Initial commit

1 files changed, 159 insertions, 0 deletions

diff --git a/Marlin/src/HAL/DUE/Servo.cpp b/Marlin/src/HAL/DUE/Servo.cpp
new file mode 100644
index 0000000..5524aa9
--- /dev/null
+++ b/Marlin/src/HAL/DUE/Servo.cpp
@@ -0,0 +1,159 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/*
+  Copyright (c) 2013 Arduino LLC. All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_SERVOS
+
+#include "../shared/servo.h"
+#include "../shared/servo_private.h"
+
+static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
+
+// ------------------------
+/// Interrupt handler for the TC0 channel 1.
+// ------------------------
+void Servo_Handler(timer16_Sequence_t timer, Tc *pTc, uint8_t channel);
+
+#ifdef _useTimer1
+  void HANDLER_FOR_TIMER1() { Servo_Handler(_timer1, TC_FOR_TIMER1, CHANNEL_FOR_TIMER1); }
+#endif
+#ifdef _useTimer2
+  void HANDLER_FOR_TIMER2() { Servo_Handler(_timer2, TC_FOR_TIMER2, CHANNEL_FOR_TIMER2); }
+#endif
+#ifdef _useTimer3
+  void HANDLER_FOR_TIMER3() { Servo_Handler(_timer3, TC_FOR_TIMER3, CHANNEL_FOR_TIMER3); }
+#endif
+#ifdef _useTimer4
+  void HANDLER_FOR_TIMER4() { Servo_Handler(_timer4, TC_FOR_TIMER4, CHANNEL_FOR_TIMER4); }
+#endif
+#ifdef _useTimer5
+  void HANDLER_FOR_TIMER5() { Servo_Handler(_timer5, TC_FOR_TIMER5, CHANNEL_FOR_TIMER5); }
+#endif
+
+void Servo_Handler(timer16_Sequence_t timer, Tc *tc, uint8_t channel) {
+  // clear interrupt
+  tc->TC_CHANNEL[channel].TC_SR;
+  if (Channel[timer] < 0)
+    tc->TC_CHANNEL[channel].TC_CCR |= TC_CCR_SWTRG; // channel set to -1 indicated that refresh interval completed so reset the timer
+  else if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && SERVO(timer, Channel[timer]).Pin.isActive)
+    extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated
+
+  Channel[timer]++;    // increment to the next channel
+  if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
+    tc->TC_CHANNEL[channel].TC_RA = tc->TC_CHANNEL[channel].TC_CV + SERVO(timer,Channel[timer]).ticks;
+    if (SERVO(timer,Channel[timer]).Pin.isActive)    // check if activated
+      extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // its an active channel so pulse it high
+  }
+  else {
+    // finished all channels so wait for the refresh period to expire before starting over
+    tc->TC_CHANNEL[channel].TC_RA =
+      tc->TC_CHANNEL[channel].TC_CV < usToTicks(REFRESH_INTERVAL) - 4
+        ? (unsigned int)usToTicks(REFRESH_INTERVAL) // allow a few ticks to ensure the next OCR1A not missed
+        : tc->TC_CHANNEL[channel].TC_CV + 4;        // at least REFRESH_INTERVAL has elapsed
+    Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
+  }
+}
+
+static void _initISR(Tc *tc, uint32_t channel, uint32_t id, IRQn_Type irqn) {
+  pmc_enable_periph_clk(id);
+  TC_Configure(tc, channel,
+    TC_CMR_TCCLKS_TIMER_CLOCK3 | // MCK/32
+    TC_CMR_WAVE |                // Waveform mode
+    TC_CMR_WAVSEL_UP_RC );       // Counter running up and reset when equals to RC
+
+  /* 84MHz, MCK/32, for 1.5ms: 3937 */
+  TC_SetRA(tc, channel, 2625); // 1ms
+
+  /* Configure and enable interrupt */
+  NVIC_EnableIRQ(irqn);
+  // TC_IER_CPAS: RA Compare
+  tc->TC_CHANNEL[channel].TC_IER = TC_IER_CPAS;
+
+  // Enables the timer clock and performs a software reset to start the counting
+  TC_Start(tc, channel);
+}
+
+void initISR(timer16_Sequence_t timer) {
+  #ifdef _useTimer1
+    if (timer == _timer1)
+      _initISR(TC_FOR_TIMER1, CHANNEL_FOR_TIMER1, ID_TC_FOR_TIMER1, IRQn_FOR_TIMER1);
+  #endif
+  #ifdef _useTimer2
+    if (timer == _timer2)
+      _initISR(TC_FOR_TIMER2, CHANNEL_FOR_TIMER2, ID_TC_FOR_TIMER2, IRQn_FOR_TIMER2);
+  #endif
+  #ifdef _useTimer3
+    if (timer == _timer3)
+      _initISR(TC_FOR_TIMER3, CHANNEL_FOR_TIMER3, ID_TC_FOR_TIMER3, IRQn_FOR_TIMER3);
+  #endif
+  #ifdef _useTimer4
+    if (timer == _timer4)
+      _initISR(TC_FOR_TIMER4, CHANNEL_FOR_TIMER4, ID_TC_FOR_TIMER4, IRQn_FOR_TIMER4);
+  #endif
+  #ifdef _useTimer5
+    if (timer == _timer5)
+      _initISR(TC_FOR_TIMER5, CHANNEL_FOR_TIMER5, ID_TC_FOR_TIMER5, IRQn_FOR_TIMER5);
+  #endif
+}
+
+void finISR(timer16_Sequence_t) {
+  #ifdef _useTimer1
+    TC_Stop(TC_FOR_TIMER1, CHANNEL_FOR_TIMER1);
+  #endif
+  #ifdef _useTimer2
+    TC_Stop(TC_FOR_TIMER2, CHANNEL_FOR_TIMER2);
+  #endif
+  #ifdef _useTimer3
+    TC_Stop(TC_FOR_TIMER3, CHANNEL_FOR_TIMER3);
+  #endif
+  #ifdef _useTimer4
+    TC_Stop(TC_FOR_TIMER4, CHANNEL_FOR_TIMER4);
+  #endif
+  #ifdef _useTimer5
+    TC_Stop(TC_FOR_TIMER5, CHANNEL_FOR_TIMER5);
+  #endif
+}
+
+#endif // HAS_SERVOS
+
+#endif // ARDUINO_ARCH_SAM