Initial commit

48 files changed, 3628 insertions, 0 deletions

diff --git a/Marlin/src/module/thermistor/thermistor_1.h b/Marlin/src/module/thermistor/thermistor_1.h
new file mode 100644
index 0000000..fad7908
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_1.h
@@ -0,0 +1,90 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
+const temp_entry_t temptable_1[] PROGMEM = {
+  { OV(  23), 300 },
+  { OV(  25), 295 },
+  { OV(  27), 290 },
+  { OV(  28), 285 },
+  { OV(  31), 280 },
+  { OV(  33), 275 },
+  { OV(  35), 270 },
+  { OV(  38), 265 },
+  { OV(  41), 260 },
+  { OV(  44), 255 },
+  { OV(  48), 250 },
+  { OV(  52), 245 },
+  { OV(  56), 240 },
+  { OV(  61), 235 },
+  { OV(  66), 230 },
+  { OV(  71), 225 },
+  { OV(  78), 220 },
+  { OV(  84), 215 },
+  { OV(  92), 210 },
+  { OV( 100), 205 },
+  { OV( 109), 200 },
+  { OV( 120), 195 },
+  { OV( 131), 190 },
+  { OV( 143), 185 },
+  { OV( 156), 180 },
+  { OV( 171), 175 },
+  { OV( 187), 170 },
+  { OV( 205), 165 },
+  { OV( 224), 160 },
+  { OV( 245), 155 },
+  { OV( 268), 150 },
+  { OV( 293), 145 },
+  { OV( 320), 140 },
+  { OV( 348), 135 },
+  { OV( 379), 130 },
+  { OV( 411), 125 },
+  { OV( 445), 120 },
+  { OV( 480), 115 },
+  { OV( 516), 110 },
+  { OV( 553), 105 },
+  { OV( 591), 100 },
+  { OV( 628),  95 },
+  { OV( 665),  90 },
+  { OV( 702),  85 },
+  { OV( 737),  80 },
+  { OV( 770),  75 },
+  { OV( 801),  70 },
+  { OV( 830),  65 },
+  { OV( 857),  60 },
+  { OV( 881),  55 },
+  { OV( 903),  50 },
+  { OV( 922),  45 },
+  { OV( 939),  40 },
+  { OV( 954),  35 },
+  { OV( 966),  30 },
+  { OV( 977),  25 },
+  { OV( 985),  20 },
+  { OV( 993),  15 },
+  { OV( 999),  10 },
+  { OV(1004),   5 },
+  { OV(1008),   0 },
+  { OV(1012),  -5 },
+  { OV(1016), -10 },
+  { OV(1020), -15 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_10.h b/Marlin/src/module/thermistor/thermistor_10.h
new file mode 100644
index 0000000..c24ad40
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_10.h
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, RS thermistor 198-961
+const temp_entry_t temptable_10[] PROGMEM = {
+  { OV(   1), 929 },
+  { OV(  36), 299 },
+  { OV(  71), 246 },
+  { OV( 106), 217 },
+  { OV( 141), 198 },
+  { OV( 176), 184 },
+  { OV( 211), 173 },
+  { OV( 246), 163 },
+  { OV( 281), 154 },
+  { OV( 316), 147 },
+  { OV( 351), 140 },
+  { OV( 386), 134 },
+  { OV( 421), 128 },
+  { OV( 456), 122 },
+  { OV( 491), 117 },
+  { OV( 526), 112 },
+  { OV( 561), 107 },
+  { OV( 596), 102 },
+  { OV( 631),  97 },
+  { OV( 666),  91 },
+  { OV( 701),  86 },
+  { OV( 736),  81 },
+  { OV( 771),  76 },
+  { OV( 806),  70 },
+  { OV( 841),  63 },
+  { OV( 876),  56 },
+  { OV( 911),  48 },
+  { OV( 946),  38 },
+  { OV( 981),  23 },
+  { OV(1005),   5 },
+  { OV(1016),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_1010.h b/Marlin/src/module/thermistor/thermistor_1010.h
new file mode 100644
index 0000000..8ab5e3b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_1010.h
@@ -0,0 +1,41 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_1010 1
