Initial commit

1 files changed, 940 insertions, 0 deletions

diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
new file mode 100644
index 0000000..8ae6ab6
--- /dev/null
+++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
@@ -0,0 +1,940 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+//
+// status_screen_DOGM.cpp
+// Standard Status Screen for Graphical Display
+//
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI)
+
+#include "dogm_Statusscreen.h"
+#include "marlinui_DOGM.h"
+#include "../marlinui.h"
+#include "../lcdprint.h"
+#include "../../libs/numtostr.h"
+
+#include "../../module/motion.h"
+#include "../../module/temperature.h"
+
+#include "../../gcode/parser.h" // for units (and volumetric)
+
+#if ENABLED(LCD_SHOW_E_TOTAL)
+  #include "../../MarlinCore.h" // for printingIsActive(), marlin_state and MF_SD_COMPLETE
+#endif
+
+#if ENABLED(FILAMENT_LCD_DISPLAY)
+  #include "../../feature/filwidth.h"
+  #include "../../module/planner.h"
+#endif
+
+#if HAS_CUTTER
+  #include "../../feature/spindle_laser.h"
+#endif
+
+#if HAS_POWER_MONITOR
+  #include "../../feature/power_monitor.h"
+#endif
+
+#if ENABLED(SDSUPPORT)
+  #include "../../sd/cardreader.h"
+#endif
+
+#if HAS_PRINT_PROGRESS
+  #include "../../module/printcounter.h"
+#endif
+
+#if HAS_DUAL_MIXING
+  #include "../../feature/mixing.h"
+#endif
+
+#define X_LABEL_POS      3
+#define X_VALUE_POS     11
+#define XYZ_SPACING     37
+
+#define X_LABEL_POS_IN (X_LABEL_POS - 2)
+#define X_VALUE_POS_IN (X_VALUE_POS - 5)
+#define XYZ_SPACING_IN (XYZ_SPACING + 9)
+
+#define XYZ_BASELINE    (30 + INFO_FONT_ASCENT)
+#define EXTRAS_BASELINE (40 + INFO_FONT_ASCENT)
+#define STATUS_BASELINE (LCD_PIXEL_HEIGHT - INFO_FONT_DESCENT)
+
+#if ANIM_HBCC
+  enum HeatBits : uint8_t {
+    HEATBIT_HOTEND,
+    HEATBIT_BED = HOTENDS,
+    HEATBIT_CHAMBER,
+    HEATBIT_CUTTER
+  };
+  IF<(HEATBIT_CUTTER > 7), uint16_t, uint8_t>::type heat_bits;
+#endif
+
+#if ANIM_HOTEND
+  #define HOTEND_ALT(N) TEST(heat_bits, HEATBIT_HOTEND + N)
+#else
+  #define HOTEND_ALT(N) false
+#endif
+#if ANIM_BED
+  #define BED_ALT() TEST(heat_bits, HEATBIT_BED)
+#else
+  #define BED_ALT() false
+#endif
+#if ANIM_CHAMBER
+  #define CHAMBER_ALT() TEST(heat_bits, HEATBIT_CHAMBER)
+#else
+  #define CHAMBER_ALT() false
+#endif
+#if ANIM_CUTTER
+  #define CUTTER_ALT(N) TEST(heat_bits, HEATBIT_CUTTER)
+#else
+  #define CUTTER_ALT() false
+#endif
+
+#if DO_DRAW_HOTENDS
+  #define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
+#endif
+
+#if EITHER(DO_DRAW_BED, DO_DRAW_HOTENDS)
+  #define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)
+#endif
+
+#if HAS_POWER_MONITOR
+
+  void display_power_monitor(const uint8_t x, const uint8_t y) {
+
+    lcd_moveto(x, y);
+
+    #if HAS_POWER_MONITOR_WATTS
+      const bool wflag = power_monitor.power_display_enabled();
+    #endif
+    #if ENABLED(POWER_MONITOR_CURRENT)
+      const bool iflag = power_monitor.current_display_enabled();
+    #endif
+    #if HAS_POWER_MONITOR_VREF
+      const bool vflag = power_monitor.voltage_display_enabled();
+    #endif
+
+    #if HAS_POWER_MONITOR_WATTS
+      // Cycle between current, voltage, and power
+      if (ELAPSED(millis(), power_monitor.display_item_ms)) {
+        power_monitor.display_item_ms = millis() + 1000UL;
+        ++power_monitor.display_item;
+      }
+    #elif ENABLED(POWER_MONITOR_CURRENT)
+      power_monitor.display_item = 0;
+    #elif HAS_POWER_MONITOR_VREF
+      power_monitor.display_item = 1;
+    #endif
+
+    // ensure we have the right one selected for display
+    for (uint8_t i = 0; i < 3; i++) {
+      #if ENABLED(POWER_MONITOR_CURRENT)
+        if (power_monitor.display_item == 0 && !iflag) ++power_monitor.display_item;
+      #endif
+      #if HAS_POWER_MONITOR_VREF
+        if (power_monitor.display_item == 1 && !vflag) ++power_monitor.display_item;
+      #endif
+      #if HAS_POWER_MONITOR_WATTS
+        if (power_monitor.display_item == 2 && !wflag) ++power_monitor.display_item;
+      #endif
+      if (power_monitor.display_item >= 3) power_monitor.display_item = 0;
