Initial commit

1 files changed, 1209 insertions, 0 deletions

diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
new file mode 100644
index 0000000..712ed39
--- /dev/null
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -0,0 +1,1209 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Conditionals_LCD.h
+ * Conditionals that need to be set before Configuration_adv.h or pins.h
+ */
+
+// MKS_LCD12864 is a variant of MKS_MINI_12864
+#if ENABLED(MKS_LCD12864)
+  #define MKS_MINI_12864
+#endif
+
+/**
+ * General Flags that may be set below by specific LCDs
+ *
+ *  DOGLCD                : Run a Graphical LCD through U8GLib (with MarlinUI)
+ *  IS_ULTIPANEL          : Define LCD_PINS_D5/6/7 for direct-connected "Ultipanel" LCDs
+ *  IS_ULTRA_LCD          : Ultra LCD, not necessarily Ultipanel.
+ *  IS_RRD_SC             : Common RRD Smart Controller digital interface pins
+ *  IS_RRD_FG_SC          : Common RRD Full Graphical Smart Controller digital interface pins
+ *  U8GLIB_ST7920         : Most common DOGM display SPI interface, supporting a "lightweight" display mode.
+ *  U8GLIB_SH1106         : SH1106 OLED with I2C interface via U8GLib
+ *  IS_U8GLIB_SSD1306     : SSD1306 OLED with I2C interface via U8GLib
+ *  U8GLIB_SSD1309        : SSD1309 OLED with I2C interface via U8GLib
+ *  U8GLIB_ST7565_64128N  : ST7565 128x64 LCD with SPI interface via U8GLib
+ *  U8GLIB_LM6059_AF      : LM6059 with Hardware SPI via U8GLib
+ */
+#if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
+
+  #define MINIPANEL
+
+#elif ENABLED(CARTESIO_UI)
+
+  #define DOGLCD
+  #define IS_ULTIPANEL 1
+
+#elif EITHER(DWIN_MARLINUI_PORTRAIT, DWIN_MARLINUI_LANDSCAPE)
+
+  #define IS_DWIN_MARLINUI 1
+  #define IS_ULTIPANEL 1
+
+#elif ENABLED(ZONESTAR_LCD)
+
+  #define HAS_ADC_BUTTONS 1
+  #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+  #define ADC_KEY_NUM 8
+  #define IS_ULTIPANEL 1
+
+  // This helps to implement HAS_ADC_BUTTONS menus
+  #define REVERSE_MENU_DIRECTION
+  #define ENCODER_PULSES_PER_STEP 1
+  #define ENCODER_STEPS_PER_MENU_ITEM 1
+  #define ENCODER_FEEDRATE_DEADZONE 2
+
+#elif ENABLED(ZONESTAR_12864LCD)
+  #define DOGLCD
+  #define IS_RRD_SC 1
+  #define U8GLIB_ST7920
+
+#elif ENABLED(ZONESTAR_12864OLED)
+  #define IS_RRD_SC 1
+  #define U8GLIB_SH1106
+
+#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
+  #define IS_RRD_SC 1
+  #define IS_U8GLIB_SSD1306
+
+#elif ENABLED(RADDS_DISPLAY)
+  #define IS_ULTIPANEL 1
+  #define ENCODER_PULSES_PER_STEP 2
+
+#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
+
+  #define DOGLCD
+  #define IS_ULTIPANEL 1
+
+  #if ENABLED(miniVIKI)
+    #define U8GLIB_ST7565_64128N
+  #elif ENABLED(VIKI2)
+    #define U8GLIB_ST7565_64128N
+  #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+    #define U8GLIB_LM6059_AF
+  #elif ENABLED(AZSMZ_12864)
+    #define U8GLIB_ST7565_64128N
+  #endif
+
+#elif ENABLED(OLED_PANEL_TINYBOY2)
+
+  #define IS_U8GLIB_SSD1306
+  #define IS_ULTIPANEL 1
+
+#elif ENABLED(RA_CONTROL_PANEL)
+
+  #define LCD_I2C_TYPE_PCA8574
+  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
+  #define IS_ULTIPANEL 1
+
+#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+  #define DOGLCD
+  #define U8GLIB_ST7920
+  #define IS_ULTIPANEL 1
+
+#elif ENABLED(MKS_12864OLED)
+
+  #define IS_RRD_SC 1
+  #define U8GLIB_SH1106
+
+#elif ENABLED(MKS_12864OLED_SSD1306)
+
+  #define IS_RRD_SC 1
+  #define IS_U8GLIB_SSD1306
+
+#elif ENABLED(FYSETC_242_OLED_12864)
+
+  #define IS_RRD_SC 1
+  #define U8GLIB_SH1106
+
+  #define LED_CONTROL_MENU
+  #define NEOPIXEL_LED
+  #undef NEOPIXEL_TYPE
+  #define NEOPIXEL_TYPE       NEO_RGB
+  #if NEOPIXEL_PIXELS < 3
+    #undef NEOPIXELS_PIXELS
+    #define NEOPIXEL_PIXELS     3
+  #endif
+  #ifndef NEOPIXEL_BRIGHTNESS
+    #define NEOPIXEL_BRIGHTNESS 127
+  #endif
+
+  #if ENABLED(PSU_CONTROL)
+    #define LED_BACKLIGHT_TIMEOUT 10000
+  #endif
+
+#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1)
+
+  #define FYSETC_MINI_12864
+  #define DOGLCD
+  #define IS_ULTIPANEL 1
+  #define LED_COLORS_REDUCE_GREEN
+  #if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
+    #define LED_BACKLIGHT_TIMEOUT 10000
+  #endif
+
+  // Require LED backlighting enabled
+  #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+    #define RGB_LED