+
+// Pt1000 with 1k0 pullup
+const temp_entry_t temptable_1010[] PROGMEM = {
+  PtLine(  0, 1000, 1000),
+  PtLine( 25, 1000, 1000),
+  PtLine( 50, 1000, 1000),
+  PtLine( 75, 1000, 1000),
+  PtLine(100, 1000, 1000),
+  PtLine(125, 1000, 1000),
+  PtLine(150, 1000, 1000),
+  PtLine(175, 1000, 1000),
+  PtLine(200, 1000, 1000),
+  PtLine(225, 1000, 1000),
+  PtLine(250, 1000, 1000),
+  PtLine(275, 1000, 1000),
+  PtLine(300, 1000, 1000)
+};
diff --git a/Marlin/src/module/thermistor/thermistor_1047.h b/Marlin/src/module/thermistor/thermistor_1047.h
new file mode 100644
index 0000000..6e1b61f
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_1047.h
@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_1047 1
+
+// Pt1000 with 4k7 pullup
+const temp_entry_t temptable_1047[] PROGMEM = {
+  // only a few values are needed as the curve is very flat
+  PtLine(  0, 1000, 4700),
+  PtLine( 50, 1000, 4700),
+  PtLine(100, 1000, 4700),
+  PtLine(150, 1000, 4700),
+  PtLine(200, 1000, 4700),
+  PtLine(250, 1000, 4700),
+  PtLine(300, 1000, 4700),
+  PtLine(350, 1000, 4700),
+  PtLine(400, 1000, 4700),
+  PtLine(450, 1000, 4700),
+  PtLine(500, 1000, 4700)
+};
diff --git a/Marlin/src/module/thermistor/thermistor_11.h b/Marlin/src/module/thermistor/thermistor_11.h
new file mode 100644
index 0000000..345d009
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_11.h
@@ -0,0 +1,76 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, QU-BD silicone bed QWG-104F-3950 thermistor
+const temp_entry_t temptable_11[] PROGMEM = {
+  { OV(   1), 938 },
+  { OV(  31), 314 },
+  { OV(  41), 290 },
+  { OV(  51), 272 },
+  { OV(  61), 258 },
+  { OV(  71), 247 },
+  { OV(  81), 237 },
+  { OV(  91), 229 },
+  { OV( 101), 221 },
+  { OV( 111), 215 },
+  { OV( 121), 209 },
+  { OV( 131), 204 },
+  { OV( 141), 199 },
+  { OV( 151), 195 },
+  { OV( 161), 190 },
+  { OV( 171), 187 },
+  { OV( 181), 183 },
+  { OV( 191), 179 },
+  { OV( 201), 176 },
+  { OV( 221), 170 },
+  { OV( 241), 165 },
+  { OV( 261), 160 },
+  { OV( 281), 155 },
+  { OV( 301), 150 },
+  { OV( 331), 144 },
+  { OV( 361), 139 },
+  { OV( 391), 133 },
+  { OV( 421), 128 },
+  { OV( 451), 123 },
+  { OV( 491), 117 },
+  { OV( 531), 111 },
+  { OV( 571), 105 },
+  { OV( 611), 100 },
+  { OV( 641),  95 },
+  { OV( 681),  90 },
+  { OV( 711),  85 },
+  { OV( 751),  79 },
+  { OV( 791),  72 },
+  { OV( 811),  69 },
+  { OV( 831),  65 },
+  { OV( 871),  57 },
+  { OV( 881),  55 },
+  { OV( 901),  51 },
+  { OV( 921),  45 },
+  { OV( 941),  39 },
+  { OV( 971),  28 },
+  { OV( 981),  23 },
+  { OV( 991),  17 },
+  { OV(1001),   9 },
+  { OV(1021), -27 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_110.h b/Marlin/src/module/thermistor/thermistor_110.h
new file mode 100644
index 0000000..215495e
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_110.h
@@ -0,0 +1,36 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_110 1
+
+// Pt100 with 1k0 pullup
+const temp_entry_t temptable_110[] PROGMEM = {
+  // only a few values are needed as the curve is very flat
