Initial commit

1 files changed, 171 insertions, 0 deletions

diff --git a/Marlin/src/gcode/host/M115.cpp b/Marlin/src/gcode/host/M115.cpp
new file mode 100644
index 0000000..0501f3f
--- /dev/null
+++ b/Marlin/src/gcode/host/M115.cpp
@@ -0,0 +1,171 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../gcode.h"
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(M115_GEOMETRY_REPORT)
+  #include "../../module/motion.h"
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE)
+  #include "../../feature/caselight.h"
+#endif
+
+#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+  static void cap_line(PGM_P const name, bool ena=false) {
+    SERIAL_ECHOPGM("Cap:");
+    serialprintPGM(name);
+    SERIAL_CHAR(':', ena ? '1' : '0');
+    SERIAL_EOL();
+  }
+#endif
+
+/**
+ * M115: Capabilities string and extended capabilities report
+ *       If a capability is not reported, hosts should assume
+ *       the capability is not present.
+ */
+void GcodeSuite::M115() {
+  SERIAL_ECHOLNPGM(
+    "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " (" __DATE__ " " __TIME__ ") "
+    "SOURCE_CODE_URL:" SOURCE_CODE_URL " "
+    "PROTOCOL_VERSION:" PROTOCOL_VERSION " "
+    "MACHINE_TYPE:" MACHINE_NAME " "
+    "EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " "
+    #ifdef MACHINE_UUID
+      "UUID:" MACHINE_UUID
+    #endif
+  );
+
+  #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+
+    // PAREN_COMMENTS
+    TERN_(PAREN_COMMENTS, cap_line(PSTR("PAREN_COMMENTS"), true));
+
+    // QUOTED_STRINGS
+    TERN_(GCODE_QUOTED_STRINGS, cap_line(PSTR("QUOTED_STRINGS"), true));
+
+    // SERIAL_XON_XOFF
+    cap_line(PSTR("SERIAL_XON_XOFF"), ENABLED(SERIAL_XON_XOFF));
+
+    // BINARY_FILE_TRANSFER (M28 B1)
+    cap_line(PSTR("BINARY_FILE_TRANSFER"), ENABLED(BINARY_FILE_TRANSFER));
+
+    // EEPROM (M500, M501)
+    cap_line(PSTR("EEPROM"), ENABLED(EEPROM_SETTINGS));
+
+    // Volumetric Extrusion (M200)
+    cap_line(PSTR("VOLUMETRIC"), DISABLED(NO_VOLUMETRICS));
+
+    // AUTOREPORT_TEMP (M155)
+    cap_line(PSTR("AUTOREPORT_TEMP"), ENABLED(AUTO_REPORT_TEMPERATURES));
+
+    // PROGRESS (M530 S L, M531 <file>, M532 X L)
+    cap_line(PSTR("PROGRESS"));
+
+    // Print Job timer M75, M76, M77
+    cap_line(PSTR("PRINT_JOB"), true);
+
+    // AUTOLEVEL (G29)
+    cap_line(PSTR("AUTOLEVEL"), ENABLED(HAS_AUTOLEVEL));
+
+    // RUNOUT (M412, M600)
+    cap_line(PSTR("RUNOUT"), ENABLED(FILAMENT_RUNOUT_SENSOR));
+
+    // Z_PROBE (G30)
+    cap_line(PSTR("Z_PROBE"), ENABLED(HAS_BED_PROBE));
+
+    // MESH_REPORT (M420 V)
+    cap_line(PSTR("LEVELING_DATA"), ENABLED(HAS_LEVELING));
+
+    // BUILD_PERCENT (M73)
+    cap_line(PSTR("BUILD_PERCENT"), ENABLED(LCD_SET_PROGRESS_MANUALLY));
+
+    // SOFTWARE_POWER (M80, M81)
+    cap_line(PSTR("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));
+
+    // TOGGLE_LIGHTS (M355)
+    cap_line(PSTR("TOGGLE_LIGHTS"), ENABLED(CASE_LIGHT_ENABLE));
+    cap_line(PSTR("CASE_LIGHT_BRIGHTNESS"), TERN0(CASE_LIGHT_ENABLE, TERN0(CASELIGHT_USES_BRIGHTNESS, TERN(CASE_LIGHT_USE_NEOPIXEL, true, PWM_PIN(CASE_LIGHT_PIN)))));
+
+    // EMERGENCY_PARSER (M108, M112, M410, M876)
+    cap_line(PSTR("EMERGENCY_PARSER"), ENABLED(EMERGENCY_PARSER));
+
+    // PROMPT SUPPORT (M876)
+    cap_line(PSTR("PROMPT_SUPPORT"), ENABLED(HOST_PROMPT_SUPPORT));
+
+    // SDCARD (M20, M23, M24, etc.)
+    cap_line(PSTR("SDCARD"), ENABLED(SDSUPPORT));
+
+    // REPEAT (M808)
+    cap_line(PSTR("REPEAT"), ENABLED(GCODE_REPEAT_MARKERS));
+
+    // AUTOREPORT_SD_STATUS (M27 extension)
+    cap_line(PSTR("AUTOREPORT_SD_STATUS"), ENABLED(AUTO_REPORT_SD_STATUS));
+
+    // LONG_FILENAME_HOST_SUPPORT (M33)
+    cap_line(PSTR("LONG_FILENAME"), ENABLED(LONG_FILENAME_HOST_SUPPORT));
+
+    // THERMAL_PROTECTION
+    cap_line(PSTR("THERMAL_PROTECTION"), ENABLED(THERMALLY_SAFE));
+
+    // MOTION_MODES (M80-M89)
+    cap_line(PSTR("MOTION_MODES"), ENABLED(GCODE_MOTION_MODES));
+
+    // ARC_SUPPORT (G2-G3)
+    cap_line(PSTR("ARCS"), ENABLED(ARC_SUPPORT));
+
+    // BABYSTEPPING (M290)
+    cap_line(PSTR("BABYSTEPPING"), ENABLED(BABYSTEPPING));
+
+    // CHAMBER_TEMPERATURE (M141, M191)
+    cap_line(PSTR("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER));
+
+    // MEATPACK Compresson
+    cap_line(PSTR("MEATPACK"), ENABLED(MEATPACK));
+
+    // Machine Geometry
+    #if ENABLED(M115_GEOMETRY_REPORT)
+      const xyz_pos_t dmin = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS },
+                      dmax = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
+      xyz_pos_t cmin = dmin, cmax = dmax;
+      apply_motion_limits(cmin);
+      apply_motion_limits(cmax);
+      const xyz_pos_t lmin = dmin.asLogical(), lmax = dmax.asLogical(),
+                      wmin = cmin.asLogical(), wmax = cmax.asLogical();
+      SERIAL_ECHOLNPAIR(
+        "area:{"
+          "full:{"
+            "min:{x:", lmin.x, ",y:", lmin.y, ",z:", lmin.z, "},"
+            "max:{x:", lmax.x, ",y:", lmax.y, ",z:", lmax.z, "}"
+          "},"
+          "work:{"
+            "min:{x:", wmin.x, ",y:", wmin.y, ",z:", wmin.z, "},"
+            "max:{x:", wmax.x, ",y:", wmax.y, ",z:", wmax.z, "}",
+          "}"
+        "}"
+      );
+    #endif
+
+  #endif // EXTENDED_CAPABILITIES_REPORT
+}