https://github.com/bitflags/bitflags/pull/296
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/2.0.0-rc.1...2.0.0-rc.2
-
-# 2.0.0-rc.1
-
-This is a big release including a few years worth of work on a new `BitFlags` trait, iteration, and better macro organization for future extensibility.
-
-## What's Changed
-* Fix a typo and call out MSRV bump by @KodrAus in https://github.com/bitflags/bitflags/pull/259
-* BitFlags trait by @arturoc in https://github.com/bitflags/bitflags/pull/220
-* Add a hidden trait to discourage manual impls of BitFlags by @KodrAus in https://github.com/bitflags/bitflags/pull/261
-* Sanitize `Ok` by @konsumlamm in https://github.com/bitflags/bitflags/pull/266
-* Fix bug in `Debug` implementation by @konsumlamm in https://github.com/bitflags/bitflags/pull/268
-* Fix a typo in the generated documentation by @wackbyte in https://github.com/bitflags/bitflags/pull/271
-* Use SPDX license format by @atouchet in https://github.com/bitflags/bitflags/pull/272
-* serde tests fail in CI by @arturoc in https://github.com/bitflags/bitflags/pull/277
-* Fix beta test output by @KodrAus in https://github.com/bitflags/bitflags/pull/279
-* Add example to the README.md file by @tiaanl in https://github.com/bitflags/bitflags/pull/270
-* Iterator over all the enabled options by @arturoc in https://github.com/bitflags/bitflags/pull/278
-* from_bits_(truncate) fail with composite flags by @arturoc in https://github.com/bitflags/bitflags/pull/276
-* Add more platform coverage to CI by @KodrAus in https://github.com/bitflags/bitflags/pull/280
-* rework the way cfgs are handled by @KodrAus in https://github.com/bitflags/bitflags/pull/281
-* Split generated code into two types by @KodrAus in https://github.com/bitflags/bitflags/pull/282
-* expose bitflags iters using nameable types by @KodrAus in https://github.com/bitflags/bitflags/pull/286
-* Support creating flags from their names by @KodrAus in https://github.com/bitflags/bitflags/pull/287
-* Update README.md by @KodrAus in https://github.com/bitflags/bitflags/pull/288
-
-## New Contributors
-* @wackbyte made their first contribution in https://github.com/bitflags/bitflags/pull/271
-* @atouchet made their first contribution in https://github.com/bitflags/bitflags/pull/272
-* @tiaanl made their first contribution in https://github.com/bitflags/bitflags/pull/270
-
-**Full Changelog**: https://github.com/bitflags/bitflags/compare/1.3.2...2.0.0-rc.1
-
-# 1.3.2
-
-- Allow `non_snake_case` in generated flags types ([#256])
-
-[#256]: https://github.com/bitflags/bitflags/pull/256
-
-# 1.3.1
-
-- Revert unconditional `#[repr(transparent)]` ([#252])
-
-[#252]: https://github.com/bitflags/bitflags/pull/252
-
-# 1.3.0 (yanked)
-
-**This release bumps the Minimum Supported Rust Version to `1.46.0`**
-
-- Add `#[repr(transparent)]` ([#187])
-
-- End `empty` doc comment with full stop ([#202])
-
-- Fix typo in crate root docs ([#206])
-
-- Document from_bits_unchecked unsafety ([#207])
-
-- Let `is_all` ignore extra bits ([#211])
-
-- Allows empty flag definition ([#225])
-
-- Making crate accessible from std ([#227])
-
-- Make `from_bits` a const fn ([#229])
-
-- Allow multiple bitflags structs in one macro invocation ([#235])
-
-- Add named functions to perform set operations ([#244])
-
-- Fix typos in method docs ([#245])
-
-- Modernization of the `bitflags` macro to take advantage of newer features and 2018 idioms ([#246])
-
-- Fix regression (in an unreleased feature) and simplify tests ([#247])
-
-- Use `Self` and fix bug when overriding `stringify!` ([#249])
-
-[#187]: https://github.com/bitflags/bitflags/pull/187
-[#202]: https://github.com/bitflags/bitflags/pull/202
-[#206]: https://github.com/bitflags/bitflags/pull/206
-[#207]: https://github.com/bitflags/bitflags/pull/207
-[#211]: https://github.com/bitflags/bitflags/pull/211
-[#225]: https://github.com/bitflags/bitflags/pull/225
-[#227]: https://github.com/bitflags/bitflags/pull/227
-[#229]: https://github.com/bitflags/bitflags/pull/229
-[#235]: https://github.com/bitflags/bitflags/pull/235
-[#244]: https://github.com/bitflags/bitflags/pull/244
-[#245]: https://github.com/bitflags/bitflags/pull/245
-[#246]: https://github.com/bitflags/bitflags/pull/246
-[#247]: https://github.com/bitflags/bitflags/pull/247
-[#249]: https://github.com/bitflags/bitflags/pull/249
-
-# 1.2.1
-
-- Remove extraneous `#[inline]` attributes ([#194])
-
-[#194]: https://github.com/bitflags/bitflags/pull/194
-
-# 1.2.0
-
-- Fix typo: {Lower, Upper}Exp - {Lower, Upper}Hex ([#183])
-
-- Add support for "unknown" bits ([#188])
-
-[#183]: https://github.com/rust-lang-nursery/bitflags/pull/183
-[#188]: https://github.com/rust-lang-nursery/bitflags/pull/188
-
-# 1.1.0
-
-This is a re-release of `1.0.5`, which was yanked due to a bug in the RLS.