+  PtLine(  0, 100, 1000),
+  PtLine( 50, 100, 1000),
+  PtLine(100, 100, 1000),
+  PtLine(150, 100, 1000),
+  PtLine(200, 100, 1000),
+  PtLine(250, 100, 1000),
+  PtLine(300, 100, 1000)
+};
diff --git a/Marlin/src/module/thermistor/thermistor_12.h b/Marlin/src/module/thermistor/thermistor_12.h
new file mode 100644
index 0000000..d1ee23b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_12.h
@@ -0,0 +1,56 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4700 K, 4.7 kOhm pull-up, (personal calibration for Makibox hot bed)
+const temp_entry_t temptable_12[] PROGMEM = {
+  { OV(  35), 180 }, // top rating 180C
+  { OV( 211), 140 },
+  { OV( 233), 135 },
+  { OV( 261), 130 },
+  { OV( 290), 125 },
+  { OV( 328), 120 },
+  { OV( 362), 115 },
+  { OV( 406), 110 },
+  { OV( 446), 105 },
+  { OV( 496), 100 },
+  { OV( 539),  95 },
+  { OV( 585),  90 },
+  { OV( 629),  85 },
+  { OV( 675),  80 },
+  { OV( 718),  75 },
+  { OV( 758),  70 },
+  { OV( 793),  65 },
+  { OV( 822),  60 },
+  { OV( 841),  55 },
+  { OV( 875),  50 },
+  { OV( 899),  45 },
+  { OV( 926),  40 },
+  { OV( 946),  35 },
+  { OV( 962),  30 },
+  { OV( 977),  25 },
+  { OV( 987),  20 },
+  { OV( 995),  15 },
+  { OV(1001),  10 },
+  { OV(1010),   0 },
+  { OV(1023), -40 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_13.h b/Marlin/src/module/thermistor/thermistor_13.h
new file mode 100644
index 0000000..bb62224
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_13.h
@@ -0,0 +1,49 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor
+const temp_entry_t temptable_13[] PROGMEM = {
+  { OV( 20.04), 300 },
+  { OV( 23.19), 290 },
+  { OV( 26.71), 280 },
+  { OV( 31.23), 270 },
+  { OV( 36.52), 260 },
+  { OV( 42.75), 250 },
+  { OV( 50.68), 240 },
+  { OV( 60.22), 230 },
+  { OV( 72.03), 220 },
+  { OV( 86.84), 210 },
+  { OV(102.79), 200 },
+  { OV(124.46), 190 },
+  { OV(151.02), 180 },
+  { OV(182.86), 170 },
+  { OV(220.72), 160 },
+  { OV(316.96), 140 },
+  { OV(447.17), 120 },
+  { OV(590.61), 100 },
+  { OV(737.31),  80 },
+  { OV(857.77),  60 },
+  { OV(939.52),  40 },
+  { OV(986.03),  20 },
+  { OV(1008.7),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_147.h b/Marlin/src/module/thermistor/thermistor_147.h
new file mode 100644
index 0000000..6d846ad
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_147.h
@@ -0,0 +1,36 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_147 1
+
+// Pt100 with 4k7 pullup
+const temp_entry_t temptable_147[] PROGMEM = {
+  // only a few values are needed as the curve is very flat
+  PtLine(  0, 100, 4700),
+  PtLine( 50, 100, 4700),
+  PtLine(100, 100, 4700),
+  PtLine(150, 100, 4700),
+  PtLine(200, 100, 4700),
+  PtLine(250, 100, 4700),
+  PtLine(300, 100, 4700)
+};
diff --git a/Marlin/src/module/thermistor/thermistor_15.h b/Marlin/src/module/thermistor/thermistor_15.h
new file mode 100644
index 0000000..46dcce8
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_15.h
@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+ // 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter.