+    }
+
+    switch (power_monitor.display_item) {
+      #if ENABLED(POWER_MONITOR_CURRENT)                // Current
+        case 0: if (iflag) power_monitor.draw_current(); break;
+      #endif
+      #if HAS_POWER_MONITOR_VREF                        // Voltage
+        case 1: if (vflag) power_monitor.draw_voltage(); break;
+      #endif
+      #if HAS_POWER_MONITOR_WATTS                       // Power
+        case 2: if (wflag) power_monitor.draw_power(); break;
+      #endif
+      default: break;
+    }
+  }
+#endif
+
+#define PROGRESS_BAR_X 54
+#define PROGRESS_BAR_Y (EXTRAS_BASELINE + 1)
+#define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
+
+FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) {
+  const char *str = i16tostr3rj(temp);
+  const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1;
+  lcd_put_u8str(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty, &str[3-len]);
+  lcd_put_wchar(LCD_STR_DEGREE[0]);
+}
+
+#if DO_DRAW_HOTENDS
+
+  // Draw hotend bitmap with current and target temperatures
+  FORCE_INLINE void _draw_hotend_status(const heater_id_t heater_id, const bool blink) {
+    #if !HEATER_IDLE_HANDLER
+      UNUSED(blink);
+    #endif
+
+    const bool isHeat = HOTEND_ALT(heater_id);
+
+    const uint8_t tx = STATUS_HOTEND_TEXT_X(heater_id);
+
+    const float temp = thermalManager.degHotend(heater_id),
+              target = thermalManager.degTargetHotend(heater_id);
+
+    #if DISABLED(STATUS_HOTEND_ANIM)
+      #define STATIC_HOTEND true
+      #define HOTEND_DOT    isHeat
+    #else
+      #define STATIC_HOTEND false
+      #define HOTEND_DOT    false
+    #endif
+
+    #if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS)
+      #define OFF_BMP(N) status_hotend_b_bmp
+      #define ON_BMP(N)  status_hotend_a_bmp
+    #elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS)
+      #define OFF_BMP(N) status_hotend_a_bmp
+      #define ON_BMP(N)  status_hotend_b_bmp
+    #elif BOTH(ANIM_HOTEND, STATUS_HOTEND_INVERTED)
+      #define OFF_BMP(N) status_hotend##N##_b_bmp
+      #define ON_BMP(N)  status_hotend##N##_a_bmp
+    #else
+      #define OFF_BMP(N) status_hotend##N##_a_bmp
+      #define ON_BMP(N)  status_hotend##N##_b_bmp
+    #endif
+
+    #if STATUS_HOTEND_BITMAPS > 1
+      static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6));
+      #if ANIM_HOTEND
+        static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6));
+        #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
+      #else
+        #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
+      #endif
+    #elif ANIM_HOTEND
+      #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP())
+    #else
+      #define HOTEND_BITMAP(N,S) status_hotend_a_bmp
+    #endif
+
+    if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
+
+      #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
+
+      const float prop = target - 20,
+                  perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
+      uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
+      NOMORE(tall, BAR_TALL);
+
+      #if ANIM_HOTEND
+        // Draw hotend bitmap, either whole or split by the heating percent
+        const uint8_t hx = STATUS_HOTEND_X(heater_id),
+                      bw = STATUS_HOTEND_BYTEWIDTH(heater_id);
+        #if ENABLED(STATUS_HEAT_PERCENT)
+          if (isHeat && tall <= BAR_TALL) {
+            const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
+            u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(heater_id, false));
+            u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(heater_id, true) + ph * bw);
+          }
+          else
+        #endif
+            u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater_id, isHeat));
+      #endif
+
+    } // PAGE_CONTAINS
+
+    if (PAGE_UNDER(7)) {
+      #if HEATER_IDLE_HANDLER
+        const bool dodraw = (blink || !thermalManager.heater_idle[heater_id].timed_out);
+      #else
+        constexpr bool dodraw = true;
+      #endif
+      if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