+  #elif ENABLED(FYSETC_MINI_12864_2_1)
+    #define LED_CONTROL_MENU
+    #define NEOPIXEL_LED
+    #undef NEOPIXEL_TYPE
+    #define NEOPIXEL_TYPE       NEO_RGB
+    #if NEOPIXEL_PIXELS < 3
+      #undef NEOPIXELS_PIXELS
+      #define NEOPIXEL_PIXELS     3
+    #endif
+    #ifndef NEOPIXEL_BRIGHTNESS
+      #define NEOPIXEL_BRIGHTNESS 127
+    #endif
+    //#define NEOPIXEL_STARTUP_TEST
+  #endif
+
+#elif ENABLED(ULTI_CONTROLLER)
+
+  #define IS_ULTIPANEL 1
+  #define U8GLIB_SSD1309
+  #define LCD_RESET_PIN LCD_PINS_D6 //  This controller need a reset pin
+  #define ENCODER_PULSES_PER_STEP 2
+  #define ENCODER_STEPS_PER_MENU_ITEM 2
+
+#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+
+  #define IS_RRD_SC 1
+  #define LCD_WIDTH 16
+  #define LCD_HEIGHT 2
+
+#elif EITHER(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C)
+
+  #define IS_TFTGLCD_PANEL 1
+  #define IS_ULTIPANEL 1                    // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD
+
+  #if ENABLED(SDSUPPORT) && DISABLED(LCD_PROGRESS_BAR)
+    #define LCD_PROGRESS_BAR
+  #endif
+  #if ENABLED(TFTGLCD_PANEL_I2C)
+    #define LCD_I2C_ADDRESS           0x27  // Must be equal to panel's I2C slave addres
+  #endif
+  #define LCD_USE_I2C_BUZZER                // Enable buzzer on LCD, used for both I2C and SPI buses (LiquidTWI2 not required)
+  #define STD_ENCODER_PULSES_PER_STEP 2
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+  #define LCD_WIDTH                   20    // 20 or 24 chars in line
+  #define LCD_HEIGHT                  10    // Character lines
+  #define LCD_CONTRAST_MIN            127
+  #define LCD_CONTRAST_MAX            255
+  #define DEFAULT_LCD_CONTRAST        250
+  #define CONVERT_TO_EXT_ASCII        // Use extended 128-255 symbols from ASCII table.
+                                      // At this time present conversion only for cyrillic - bg, ru and uk languages.
+                                      // First 7 ASCII symbols in panel font must be replaced with Marlin's special symbols.
+
+#elif ENABLED(CR10_STOCKDISPLAY)
+
+  #define IS_RRD_FG_SC 1
+  #define BOARD_ST7920_DELAY_1 DELAY_NS(125)
+  #define BOARD_ST7920_DELAY_2 DELAY_NS(125)
+  #define BOARD_ST7920_DELAY_3 DELAY_NS(125)
+
+#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, ANET_FULL_GRAPHICS_LCD_ALT_WIRING, BQ_LCD_SMART_CONTROLLER)
+
+  #define IS_RRD_FG_SC 1
+
+#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+  // RepRapDiscount LCD or Graphical LCD with rotary click encoder
+  #define IS_RRD_SC 1
+
+#endif
+
+// ST7920-based graphical displays
+#if ANY(IS_RRD_FG_SC, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
+  #define DOGLCD
+  #define U8GLIB_ST7920
+  #define IS_RRD_SC 1
+#endif
+
+// ST7565 / 64128N graphical displays
+#if EITHER(MAKRPANEL, MINIPANEL)
+  #define IS_ULTIPANEL 1
+  #define DOGLCD
+  #if ENABLED(MAKRPANEL)
+    #define U8GLIB_ST7565_64128N
+  #endif
+#endif
+
+#if ENABLED(IS_U8GLIB_SSD1306)
+  #define U8GLIB_SSD1306
+#endif
+
+#if ENABLED(OVERLORD_OLED)
+  #define IS_ULTIPANEL 1
+  #define U8GLIB_SH1106
+  /**
+   * PCA9632 for buzzer and LEDs via i2c
+   * No auto-inc, red and green leds switched, buzzer
+   */
+  #define PCA9632
+  #define PCA9632_NO_AUTO_INC
+  #define PCA9632_GRN         0x00
+  #define PCA9632_RED         0x02
+  #define PCA9632_BUZZER
+  #define PCA9632_BUZZER_DATA { 0x09, 0x02 }
+
+  #define ENCODER_PULSES_PER_STEP     1 // Overlord uses buttons
+  #define ENCODER_STEPS_PER_MENU_ITEM 1
+#endif
+
+// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
+#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
+  #define HAS_U8GLIB_I2C_OLED 1
+  #define IS_ULTRA_LCD 1
+  #define DOGLCD
+#endif
+
+/**
+ * SPI Ultipanels
+ */
+
+// Basic Ultipanel-like displays
+#if ANY(ULTIMAKERCONTROLLER, IS_RRD_SC, G3D_PANEL, RIGIDBOT_PANEL, PANEL_ONE, U8GLIB_SH1106)
+  #define IS_ULTIPANEL 1
+#endif
+
+// Einstart OLED has Cardinal nav via pins defined in pins_EINSTART-S.h
+#if ENABLED(U8GLIB_SH1106_EINSTART)
+  #define DOGLCD
+  #define IS_ULTIPANEL 1
+#endif
+
+// TFT Compatibility
+#if ANY(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI)
+  #define IS_LEGACY_TFT 1
+  #define TFT_GENERIC
+  #warning "Don't forget to update your TFT settings in Configuration.h."