+const temp_entry_t temptable_15[] PROGMEM = {
+  { OV(  31), 275 },
+  { OV(  33), 270 },
+  { OV(  35), 260 },
+  { OV(  38), 253 },
+  { OV(  41), 248 },
+  { OV(  48), 239 },
+  { OV(  56), 232 },
+  { OV(  66), 222 },
+  { OV(  78), 212 },
+  { OV(  93), 206 },
+  { OV( 106), 199 },
+  { OV( 118), 191 },
+  { OV( 130), 186 },
+  { OV( 158), 176 },
+  { OV( 187), 167 },
+  { OV( 224), 158 },
+  { OV( 270), 148 },
+  { OV( 321), 137 },
+  { OV( 379), 127 },
+  { OV( 446), 117 },
+  { OV( 518), 106 },
+  { OV( 593),  96 },
+  { OV( 668),  86 },
+  { OV( 739),  76 },
+  { OV( 767),  72 },
+  { OV( 830),  62 },
+  { OV( 902),  48 },
+  { OV( 926),  45 },
+  { OV( 955),  35 },
+  { OV( 966),  30 },
+  { OV( 977),  25 },
+  { OV( 985),  20 },
+  { OV( 993),  15 },
+  { OV( 999),  10 },
+  { OV(1004),   5 },
+  { OV(1008),   0 },
+  { OV(1012),  -5 },
+  { OV(1016), -10 },
+  { OV(1020), -15 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_17.h b/Marlin/src/module/thermistor/thermistor_17.h
new file mode 100644
index 0000000..32b5bb7
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_17.h
@@ -0,0 +1,78 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Dagoma NTC 100k white thermistor
+const temp_entry_t temptable_17[] PROGMEM = {
+  { OV(  16),  309 },
+  { OV(  18),  307 },
+  { OV(  20),  300 },
+  { OV(  22),  293 },
+  { OV(  26),  284 },
+  { OV(  29),  272 },
+  { OV(  33),  266 },
+  { OV(  36),  260 },
+  { OV(  42),  252 },
+  { OV(  46),  247 },
+  { OV(  48),  244 },
+  { OV(  51),  241 },
+  { OV(  62),  231 },
+  { OV(  73),  222 },
+  { OV(  78),  219 },
+  { OV(  87),  212 },
+  { OV(  98),  207 },
+  { OV( 109),  201 },
+  { OV( 118),  197 },
+  { OV( 131),  191 },
+  { OV( 145),  186 },
+  { OV( 160),  181 },
+  { OV( 177),  175 },
+  { OV( 203),  169 },
+  { OV( 222),  164 },
+  { OV( 256),  156 },
+  { OV( 283),  151 },
+  { OV( 312),  145 },
+  { OV( 343),  140 },
+  { OV( 377),  131 },
+  { OV( 413),  125 },
+  { OV( 454),  119 },
+  { OV( 496),  113 },
+  { OV( 537),  108 },
+  { OV( 578),  102 },
+  { OV( 619),   97 },
+  { OV( 658),   92 },
+  { OV( 695),   87 },
+  { OV( 735),   81 },
+  { OV( 773),   75 },
+  { OV( 808),   70 },
+  { OV( 844),   64 },
+  { OV( 868),   59 },
+  { OV( 892),   54 },
+  { OV( 914),   49 },
+  { OV( 935),   42 },
+  { OV( 951),   38 },
+  { OV( 967),   32 },
+  { OV( 975),   28 },
+  { OV(1000),   20 },
+  { OV(1010),   10 },
+  { OV(1024), -273 } // for safety
+};
diff --git a/Marlin/src/module/thermistor/thermistor_18.h b/Marlin/src/module/thermistor/thermistor_18.h
new file mode 100644
index 0000000..9c2d81b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_18.h
@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - version (measured/tested/approved)
+const temp_entry_t temptable_18[] PROGMEM = {
+  { OV(   1), 713 },
+  { OV(  17), 284 },
+  { OV(  20), 275 },
+  { OV(  23), 267 },
+  { OV(  27), 257 },
+  { OV(  31), 250 },
+  { OV(  37), 240 },
+  { OV(  43), 232 },
+  { OV(  51), 222 },
+  { OV(  61), 213 },
+  { OV(  73), 204 },
+  { OV(  87), 195 },
+  { OV( 106), 185 },
+  { OV( 128), 175 },
+  { OV( 155), 166 },
+  { OV( 189), 156 },
+  { OV( 230), 146 },
+  { OV( 278), 137 },
+  { OV( 336), 127 },
+  { OV( 402), 117 },
+  { OV( 476), 107 },
+  { OV( 554),  97 },
+  { OV( 635),  87 },