+    }
+
+    if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
+      _draw_centered_temp(temp + 0.5f, tx, 28);
+
+    if (STATIC_HOTEND && HOTEND_DOT && PAGE_CONTAINS(17, 19)) {
+      u8g.setColorIndex(0); // set to white on black
+      u8g.drawBox(tx, 20 - 3, 2, 2);
+      u8g.setColorIndex(1); // restore black on white
+    }
+
+  }
+
+#endif // DO_DRAW_HOTENDS
+
+#if DO_DRAW_BED
+
+  // Draw bed bitmap with current and target temperatures
+  FORCE_INLINE void _draw_bed_status(const bool blink) {
+    #if !HEATER_IDLE_HANDLER
+      UNUSED(blink);
+    #endif
+
+    const uint8_t tx = STATUS_BED_TEXT_X;
+
+    const float temp = thermalManager.degBed(),
+              target = thermalManager.degTargetBed();
+
+    #if ENABLED(STATUS_HEAT_PERCENT) || DISABLED(STATUS_BED_ANIM)
+      const bool isHeat = BED_ALT();
+    #endif
+
+    #if DISABLED(STATUS_BED_ANIM)
+      #define STATIC_BED    true
+      #define BED_DOT       isHeat
+    #else
+      #define STATIC_BED    false
+      #define BED_DOT       false
+    #endif
+
+    if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
+
+      #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
+
+      const float prop = target - 20,
+                  perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
+      uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
+      NOMORE(tall, BAR_TALL);
+
+      // Draw a heating progress bar, if specified
+      #if ENABLED(STATUS_HEAT_PERCENT)
+
+        if (isHeat) {
+          const uint8_t bx = STATUS_BED_X + STATUS_BED_WIDTH;
+          u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT);
+          if (tall) {
+            const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
+            if (PAGE_OVER(STATUS_HEATERS_Y + ph))
+              u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall);
+          }
+        }
+
+      #endif
+
+    } // PAGE_CONTAINS
+
+    if (PAGE_UNDER(7)) {
+      #if HEATER_IDLE_HANDLER
+        const bool dodraw = (blink || !thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out);
+      #else
+        constexpr bool dodraw = true;
+      #endif
+      if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
+    }
+
+    if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
+      _draw_centered_temp(temp + 0.5f, tx, 28);
+
+    if (STATIC_BED && BED_DOT && PAGE_CONTAINS(17, 19)) {
+      u8g.setColorIndex(0); // set to white on black
+      u8g.drawBox(tx, 20 - 2, 2, 2);
+      u8g.setColorIndex(1); // restore black on white
+    }
+
+  }
+
+#endif // DO_DRAW_BED
+
+#if DO_DRAW_CHAMBER
+
+  FORCE_INLINE void _draw_chamber_status() {
+    #if HAS_HEATED_CHAMBER
+      if (PAGE_UNDER(7))
+        _draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7);
+    #endif
+
+    if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
+      _draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28);
+  }
+
+#endif // DO_DRAW_CHAMBER
+
+//
+// Before homing, blink '123' <-> '???'.
+// Homed but unknown... '123' <-> '   '.
+// Homed and known, display constantly.
+//
+FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) {
+  const bool is_inch = parser.using_inch_units();
+  const AxisEnum a = TERN(LCD_SHOW_E_TOTAL, axis == E_AXIS ? X_AXIS : axis, axis);
+  const uint8_t offs = a * (is_inch ? XYZ_SPACING_IN : XYZ_SPACING);
+  lcd_put_wchar((is_inch ? X_LABEL_POS_IN : X_LABEL_POS) + offs, XYZ_BASELINE, axis_codes[axis]);
+  lcd_moveto((is_inch ? X_VALUE_POS_IN : X_VALUE_POS) + offs, XYZ_BASELINE);
+
+  if (blink)
+    lcd_put_u8str(value);
+  else if (axis_should_home(axis))
+    while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
+  else if (NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !axis_is_trusted(axis))
+    lcd_put_u8str_P(axis == Z_AXIS ? PSTR("       ") : PSTR("    "));
+  else
+    lcd_put_u8str(value);
+}
+
+/**
+ * Draw the Status Screen for a 128x64 DOGM (U8glib) display.
+ *
+ * Called as needed to update the current display stripe.
+ * Use the PAGE_CONTAINS macros to avoid pointless draw calls.