+#endif
+
+#if ANY(FSMC_GRAPHICAL_TFT, TFT_320x240, TFT_480x320, TFT_LVGL_UI_FSMC)
+  #define TFT_INTERFACE_FSMC
+#elif ANY(SPI_GRAPHICAL_TFT, TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_SPI)
+  #define TFT_INTERFACE_SPI
+#endif
+
+#if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT)
+  #define TFT_CLASSIC_UI
+#elif ANY(TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI)
+  #define TFT_COLOR_UI
+#elif EITHER(TFT_LVGL_UI_FSMC, TFT_LVGL_UI_SPI)
+  #define TFT_LVGL_UI
+#endif
+
+// FSMC/SPI TFT Panels (LVGL)
+#if ENABLED(TFT_LVGL_UI)
+  #define HAS_TFT_LVGL_UI 1
+  #define SERIAL_RUNTIME_HOOK 1
+#endif
+
+// FSMC/SPI TFT Panels
+#if ENABLED(TFT_CLASSIC_UI)
+  #define TFT_SCALED_DOGLCD 1
+#endif
+
+#if TFT_SCALED_DOGLCD
+  #define DOGLCD
+  #define IS_ULTIPANEL 1
+  #define DELAYED_BACKLIGHT_INIT
+#elif HAS_TFT_LVGL_UI
+  #define DELAYED_BACKLIGHT_INIT
+#endif
+
+// Color UI
+#if ENABLED(TFT_COLOR_UI)
+  #define HAS_GRAPHICAL_TFT 1
+  #define IS_ULTIPANEL 1
+#endif
+
+/**
+ * I2C Panels
+ */
+
+#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)
+
+  #define LCD_I2C_TYPE_PCF8575
+  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
+
+  #if ENABLED(LCD_SAINSMART_I2C_2004)
+    #define LCD_WIDTH 20
+    #define LCD_HEIGHT 4
+  #endif
+
+#elif ENABLED(LCD_I2C_PANELOLU2)
+
+  // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
+
+  #define LCD_I2C_TYPE_MCP23017
+  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
+  #define LCD_USE_I2C_BUZZER   // Enable buzzer on LCD (optional)
+  #define IS_ULTIPANEL 1
+
+#elif ENABLED(LCD_I2C_VIKI)
+
+  /**
+   * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
+   *
+   * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
+   * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
+   * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
+   *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
+   */
+  #define LCD_I2C_TYPE_MCP23017
+  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
+  #define LCD_USE_I2C_BUZZER   // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
+  #define IS_ULTIPANEL 1
+
+  #define ENCODER_FEEDRATE_DEADZONE 4
+
+  #define STD_ENCODER_PULSES_PER_STEP 1
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 2
+
+#elif ENABLED(G3D_PANEL)
+
+  #define STD_ENCODER_PULSES_PER_STEP 2
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+
+#elif ANY(IS_RRD_SC, miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2)
+
+  #define STD_ENCODER_PULSES_PER_STEP 4
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+
+#endif
+
+#ifndef STD_ENCODER_PULSES_PER_STEP
+  #if ENABLED(TOUCH_SCREEN)
+    #define STD_ENCODER_PULSES_PER_STEP 2
+  #else
+    #define STD_ENCODER_PULSES_PER_STEP 5
+  #endif
+#endif
+#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+#endif
+#ifndef ENCODER_PULSES_PER_STEP
+  #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
+#endif
+#ifndef ENCODER_STEPS_PER_MENU_ITEM
+  #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
+#endif
+#ifndef ENCODER_FEEDRATE_DEADZONE
+  #define ENCODER_FEEDRATE_DEADZONE 6
+#endif
+
+// Shift register panels
+// ---------------------
+// 2 wire Non-latching LCD SR from:
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
+#if ENABLED(FF_INTERFACEBOARD)
+  #define SR_LCD_3W_NL    // Non latching 3 wire shift register
+  #define IS_ULTIPANEL 1
+#elif ENABLED(SAV_3DLCD)
+  #define SR_LCD_2W_NL    // Non latching 2 wire shift register
+  #define IS_ULTIPANEL 1
+#elif ENABLED(ULTIPANEL)
+  #define IS_ULTIPANEL 1
+#endif
+
+#if EITHER(IS_ULTIPANEL, ULTRA_LCD)
+  #define IS_ULTRA_LCD 1
+#endif
+
+#if EITHER(IS_ULTIPANEL, REPRAPWORLD_KEYPAD)
+  #define IS_NEWPANEL 1
+#endif
+
+#if EITHER(ZONESTAR_LCD, REPRAPWORLD_KEYPAD)
+  #define IS_RRW_KEYPAD 1
+  #ifndef REPRAPWORLD_KEYPAD_MOVE_STEP
+    #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
+  #endif
+#endif
+
+// Aliases for LCD features
+#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
+  #define HAS_DGUS_LCD 1
+#endif
+
+// Extensible UI serial touch screens. (See src/lcd/extui)
+#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
+  #define IS_EXTUI 1
+  #define EXTENSIBLE_UI
+#endif
+
+// Aliases for LCD features
+#if EITHER(IS_ULTRA_LCD, EXTENSIBLE_UI)
+  #define HAS_DISPLAY 1
+#endif
+
+#if IS_ULTRA_LCD
+  #define HAS_WIRED_LCD 1
+  #if ENABLED(DOGLCD)
+    #define HAS_MARLINUI_U8GLIB 1
+  #elif IS_TFTGLCD_PANEL
+    // Neither DOGM nor HD44780. Fully customized interface.