-
-# 1.0.5
-
-- Use compiletest_rs flags supported by stable toolchain ([#171])
-
-- Put the user provided attributes first ([#173])
-
-- Make bitflags methods `const` on newer compilers ([#175])
-
-[#171]: https://github.com/rust-lang-nursery/bitflags/pull/171
-[#173]: https://github.com/rust-lang-nursery/bitflags/pull/173
-[#175]: https://github.com/rust-lang-nursery/bitflags/pull/175
-
-# 1.0.4
-
-- Support Rust 2018 style macro imports ([#165])
-
-  ```rust
-  use bitflags::bitflags;
-  ```
-
-[#165]: https://github.com/rust-lang-nursery/bitflags/pull/165
-
-# 1.0.3
-
-- Improve zero value flag handling and documentation ([#157])
-
-[#157]: https://github.com/rust-lang-nursery/bitflags/pull/157
-
-# 1.0.2
-
-- 30% improvement in compile time of bitflags crate ([#156])
-
-- Documentation improvements ([#153])
-
-- Implementation cleanup ([#149])
-
-[#156]: https://github.com/rust-lang-nursery/bitflags/pull/156
-[#153]: https://github.com/rust-lang-nursery/bitflags/pull/153
-[#149]: https://github.com/rust-lang-nursery/bitflags/pull/149
-
-# 1.0.1
-- Add support for `pub(restricted)` specifier on the bitflags struct ([#135])
-- Optimize performance of `all()` when called from a separate crate ([#136])
-
-[#135]: https://github.com/rust-lang-nursery/bitflags/pull/135
-[#136]: https://github.com/rust-lang-nursery/bitflags/pull/136
-
-# 1.0.0
-- **[breaking change]** Macro now generates [associated constants](https://doc.rust-lang.org/reference/items.html#associated-constants) ([#24])
-
-- **[breaking change]** Minimum supported version is Rust **1.20**, due to usage of associated constants
-
-- After being broken in 0.9, the `#[deprecated]` attribute is now supported again ([#112])
-
-- Other improvements to unit tests and documentation ([#106] and [#115])
-
-[#24]: https://github.com/rust-lang-nursery/bitflags/pull/24
-[#106]: https://github.com/rust-lang-nursery/bitflags/pull/106
-[#112]: https://github.com/rust-lang-nursery/bitflags/pull/112
-[#115]: https://github.com/rust-lang-nursery/bitflags/pull/115
-
-## How to update your code to use associated constants
-Assuming the following structure definition:
-```rust
-bitflags! {
-  struct Something: u8 {
-     const FOO = 0b01,
-     const BAR = 0b10
-  }
-}
-```
-In 0.9 and older you could do:
-```rust
-let x = FOO.bits | BAR.bits;
-```
-Now you must use:
-```rust
-let x = Something::FOO.bits | Something::BAR.bits;
-```
-
-# 0.9.1
-- Fix the implementation of `Formatting` traits when other formatting traits were present in scope ([#105])
-
-[#105]: https://github.com/rust-lang-nursery/bitflags/pull/105
-
-# 0.9.0
-- **[breaking change]** Use struct keyword instead of flags to define bitflag types ([#84])
-
-- **[breaking change]** Terminate const items with semicolons instead of commas ([#87])
-
-- Implement the `Hex`, `Octal`, and `Binary` formatting traits ([#86])
-
-- Printing an empty flag value with the `Debug` trait now prints "(empty)" instead of nothing ([#85])
-
-- The `bitflags!` macro can now be used inside of a fn body, to define a type local to that function ([#74])
-
-[#74]: https://github.com/rust-lang-nursery/bitflags/pull/74
-[#84]: https://github.com/rust-lang-nursery/bitflags/pull/84
-[#85]: https://github.com/rust-lang-nursery/bitflags/pull/85
-[#86]: https://github.com/rust-lang-nursery/bitflags/pull/86
-[#87]: https://github.com/rust-lang-nursery/bitflags/pull/87
-
-# 0.8.2
-- Update feature flag used when building bitflags as a dependency of the Rust toolchain
-
-# 0.8.1
-- Allow bitflags to be used as a dependency of the Rust toolchain
-
-# 0.8.0
-- Add support for the experimental `i128` and `u128` integer types ([#57])
-- Add set method: `flags.set(SOME_FLAG, true)` or `flags.set(SOME_FLAG, false)` ([#55])
-  This may break code that defines its own set method
-
-[#55]: https://github.com/rust-lang-nursery/bitflags/pull/55
-[#57]: https://github.com/rust-lang-nursery/bitflags/pull/57
-
-# 0.7.1
-*(yanked)*
-
-# 0.7.0
-- Implement the Extend trait ([#49])
-- Allow definitions inside the `bitflags!` macro to refer to items imported from other modules ([#51])
-
-[#49]: https://github.com/rust-lang-nursery/bitflags/pull/49
-[#51]: https://github.com/rust-lang-nursery/bitflags/pull/51
-
-# 0.6.0
-- The `no_std` feature was removed as it is now the default
-- The `assignment_operators` feature was remove as it is now enabled by default
-- Some clippy suggestions have been applied