+ */
+void MarlinUI::draw_status_screen() {
+  constexpr int xystorage = TERN(INCH_MODE_SUPPORT, 8, 5);
+  static char xstring[TERN(LCD_SHOW_E_TOTAL, 12, xystorage)], ystring[xystorage], zstring[8];
+
+  #if ENABLED(FILAMENT_LCD_DISPLAY)
+    static char wstring[5], mstring[4];
+  #endif
+
+  #if HAS_PRINT_PROGRESS
+    #if DISABLED(DOGM_SD_PERCENT)
+      #define _SD_INFO_X(len) (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH) / 2 - (len) * (MENU_FONT_WIDTH) / 2)
+    #else
+      #define _SD_INFO_X(len) (LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH))
+    #endif
+
+    #if ENABLED(DOGM_SD_PERCENT)
+      static char progress_string[5];
+    #endif
+    static uint8_t lastElapsed = 0xFF, lastProgress = 0xFF;
+    static u8g_uint_t elapsed_x_pos = 0, progress_bar_solid_width = 0;
+    static char elapsed_string[16];
+    #if ENABLED(SHOW_REMAINING_TIME)
+      static u8g_uint_t estimation_x_pos = 0;
+      static char estimation_string[10];
+      #if BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
+        static u8g_uint_t progress_x_pos = 0;
+        static uint8_t progress_state = 0;
+        static bool prev_blink = 0;
+      #endif
+    #endif
+  #endif
+
+  const bool show_e_total = TERN0(LCD_SHOW_E_TOTAL, printingIsActive() || marlin_state == MF_SD_COMPLETE);
+
+  // At the first page, generate new display values
+  if (first_page) {
+    #if ANIM_HBCC
+      uint8_t new_bits = 0;
+      #if ANIM_HOTEND
+        HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, HEATBIT_HOTEND + e);
+      #endif
+      if (TERN0(ANIM_BED, thermalManager.isHeatingBed())) SBI(new_bits, HEATBIT_BED);
+      #if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER
+        if (thermalManager.isHeatingChamber()) SBI(new_bits, HEATBIT_CHAMBER);
+      #endif
+      if (TERN0(ANIM_CUTTER, cutter.enabled())) SBI(new_bits, HEATBIT_CUTTER);
+      heat_bits = new_bits;
+    #endif
+
+    const xyz_pos_t lpos = current_position.asLogical();
+    const bool is_inch = parser.using_inch_units();
+    strcpy(zstring, is_inch ? ftostr42_52(LINEAR_UNIT(lpos.z)) : ftostr52sp(lpos.z));
+
+    if (show_e_total) {
+      #if ENABLED(LCD_SHOW_E_TOTAL)
+        const uint8_t escale = e_move_accumulator >= 100000.0f ? 10 : 1; // After 100m switch to cm
+        sprintf_P(xstring, PSTR("%ld%cm"), uint32_t(_MAX(e_move_accumulator, 0.0f)) / escale, escale == 10 ? 'c' : 'm'); // 1234567mm
+      #endif
+    }
+    else {
+      strcpy(xstring, is_inch ? ftostr53_63(LINEAR_UNIT(lpos.x)) : ftostr4sign(lpos.x));
+      strcpy(ystring, is_inch ? ftostr53_63(LINEAR_UNIT(lpos.y)) : ftostr4sign(lpos.y));
+    }
+
+    #if ENABLED(FILAMENT_LCD_DISPLAY)
+      strcpy(wstring, ftostr12ns(filwidth.measured_mm));
+      strcpy(mstring, i16tostr3rj(planner.volumetric_percent(parser.volumetric_enabled)));
+    #endif
+
+    // Progress / elapsed / estimation updates and string formatting to avoid float math on each LCD draw
+    #if HAS_PRINT_PROGRESS
+      const progress_t progress = TERN(HAS_PRINT_PROGRESS_PERMYRIAD, get_progress_permyriad, get_progress_percent)();
+      duration_t elapsed = print_job_timer.duration();
+      const uint8_t p = progress & 0xFF, ev = elapsed.value & 0xFF;
+      if (p != lastProgress) {
+        lastProgress = p;
+
+        progress_bar_solid_width = u8g_uint_t((PROGRESS_BAR_WIDTH - 2) * (progress / (PROGRESS_SCALE)) * 0.01f);
+
+        #if ENABLED(DOGM_SD_PERCENT)
+          if (progress == 0) {
+            progress_string[0] = '\0';
+            #if ENABLED(SHOW_REMAINING_TIME)
+              estimation_string[0] = '\0';
+              estimation_x_pos = _SD_INFO_X(0);
+            #endif
+          }
+          else