+  #elif DISABLED(HAS_GRAPHICAL_TFT)
+    #define HAS_MARLINUI_HD44780 1
+  #endif
+#endif
+
+#if EITHER(HAS_DISPLAY, GLOBAL_STATUS_MESSAGE)
+  #define HAS_STATUS_MESSAGE 1
+#endif
+
+#if IS_ULTIPANEL && DISABLED(NO_LCD_MENUS)
+  #define HAS_LCD_MENU 1
+#endif
+
+#if HAS_MARLINUI_U8GLIB
+  #ifndef LCD_PIXEL_WIDTH
+    #define LCD_PIXEL_WIDTH 128
+  #endif
+  #ifndef LCD_PIXEL_HEIGHT
+    #define LCD_PIXEL_HEIGHT 64
+  #endif
+#endif
+
+/**
+ *  Multi-Material-Unit supported models
+ */
+#define PRUSA_MMU1      1
+#define PRUSA_MMU2      2
+#define PRUSA_MMU2S     3
+#define SMUFF_EMU_MMU2  12
+#define SMUFF_EMU_MMU2S 13
+
+#ifdef MMU_MODEL
+  #define HAS_MMU 1
+  #if MMU_MODEL == PRUSA_MMU1
+    #define HAS_PRUSA_MMU1 1
+  #elif MMU_MODEL % 10 == PRUSA_MMU2
+    #define HAS_PRUSA_MMU2 1
+  #elif MMU_MODEL % 10 == PRUSA_MMU2S
+    #define HAS_PRUSA_MMU2 1
+    #define HAS_PRUSA_MMU2S 1
+  #endif
+  #if MMU_MODEL >= SMUFF_EMU_MMU2
+    #define HAS_SMUFF 1
+  #endif
+#endif
+
+#undef PRUSA_MMU1
+#undef PRUSA_MMU2
+#undef PRUSA_MMU2S
+#undef SMUFF_EMU_MMU2
+#undef SMUFF_EMU_MMU2S
+
+/**
+ * Extruders have some combination of stepper motors and hotends
+ * so we separate these concepts into the defines:
+ *
+ *  EXTRUDERS    - Number of Selectable Tools
+ *  HOTENDS      - Number of hotends, whether connected or separate
+ *  E_STEPPERS   - Number of actual E stepper motors
+ *  E_MANUAL     - Number of E steppers for LCD move options
+ */
+
+#if EXTRUDERS == 0
+  #undef EXTRUDERS
+  #define EXTRUDERS 0
+  #undef SINGLENOZZLE
+  #undef SWITCHING_EXTRUDER
+  #undef SWITCHING_NOZZLE
+  #undef MIXING_EXTRUDER
+  #undef HOTEND_IDLE_TIMEOUT
+#elif EXTRUDERS > 1
+  #define HAS_MULTI_EXTRUDER 1
+#endif
+
+#if ENABLED(SWITCHING_EXTRUDER)   // One stepper for every two EXTRUDERS
+  #if EXTRUDERS > 4
+    #define E_STEPPERS    3
+  #elif EXTRUDERS > 2
+    #define E_STEPPERS    2
+  #else
+    #define E_STEPPERS    1
+  #endif
+  #if DISABLED(SWITCHING_NOZZLE)
+    #define HOTENDS       E_STEPPERS
+  #endif
+#elif ENABLED(MIXING_EXTRUDER)
+  #define E_STEPPERS      MIXING_STEPPERS
+  #define E_MANUAL        1
+  #if MIXING_STEPPERS == 2
+    #define HAS_DUAL_MIXING 1
+  #endif
+#elif ENABLED(SWITCHING_TOOLHEAD)
+  #define E_STEPPERS      EXTRUDERS
+  #define E_MANUAL        EXTRUDERS
+#elif HAS_PRUSA_MMU2
+  #define E_STEPPERS 1
+#endif
+
+// No inactive extruders with SWITCHING_NOZZLE or Průša MMU1
+#if ENABLED(SWITCHING_NOZZLE) || HAS_PRUSA_MMU1
+  #undef DISABLE_INACTIVE_EXTRUDER
+#endif
+
+// Průša MMU1, MMU 2.0, MMUS 2.0 and SMUFF force SINGLENOZZLE
+#if HAS_MMU
+  #define SINGLENOZZLE
+#endif
+
+#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
+  #undef HOTENDS
+  #define HOTENDS       1
+  #undef HOTEND_OFFSET_X
+  #undef HOTEND_OFFSET_Y
+#endif
+
+#ifndef HOTENDS
+  #define HOTENDS EXTRUDERS
+#endif
+#ifndef E_STEPPERS
+  #define E_STEPPERS EXTRUDERS
+#endif
+#ifndef E_MANUAL
+  #define E_MANUAL EXTRUDERS
+#endif
+
+#if HOTENDS
+  #define HAS_HOTEND 1
+  #ifndef HOTEND_OVERSHOOT
+    #define HOTEND_OVERSHOOT 15
+  #endif
+  #if HOTENDS > 1
+    #define HAS_MULTI_HOTEND 1
+    #define HAS_HOTEND_OFFSET 1
+  #endif
+#else
+  #undef PID_PARAMS_PER_HOTEND
+#endif
+
+// Helper macros for extruder and hotend arrays
+#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
+#define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
+#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1, v1, v1)
+#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
+#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1, v1, v1)
+
+#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
+  #define DO_SWITCH_EXTRUDER 1
+#endif
+
+/**
+ * Default hotend offsets, if not defined