+            strcpy(progress_string, TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(progress), ui8tostr3rj(progress / (PROGRESS_SCALE))));
+
+          #if BOTH(SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY) // Tri-state progress display mode
+            progress_x_pos = _SD_INFO_X(strlen(progress_string) + 1);
+          #endif
+        #endif
+      }
+
+      constexpr bool can_show_days = DISABLED(DOGM_SD_PERCENT) || ENABLED(ROTATE_PROGRESS_DISPLAY);
+      if (ev != lastElapsed) {
+        lastElapsed = ev;
+        const uint8_t len = elapsed.toDigital(elapsed_string, can_show_days && elapsed.value >= 60*60*24L);
+        elapsed_x_pos = _SD_INFO_X(len);
+
+        #if ENABLED(SHOW_REMAINING_TIME)
+          if (!(ev & 0x3)) {
+            uint32_t timeval = (0
+              #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
+                + get_remaining_time()
+              #endif
+            );
+            if (!timeval && progress > 0) timeval = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress;
+            if (!timeval) {
+              estimation_string[0] = '\0';
+              estimation_x_pos = _SD_INFO_X(0);
+            }
+            else {
+              duration_t estimation = timeval;
+              const uint8_t len = estimation.toDigital(estimation_string, can_show_days && estimation.value >= 60*60*24L);
+              estimation_x_pos = _SD_INFO_X(len
+                #if !BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
+                  + 1
+                #endif
+              );
+            }
+          }
+        #endif
+      }
+    #endif
+  }
+
+  const bool blink = get_blink();
+
+  // Status Menu Font
+  set_font(FONT_STATUSMENU);
+
+  #if DO_DRAW_LOGO
+    if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1))
+      u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp);
+  #endif
+
+  #if STATUS_HEATERS_WIDTH
+    // Draw all heaters (and maybe the bed) in one go
+    if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1))
+      u8g.drawBitmapP(STATUS_HEATERS_X, STATUS_HEATERS_Y, STATUS_HEATERS_BYTEWIDTH, STATUS_HEATERS_HEIGHT, status_heaters_bmp);
+  #endif
+
+  #if DO_DRAW_CUTTER && DISABLED(STATUS_COMBINE_HEATERS)
+    #if ANIM_CUTTER
+      #define CUTTER_BITMAP(S) ((S) ? status_cutter_on_bmp : status_cutter_bmp)
+    #else
+      #define CUTTER_BITMAP(S) status_cutter_bmp
+    #endif
+    const uint8_t cuttery = STATUS_CUTTER_Y(CUTTER_ALT()),
+                  cutterh = STATUS_CUTTER_HEIGHT(CUTTER_ALT());
+    if (PAGE_CONTAINS(cuttery, cuttery + cutterh - 1))
+      u8g.drawBitmapP(STATUS_CUTTER_X, cuttery, STATUS_CUTTER_BYTEWIDTH, cutterh, CUTTER_BITMAP(CUTTER_ALT()));
+  #endif
+
+  #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS)
+    #if ANIM_BED
+      #define BED_BITMAP(S) ((S) ? status_bed_on_bmp : status_bed_bmp)
+    #else
+      #define BED_BITMAP(S) status_bed_bmp
+    #endif
+    const uint8_t bedy = STATUS_BED_Y(BED_ALT()),
+                  bedh = STATUS_BED_HEIGHT(BED_ALT());
+    if (PAGE_CONTAINS(bedy, bedy + bedh - 1))
+      u8g.drawBitmapP(STATUS_BED_X, bedy, STATUS_BED_BYTEWIDTH, bedh, BED_BITMAP(BED_ALT()));
+  #endif
+
+  #if DO_DRAW_CHAMBER && DISABLED(STATUS_COMBINE_HEATERS)
+    #if ANIM_CHAMBER
+      #define CHAMBER_BITMAP(S) ((S) ? status_chamber_on_bmp : status_chamber_bmp)
+    #else
+      #define CHAMBER_BITMAP(S) status_chamber_bmp
+    #endif
+    const uint8_t chambery = STATUS_CHAMBER_Y(CHAMBER_ALT()),
+                  chamberh = STATUS_CHAMBER_HEIGHT(CHAMBER_ALT());
+    if (PAGE_CONTAINS(chambery, chambery + chamberh - 1))
+      u8g.drawBitmapP(STATUS_CHAMBER_X, chambery, STATUS_CHAMBER_BYTEWIDTH, chamberh, CHAMBER_BITMAP(CHAMBER_ALT()));
+  #endif
+
+  #if DO_DRAW_FAN