+ */
+#if HAS_HOTEND_OFFSET
+  #ifndef HOTEND_OFFSET_X
+    #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
+  #endif
+  #ifndef HOTEND_OFFSET_Y
+    #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
+  #endif
+  #ifndef HOTEND_OFFSET_Z
+    #define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
+  #endif
+#endif
+
+/**
+ * DISTINCT_E_FACTORS affects how some E factors are accessed
+ */
+#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
+  #define DISTINCT_E E_STEPPERS
+  #define XYZE_N (XYZ + E_STEPPERS)
+  #define E_INDEX_N(E) (E)
+  #define E_AXIS_N(E) AxisEnum(E_AXIS + E)
+  #define UNUSED_E(E) NOOP
+#else
+  #undef DISTINCT_E_FACTORS
+  #define DISTINCT_E 1
+  #define XYZE_N XYZE
+  #define E_INDEX_N(E) 0
+  #define E_AXIS_N(E) E_AXIS
+  #define UNUSED_E(E) UNUSED(E)
+#endif
+
+#if ENABLED(DWIN_CREALITY_LCD)
+  #define SERIAL_CATCHALL 0
+  #ifndef LCD_SERIAL_PORT
+    #define LCD_SERIAL_PORT 3 // Creality 4.x board
+  #endif
+#endif
+
+/**
+ * The BLTouch Probe emulates a servo probe
+ * and uses "special" angles for its state.
+ */
+#if ENABLED(BLTOUCH)
+  #ifndef Z_PROBE_SERVO_NR
+    #define Z_PROBE_SERVO_NR 0
+  #endif
+  #undef DEACTIVATE_SERVOS_AFTER_MOVE
+
+  // Always disable probe pin inverting for BLTouch
+  #undef Z_MIN_PROBE_ENDSTOP_INVERTING
+  #define Z_MIN_PROBE_ENDSTOP_INVERTING false
+  #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+    #undef Z_MIN_ENDSTOP_INVERTING
+    #define Z_MIN_ENDSTOP_INVERTING false
+  #endif
+#endif
+
+/**
+ * Set a flag for a servo probe (or BLTouch)
+ */
+#ifdef Z_PROBE_SERVO_NR
+  #define HAS_Z_SERVO_PROBE 1
+#endif
+#if ANY(HAS_Z_SERVO_PROBE, SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
+  #define HAS_SERVO_ANGLES 1
+#endif
+#if !HAS_SERVO_ANGLES
+  #undef EDITABLE_SERVO_ANGLES
+#endif
+
+/**
+ * Set flags for enabled probes
+ */
+#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE)
+  #define HAS_BED_PROBE 1
+#endif
+
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #if NUM_RUNOUT_SENSORS >= 1
+    #ifndef FIL_RUNOUT1_STATE
+      #define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT1_PULLUP
+      #define FIL_RUNOUT1_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT1_PULLDOWN
+      #define FIL_RUNOUT1_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 2
+    #ifndef FIL_RUNOUT2_STATE
+      #define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT2_PULLUP
+      #define FIL_RUNOUT2_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT2_PULLDOWN
+      #define FIL_RUNOUT2_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 3
+    #ifndef FIL_RUNOUT3_STATE
+      #define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT3_PULLUP
+      #define FIL_RUNOUT3_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT3_PULLDOWN
+      #define FIL_RUNOUT3_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 4
+    #ifndef FIL_RUNOUT4_STATE
+      #define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT4_PULLUP
+      #define FIL_RUNOUT4_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT4_PULLDOWN
+      #define FIL_RUNOUT4_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 5
+    #ifndef FIL_RUNOUT5_STATE
+      #define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT5_PULLUP
+      #define FIL_RUNOUT5_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT5_PULLDOWN
+      #define FIL_RUNOUT5_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 6
+    #ifndef FIL_RUNOUT6_STATE
+      #define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT6_PULLUP
+      #define FIL_RUNOUT6_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT6_PULLDOWN
+      #define FIL_RUNOUT6_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 7
+    #ifndef FIL_RUNOUT7_STATE
+      #define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT7_PULLUP
+      #define FIL_RUNOUT7_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT7_PULLDOWN
+      #define FIL_RUNOUT7_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 8
+    #ifndef FIL_RUNOUT8_STATE
+      #define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT8_PULLUP
+      #define FIL_RUNOUT8_PULLUP FIL_RUNOUT_PULLUP
+    #endif
+    #ifndef FIL_RUNOUT8_PULLDOWN
+      #define FIL_RUNOUT8_PULLDOWN FIL_RUNOUT_PULLDOWN
+    #endif
+  #endif
+#endif // FILAMENT_RUNOUT_SENSOR
+
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
+  #undef PROBE_MANUALLY
+#endif
+
+#if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
+  #define PROBE_SELECTED 1
+#endif
+
+#if HAS_BED_PROBE
+  #if DISABLED(NOZZLE_AS_PROBE)
+    #define HAS_PROBE_XY_OFFSET 1
+  #endif
+  #if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+    #define HAS_CUSTOM_PROBE_PIN 1
+  #endif
+  #if Z_HOME_DIR < 0 && (!HAS_CUSTOM_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING))
+    #define HOMING_Z_WITH_PROBE 1
+  #endif
+  #ifndef Z_PROBE_LOW_POINT
+    #define Z_PROBE_LOW_POINT -5
+  #endif
+  #if ENABLED(Z_PROBE_ALLEN_KEY)
+    #define PROBE_TRIGGERED_WHEN_STOWED_TEST 1 // Extra test for Allen Key Probe
+  #endif
+  #if MULTIPLE_PROBING > 1
+    #if EXTRA_PROBING > 0
+      #define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING)
+    #else
+      #define TOTAL_PROBING MULTIPLE_PROBING
+    #endif
+  #endif
+  #if ENABLED(PREHEAT_BEFORE_PROBING)
+    #ifndef PROBING_NOZZLE_TEMP
+      #define PROBING_NOZZLE_TEMP 0
+    #endif
+    #ifndef PROBING_BED_TEMP
+      #define PROBING_BED_TEMP 0
+    #endif
+  #endif
+  #if ENABLED(PREHEAT_BEFORE_LEVELING)
+    #ifndef LEVELING_NOZZLE_TEMP
+      #define LEVELING_NOZZLE_TEMP 0
+    #endif
+    #ifndef LEVELING_BED_TEMP
+      #define LEVELING_BED_TEMP 0
+    #endif
+  #endif
+#else
+  // Clear probe pin settings when no probe is selected
+  #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+  #undef USE_PROBE_FOR_Z_HOMING
+#endif
+
+#if Z_HOME_DIR > 0
+  #define HOME_Z_FIRST // If homing away from BED do Z first
+#endif
+
+/**
+ * Set granular options based on the specific type of leveling
+ */
+#if ENABLED(AUTO_BED_LEVELING_UBL)
+  #undef LCD_BED_LEVELING
+  #if ENABLED(DELTA)
+    #define UBL_SEGMENTED 1
+  #endif
+#endif
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
+  #define ABL_PLANAR 1
+#endif
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
+  #define ABL_GRID 1
+#endif
+#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
+  #define HAS_ABL_NOT_UBL 1
+#endif
+#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
+  #define HAS_MESH 1
+#endif
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
+  #define NEEDS_THREE_PROBE_POINTS 1
+#endif
+#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
+  #define HAS_ABL_OR_UBL 1
+  #if DISABLED(PROBE_MANUALLY)
+    #define HAS_AUTOLEVEL 1
+  #endif
+#endif
+#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
+  #define HAS_LEVELING 1
+  #if DISABLED(AUTO_BED_LEVELING_UBL)
+    #define PLANNER_LEVELING 1
+  #endif
+#endif
+#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST)
+  #define HAS_PROBING_PROCEDURE 1
+#endif
+#if !HAS_LEVELING
+  #undef PROBE_MANUALLY
+  #undef RESTORE_LEVELING_AFTER_G28
+  #undef ENABLE_LEVELING_AFTER_G28
+#endif
+
+#ifdef GRID_MAX_POINTS_X
+  #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
+  #define GRID_LOOP(A,B) LOOP_L_N(A, GRID_MAX_POINTS_X) LOOP_L_N(B, GRID_MAX_POINTS_Y)
+#endif
+
+// Slim menu optimizations
+#if ENABLED(SLIM_LCD_MENUS)
+  #define BOOT_MARLIN_LOGO_SMALL