+    #if STATUS_FAN_FRAMES > 2
+      static bool old_blink;
+      static uint8_t fan_frame;
+      if (old_blink != blink) {
+        old_blink = blink;
+        if (!thermalManager.fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0;
+      }
+    #endif
+    if (PAGE_CONTAINS(STATUS_FAN_Y, STATUS_FAN_Y + STATUS_FAN_HEIGHT - 1))
+      u8g.drawBitmapP(STATUS_FAN_X, STATUS_FAN_Y, STATUS_FAN_BYTEWIDTH, STATUS_FAN_HEIGHT,
+        #if STATUS_FAN_FRAMES > 2
+          fan_frame == 1 ? status_fan1_bmp :
+          fan_frame == 2 ? status_fan2_bmp :
+          #if STATUS_FAN_FRAMES > 3
+            fan_frame == 3 ? status_fan3_bmp :
+          #endif
+        #elif STATUS_FAN_FRAMES > 1
+          blink && thermalManager.fan_speed[0] ? status_fan1_bmp :
+        #endif
+        status_fan0_bmp
+      );
+  #endif
+
+  //
+  // Temperature Graphics and Info
+  //
+  if (PAGE_UNDER(6 + 1 + 12 + 1 + 6 + 1)) {
+    // Extruders
+    #if DO_DRAW_HOTENDS
+      LOOP_L_N(e, MAX_HOTEND_DRAW)
+        _draw_hotend_status((heater_id_t)e, blink);
+    #endif
+
+    // Laser / Spindle
+    #if DO_DRAW_CUTTER
+      if (cutter.isReady && PAGE_CONTAINS(STATUS_CUTTER_TEXT_Y - INFO_FONT_ASCENT, STATUS_CUTTER_TEXT_Y - 1)) {
+        #if CUTTER_UNIT_IS(PERCENT)
+          lcd_put_u8str(STATUS_CUTTER_TEXT_X, STATUS_CUTTER_TEXT_Y, cutter_power2str(cutter.unitPower));
+        #elif CUTTER_UNIT_IS(RPM)
+          lcd_put_u8str(STATUS_CUTTER_TEXT_X - 2, STATUS_CUTTER_TEXT_Y, ftostr51rj(float(cutter.unitPower) / 1000));
+          lcd_put_wchar('K');
+        #else
+          lcd_put_u8str(STATUS_CUTTER_TEXT_X, STATUS_CUTTER_TEXT_Y, cutter_power2str(cutter.unitPower));
+        #endif
+      }
+    #endif
+
+    // Heated Bed
+    TERN_(DO_DRAW_BED, _draw_bed_status(blink));
+
+    // Heated Chamber
+    TERN_(DO_DRAW_CHAMBER, _draw_chamber_status());
+
+    // Fan, if a bitmap was provided
+    #if DO_DRAW_FAN
+      if (PAGE_CONTAINS(STATUS_FAN_TEXT_Y - INFO_FONT_ASCENT, STATUS_FAN_TEXT_Y - 1)) {
+        char c = '%';
+        uint16_t spd = thermalManager.fan_speed[0];
+        if (spd) {
+          #if ENABLED(ADAPTIVE_FAN_SLOWING)
+            if (!blink && thermalManager.fan_speed_scaler[0] < 128) {
+              spd = thermalManager.scaledFanSpeed(0, spd);
+              c = '*';
+            }
+          #endif
+          lcd_put_u8str(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y, i16tostr3rj(thermalManager.fanPercent(spd)));
+          lcd_put_wchar(c);
+        }
+      }
+    #endif
+  }
+
+  #if ENABLED(SDSUPPORT)
+    //
+    // SD Card Symbol
+    //
+    if (card.isFileOpen() && PAGE_CONTAINS(42, 51)) {
+      // Upper box
+      u8g.drawBox(42, 42, 8, 7);     // 42-48 (or 41-47)
+      // Right edge
+      u8g.drawBox(50, 44, 2, 5);     // 44-48 (or 43-47)
+      // Bottom hollow box
+      u8g.drawFrame(42, 49, 10, 4);  // 49-52 (or 48-51)
+      // Corner pixel
+      u8g.drawPixel(50, 43);         // 43 (or 42)
+    }
+  #endif // SDSUPPORT
+
+  #if HAS_PRINT_PROGRESS
+    //
+    // Progress bar frame
+    //
+
+    if (PAGE_CONTAINS(PROGRESS_BAR_Y, PROGRESS_BAR_Y + 3))
+      u8g.drawFrame(PROGRESS_BAR_X, PROGRESS_BAR_Y, PROGRESS_BAR_WIDTH, 4);
+
+    //
+    // Progress bar solid part
+    //
+
+    if (PAGE_CONTAINS(PROGRESS_BAR_Y + 1, PROGRESS_BAR_Y + 2))
+      u8g.drawBox(PROGRESS_BAR_X + 1, PROGRESS_BAR_Y + 1, progress_bar_solid_width, 2);
+
+    if (PAGE_CONTAINS(EXTRAS_BASELINE - INFO_FONT_ASCENT, EXTRAS_BASELINE - 1)) {
+
+      #if ALL(DOGM_SD_PERCENT, SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY)
+
+        if (prev_blink != blink) {
+          prev_blink = blink;
+          if (++progress_state >= 3) progress_state = 0;
+        }
+
+        if (progress_state == 0) {
+          if (progress_string[0]) {
+            lcd_put_u8str(progress_x_pos, EXTRAS_BASELINE, progress_string);
+            lcd_put_wchar('%');
+          }
+        }
+        else if (progress_state == 2 && estimation_string[0]) {
+          lcd_put_u8str_P(PROGRESS_BAR_X, EXTRAS_BASELINE, PSTR("R:"));
+          lcd_put_u8str(estimation_x_pos, EXTRAS_BASELINE, estimation_string);
+        }
+        else if (elapsed_string[0]) {
+          lcd_put_u8str_P(PROGRESS_BAR_X, EXTRAS_BASELINE, E_LBL);
+          lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
+        }
+
+      #else // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
+
+        //
+        // SD Percent Complete
+        //
+
+        #if ENABLED(DOGM_SD_PERCENT)
+          if (progress_string[0]) {
+            lcd_put_u8str(55, EXTRAS_BASELINE, progress_string); // Percent complete
+            lcd_put_wchar('%');
+          }
+        #endif
+
+        //
+        // Elapsed Time
+        //
+
+        #if ENABLED(SHOW_REMAINING_TIME)
+          if (blink && estimation_string[0]) {
+            lcd_put_wchar(estimation_x_pos, EXTRAS_BASELINE, 'R');
+            lcd_put_u8str(estimation_string);
+          }
+          else
+        #endif
+            lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
+
+      #endif // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
+    }
+
+  #endif // HAS_PRINT_PROGRESS
+
+  //
+  // XYZ Coordinates
+  //
+
+  #if EITHER(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME)
+    #define XYZ_FRAME_TOP 29
+    #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 3
+  #else
+    #define XYZ_FRAME_TOP 30
+    #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 1
+  #endif
+
+  if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) {
+
+    #if DISABLED(XYZ_NO_FRAME)
+      #if ENABLED(XYZ_HOLLOW_FRAME)
+        u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40  7: 29-39
+      #else
+        u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT);   // 8: 30-39  7: 30-37
+      #endif
+    #endif
+
+    if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_ASCENT - 1), XYZ_BASELINE)) {
+
+      #if NONE(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME)
+        u8g.setColorIndex(0); // white on black
+      #endif
+
+      #if HAS_DUAL_MIXING
+
+        // Two-component mix / gradient instead of XY
+
+        char mixer_messages[15];
+        PGM_P mix_label;
+        #if ENABLED(GRADIENT_MIX)
+          if (mixer.gradient.enabled) {
+            mixer.update_mix_from_gradient();
+            mix_label = PSTR("Gr");
+          }
+          else
+        #endif
+          {
+            mixer.update_mix_from_vtool();
+            mix_label = PSTR("Mx");
+          }
+
+        #pragma GCC diagnostic push
+        #pragma GCC diagnostic ignored "-Wformat-overflow"
+
+        sprintf_P(mixer_messages, PSTR(S_FMT " %d;%d%% "), mix_label, int(mixer.mix[0]), int(mixer.mix[1]));
+        lcd_put_u8str(X_LABEL_POS, XYZ_BASELINE, mixer_messages);
+
+        #pragma GCC diagnostic pop
+
+      #else
+
+        if (show_e_total) {
+          _draw_axis_value(E_AXIS, xstring, true);
+          lcd_put_u8str_P(PSTR("       "));
+        }
+        else {
+          _draw_axis_value(X_AXIS, xstring, blink);
+          _draw_axis_value(Y_AXIS, ystring, blink);
+        }
+
+      #endif
+
+      _draw_axis_value(Z_AXIS, zstring, blink);
+
+      #if NONE(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME)
+        u8g.setColorIndex(1); // black on white
+      #endif
+    }
+  }
+
+  //
+  // Feedrate
+  //
+  #define EXTRAS_2_BASELINE (EXTRAS_BASELINE + 3)
+
+  if (PAGE_CONTAINS(EXTRAS_2_BASELINE - INFO_FONT_ASCENT, EXTRAS_2_BASELINE - 1)) {