+#endif
+
+/**
+ * CoreXY, CoreXZ, and CoreYZ - and their reverse
+ */
+#if EITHER(COREXY, COREYX)
+  #define CORE_IS_XY 1
+#endif
+#if EITHER(COREXZ, COREZX)
+  #define CORE_IS_XZ 1
+#endif
+#if EITHER(COREYZ, COREZY)
+  #define CORE_IS_YZ 1
+#endif
+#if CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ
+  #define IS_CORE 1
+#endif
+#if IS_CORE
+  #if CORE_IS_XY
+    #define CORE_AXIS_1 A_AXIS
+    #define CORE_AXIS_2 B_AXIS
+    #define NORMAL_AXIS Z_AXIS
+  #elif CORE_IS_XZ
+    #define CORE_AXIS_1 A_AXIS
+    #define NORMAL_AXIS Y_AXIS
+    #define CORE_AXIS_2 C_AXIS
+  #elif CORE_IS_YZ
+    #define NORMAL_AXIS X_AXIS
+    #define CORE_AXIS_1 B_AXIS
+    #define CORE_AXIS_2 C_AXIS
+  #endif
+  #define CORESIGN(n) (ANY(COREYX, COREZX, COREZY) ? (-(n)) : (n))
+#elif ENABLED(MARKFORGED_XY)
+  // Markforged kinematics
+  #define CORE_AXIS_1 A_AXIS
+  #define CORE_AXIS_2 B_AXIS
+  #define NORMAL_AXIS Z_AXIS
+#endif
+
+#if ENABLED(MORGAN_SCARA)
+  #define IS_SCARA 1
+  #define IS_KINEMATIC 1
+#elif ENABLED(DELTA)
+  #define IS_KINEMATIC 1
+#else
+  #define IS_CARTESIAN 1
+  #if !IS_CORE
+    #define IS_FULL_CARTESIAN 1
+  #endif
+#endif
+
+// This flag indicates some kind of jerk storage is needed
+#if EITHER(CLASSIC_JERK, IS_KINEMATIC)
+  #define HAS_CLASSIC_JERK 1
+#endif
+
+#if DISABLED(CLASSIC_JERK)
+  #define HAS_JUNCTION_DEVIATION 1
+#endif
+
+// E jerk exists with JD disabled (of course) but also when Linear Advance is disabled on Delta/SCARA
+#if ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE))
+  #define HAS_CLASSIC_E_JERK 1
+#endif
+
+#if SERIAL_PORT == -1 || SERIAL_PORT_2 == -1
+  #define HAS_USB_SERIAL 1
+#endif
+#if SERIAL_PORT_2 == -2
+  #define HAS_ETHERNET 1
+#endif
+
+// Fallback Stepper Driver types that don't depend on Configuration_adv.h
+#ifndef X_DRIVER_TYPE
+  #define X_DRIVER_TYPE  A4988
+#endif
+#ifndef X2_DRIVER_TYPE
+  #define X2_DRIVER_TYPE A4988
+#endif
+#ifndef Y_DRIVER_TYPE
+  #define Y_DRIVER_TYPE  A4988
+#endif
+#ifndef Y2_DRIVER_TYPE
+  #define Y2_DRIVER_TYPE A4988
+#endif
+#ifndef Z_DRIVER_TYPE
+  #define Z_DRIVER_TYPE  A4988
+#endif
+#ifndef Z2_DRIVER_TYPE
+  #define Z2_DRIVER_TYPE A4988
+#endif
+#ifndef Z3_DRIVER_TYPE
+  #define Z3_DRIVER_TYPE A4988
+#endif
+#ifndef Z4_DRIVER_TYPE
+  #define Z4_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 0
+  #undef E0_DRIVER_TYPE
+#elif !defined(E0_DRIVER_TYPE)
+  #define E0_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 1
+  #undef E1_DRIVER_TYPE
+#elif !defined(E1_DRIVER_TYPE)
+  #define E1_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 2
+  #undef E2_DRIVER_TYPE
+#elif !defined(E2_DRIVER_TYPE)
+  #define E2_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 3
+  #undef E3_DRIVER_TYPE
+#elif !defined(E3_DRIVER_TYPE)
+  #define E3_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 4
+  #undef E4_DRIVER_TYPE
+#elif !defined(E4_DRIVER_TYPE)
+  #define E4_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 5
+  #undef E5_DRIVER_TYPE
+#elif !defined(E5_DRIVER_TYPE)
+  #define E5_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 6
+  #undef E6_DRIVER_TYPE
+#elif !defined(E6_DRIVER_TYPE)
+  #define E6_DRIVER_TYPE A4988
+#endif
+#if E_STEPPERS <= 7
+  #undef E7_DRIVER_TYPE
+#elif !defined(E7_DRIVER_TYPE)
+  #define E7_DRIVER_TYPE A4988
+#endif
+
+// Fallback axis inverting
+#ifndef INVERT_X_DIR
+  #define INVERT_X_DIR false
+#endif
+#ifndef INVERT_Y_DIR
+  #define INVERT_Y_DIR false
+#endif
+#ifndef INVERT_Z_DIR
+  #define INVERT_Z_DIR false
+#endif
+#ifndef INVERT_E_DIR
+  #define INVERT_E_DIR false
+#endif
+
+/**
+ * This setting is also used by M109 when trying to calculate
+ * a ballpark safe margin to prevent wait-forever situation.