+    set_font(FONT_MENU);
+    lcd_put_wchar(3, EXTRAS_2_BASELINE, LCD_STR_FEEDRATE[0]);
+
+    set_font(FONT_STATUSMENU);
+    lcd_put_u8str(12, EXTRAS_2_BASELINE, i16tostr3rj(feedrate_percentage));
+    lcd_put_wchar('%');
+
+    //
+    // Filament sensor display if SD is disabled
+    //
+    #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT)
+      lcd_put_u8str(56, EXTRAS_2_BASELINE, wstring);
+      lcd_put_u8str(102, EXTRAS_2_BASELINE, mstring);
+      lcd_put_wchar('%');
+      set_font(FONT_MENU);
+      lcd_put_wchar(47, EXTRAS_2_BASELINE, LCD_STR_FILAM_DIA[0]); // lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));
+      lcd_put_wchar(93, EXTRAS_2_BASELINE, LCD_STR_FILAM_MUL[0]);
+    #endif
+  }
+
+  //
+  // Status line
+  //
+  if (PAGE_CONTAINS(STATUS_BASELINE - INFO_FONT_ASCENT, STATUS_BASELINE + INFO_FONT_DESCENT)) {
+    lcd_moveto(0, STATUS_BASELINE);
+
+    #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
+      // Alternate Status message and Filament display
+      if (ELAPSED(millis(), next_filament_display)) {
+        lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));
+        lcd_put_wchar(':');
+        lcd_put_u8str(wstring);
+        lcd_put_u8str_P(PSTR("  " LCD_STR_FILAM_MUL));
+        lcd_put_wchar(':');
+        lcd_put_u8str(mstring);
+        lcd_put_wchar('%');
+        return;
+      }
+    #endif
+
+    draw_status_message(blink);
+  }
+}
+
+/**
+ * Draw the Status Message area
+ */
+void MarlinUI::draw_status_message(const bool blink) {
+
+  // Get the UTF8 character count of the string
+  uint8_t lcd_width = LCD_WIDTH, pixel_width = LCD_PIXEL_WIDTH,
+          slen = utf8_strlen(status_message);
+
+  #if HAS_POWER_MONITOR
+    if (power_monitor.display_enabled()) {
+      // make room at the end of the status line for the power monitor reading
+      lcd_width -= 6;
+      pixel_width -= (MENU_FONT_WIDTH) * 6;
+    }
+  #endif
+
+  #if ENABLED(STATUS_MESSAGE_SCROLLING)
+
+    static bool last_blink = false;
+
+    if (slen <= lcd_width) {
+      // The string fits within the line. Print with no scrolling
+      lcd_put_u8str(status_message);
+      while (slen < lcd_width) { lcd_put_wchar(' '); ++slen; }
+    }
+    else {
+      // String is longer than the available space
+      if (blink != last_blink) {
+        last_blink = blink;
+        advance_status_scroll();
+      }
+
+      // Get a pointer to the next valid UTF8 character
+      // and the string remaining length
+      uint8_t rlen;
+      const char *stat = status_and_len(rlen);
+      lcd_put_u8str_max(stat, pixel_width);
+
+      // If the remaining string doesn't completely fill the screen
+      if (rlen < lcd_width) {
+        lcd_put_wchar('.');                     // Always at 1+ spaces left, draw a dot
+        uint8_t chars = lcd_width - rlen;       // Amount of space left in characters
+        if (--chars) {                          // Draw a second dot if there's space
+          lcd_put_wchar('.');
+          if (--chars) {                        // Print a second copy of the message
+            lcd_put_u8str_max(status_message, pixel_width - (rlen + 2) * (MENU_FONT_WIDTH));
+            lcd_put_wchar(' ');
+          }
+        }
+      }
+    }
+
+  #else // !STATUS_MESSAGE_SCROLLING
+
+    UNUSED(blink);
+
+    // Just print the string to the LCD
+    lcd_put_u8str_max(status_message, pixel_width);
+
+    // Fill the rest with spaces
+    for (; slen < lcd_width; ++slen) lcd_put_wchar(' ');
+
+  #endif // !STATUS_MESSAGE_SCROLLING
+
+  #if HAS_POWER_MONITOR
+    display_power_monitor(pixel_width + MENU_FONT_WIDTH, STATUS_BASELINE);
+  #endif
+}
+
+#endif // HAS_MARLINUI_U8GLIB && !LIGHTWEIGHT_UI