+ */
+#ifndef EXTRUDE_MINTEMP
+  #define EXTRUDE_MINTEMP 170
+#endif
+
+/**
+ * TFT Displays
+ *
+ * Configure parameters for TFT displays:
+ *  - TFT_DEFAULT_ORIENTATION
+ *  - TFT_DRIVER
+ *  - TFT_WIDTH
+ *  - TFT_HEIGHT
+ *  - TFT_INTERFACE_(SPI|FSMC)
+ *  - TFT_COLOR
+ *  - GRAPHICAL_TFT_UPSCALE
+ */
+#if ENABLED(MKS_TS35_V2_0)          // Most common: ST7796
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
+  #define TFT_RES_480x320
+  #define TFT_INTERFACE_SPI
+#elif ENABLED(MKS_ROBIN_TFT24)      // Most common: ST7789
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
+  #define TFT_RES_320x240
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(MKS_ROBIN_TFT28)      // Most common: ST7789
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
+  #define TFT_RES_320x240
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(MKS_ROBIN_TFT32)      // Most common: ST7789
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
+  #define TFT_RES_320x240
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(MKS_ROBIN_TFT35)      // Most common: ILI9488
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
+  #define TFT_RES_480x320
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(MKS_ROBIN_TFT43)
+  #define TFT_DEFAULT_ORIENTATION 0
+  #define TFT_DRIVER SSD1963
+  #define TFT_RES_480x272
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(MKS_ROBIN_TFT_V1_1R)  // ILI9328 or R61505
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
+  #define TFT_RES_320x240
+  #define TFT_INTERFACE_FSMC
+#elif EITHER(TFT_TRONXY_X5SA, ANYCUBIC_TFT35) // ILI9488
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
+  #define TFT_DRIVER ILI9488
+  #define TFT_RES_480x320
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(LONGER_LK_TFT28)
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
+  #define TFT_RES_320x240
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(ANET_ET4_TFT28)       // ST7789
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_Y)
+  #define TFT_RES_320x240
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(ANET_ET5_TFT35)       // ST7796
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
+  #define TFT_RES_480x320
+  #define TFT_INTERFACE_FSMC
+#elif ENABLED(TFT_GENERIC)
+  #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
+  #if NONE(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320)
+    #define TFT_RES_320x240
+  #endif
+  #if NONE(TFT_INTERFACE_FSMC, TFT_INTERFACE_SPI)
+    #define TFT_INTERFACE_SPI
+  #endif
+#endif
+
+#if ENABLED(TFT_RES_320x240)
+  #define TFT_WIDTH  320
+  #define TFT_HEIGHT 240
+  #define GRAPHICAL_TFT_UPSCALE 2
+#elif ENABLED(TFT_RES_480x272)
+  #define TFT_WIDTH  480
+  #define TFT_HEIGHT 272
+  #define GRAPHICAL_TFT_UPSCALE 2
+#elif ENABLED(TFT_RES_480x320)
+  #define TFT_WIDTH  480
+  #define TFT_HEIGHT 320
+  #define GRAPHICAL_TFT_UPSCALE 3
+#endif
+
+// FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h
+#if ENABLED(TFT_INTERFACE_FSMC)
+  #define HAS_FSMC_TFT 1
+  #if TFT_SCALED_DOGLCD
+    #define HAS_FSMC_GRAPHICAL_TFT 1
+  #elif HAS_TFT_LVGL_UI
+    #define HAS_TFT_LVGL_UI_FSMC 1
+  #endif
+#elif ENABLED(TFT_INTERFACE_SPI)
+  #define HAS_SPI_TFT 1
+  #if TFT_SCALED_DOGLCD
+    #define HAS_SPI_GRAPHICAL_TFT 1
+  #elif HAS_TFT_LVGL_UI
+    #define HAS_TFT_LVGL_UI_SPI 1
+  #endif
+#endif
+
+#if ENABLED(TFT_COLOR_UI)
+  #if TFT_HEIGHT == 240
+    #if ENABLED(TFT_INTERFACE_SPI)
+      #define TFT_320x240_SPI
+    #elif ENABLED(TFT_INTERFACE_FSMC)
+      #define TFT_320x240
+    #endif
+  #elif TFT_HEIGHT == 320
+    #if ENABLED(TFT_INTERFACE_SPI)
+      #define TFT_480x320_SPI
+    #elif ENABLED(TFT_INTERFACE_FSMC)
+      #define TFT_480x320
+    #endif
+  #elif TFT_HEIGHT == 272
+    #if ENABLED(TFT_INTERFACE_SPI)
+      #define TFT_480x272_SPI
+    #elif ENABLED(TFT_INTERFACE_FSMC)
+      #define TFT_480x272
+    #endif
+  #endif
+#endif
+
+#if EITHER(TFT_320x240, TFT_320x240_SPI)
+  #define HAS_UI_320x240 1
+#elif EITHER(TFT_480x320, TFT_480x320_SPI)
+  #define HAS_UI_480x320 1
+#elif EITHER(TFT_480x272, TFT_480x272_SPI)
+  #define HAS_UI_480x272 1
+#endif
+#if ANY(HAS_UI_320x240, HAS_UI_480x320, HAS_UI_480x272)
+  #define LCD_HEIGHT TERN(TOUCH_SCREEN, 6, 7) // Fewer lines with touch buttons onscreen
+#endif
+
+// This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046'
+#if ENABLED(TOUCH_SCREEN) && !HAS_GRAPHICAL_TFT
+  #undef TOUCH_SCREEN
+  #if ENABLED(TFT_CLASSIC_UI)
+    #define HAS_TOUCH_BUTTONS 1
+  #endif
+#endif
+
+// XPT2046_** Compatibility
+#if !(defined(TOUCH_CALIBRATION_X) || defined(TOUCH_CALIBRATION_Y) || defined(TOUCH_OFFSET_X) || defined(TOUCH_OFFSET_Y) || defined(TOUCH_ORIENTATION))
+  #if defined(XPT2046_X_CALIBRATION) && defined(XPT2046_Y_CALIBRATION) && defined(XPT2046_X_OFFSET) && defined(XPT2046_Y_OFFSET)
+    #define TOUCH_CALIBRATION_X  XPT2046_X_CALIBRATION
+    #define TOUCH_CALIBRATION_Y  XPT2046_Y_CALIBRATION
+    #define TOUCH_OFFSET_X       XPT2046_X_OFFSET
+    #define TOUCH_OFFSET_Y       XPT2046_Y_OFFSET
+    #define TOUCH_ORIENTATION    TOUCH_LANDSCAPE
+  #endif
+#endif