+  { OV( 713),  78 },
+  { OV( 784),  68 },
+  { OV( 846),  58 },
+  { OV( 897),  49 },
+  { OV( 937),  39 },
+  { OV( 966),  30 },
+  { OV( 986),  20 },
+  { OV(1000),  10 },
+  { OV(1010),   0 },
+  { OV(1024),-273 } // for safety
+};
diff --git a/Marlin/src/module/thermistor/thermistor_2.h b/Marlin/src/module/thermistor/thermistor_2.h
new file mode 100644
index 0000000..d0e1e4f
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_2.h
@@ -0,0 +1,62 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//
+// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
+// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+//
+const temp_entry_t temptable_2[] PROGMEM = {
+  { OV(   1), 848 },
+  { OV(  30), 300 }, // top rating 300C
+  { OV(  34), 290 },
+  { OV(  39), 280 },
+  { OV(  46), 270 },
+  { OV(  53), 260 },
+  { OV(  63), 250 },
+  { OV(  74), 240 },
+  { OV(  87), 230 },
+  { OV( 104), 220 },
+  { OV( 124), 210 },
+  { OV( 148), 200 },
+  { OV( 176), 190 },
+  { OV( 211), 180 },
+  { OV( 252), 170 },
+  { OV( 301), 160 },
+  { OV( 357), 150 },
+  { OV( 420), 140 },
+  { OV( 489), 130 },
+  { OV( 562), 120 },
+  { OV( 636), 110 },
+  { OV( 708), 100 },
+  { OV( 775),  90 },
+  { OV( 835),  80 },
+  { OV( 884),  70 },
+  { OV( 924),  60 },
+  { OV( 955),  50 },
+  { OV( 977),  40 },
+  { OV( 993),  30 },
+  { OV(1004),  20 },
+  { OV(1012),  10 },
+  { OV(1016),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_20.h b/Marlin/src/module/thermistor/thermistor_20.h
new file mode 100644
index 0000000..73094f1
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_20.h
@@ -0,0 +1,77 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_20 1
+
+// Pt100 with INA826 amp on Ultimaker v2.0 electronics
+const temp_entry_t temptable_20[] PROGMEM = {
+  { OV(  0),    0 },
+  { OV(227),    1 },
+  { OV(236),   10 },
+  { OV(245),   20 },
+  { OV(253),   30 },
+  { OV(262),   40 },
+  { OV(270),   50 },
+  { OV(279),   60 },
+  { OV(287),   70 },
+  { OV(295),   80 },
+  { OV(304),   90 },
+  { OV(312),  100 },
+  { OV(320),  110 },
+  { OV(329),  120 },
+  { OV(337),  130 },
+  { OV(345),  140 },
+  { OV(353),  150 },
+  { OV(361),  160 },
+  { OV(369),  170 },
+  { OV(377),  180 },
+  { OV(385),  190 },
+  { OV(393),  200 },
+  { OV(401),  210 },
+  { OV(409),  220 },
+  { OV(417),  230 },
+  { OV(424),  240 },
+  { OV(432),  250 },
+  { OV(440),  260 },
+  { OV(447),  270 },
+  { OV(455),  280 },
+  { OV(463),  290 },
+  { OV(470),  300 },
+  { OV(478),  310 },
+  { OV(485),  320 },
+  { OV(493),  330 },
+  { OV(500),  340 },
+  { OV(507),  350 },
+  { OV(515),  360 },
+  { OV(522),  370 },
+  { OV(529),  380 },
+  { OV(537),  390 },
+  { OV(544),  400 },
+  { OV(614),  500 },
+  { OV(681),  600 },
+  { OV(744),  700 },
+  { OV(805),  800 },
+  { OV(862),  900 },
+  { OV(917), 1000 },
+  { OV(968), 1100 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_201.h b/Marlin/src/module/thermistor/thermistor_201.h
new file mode 100644
index 0000000..44d5280
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_201.h
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_201 1
+
+// Pt100 with LMV324 amp on Overlord v1.1 electronics
+const temp_entry_t temptable_201[] PROGMEM = {
+  { OV(   0),   0 },
+  { OV(   8),   1 },
+  { OV(  23),   6 },
+  { OV(  41),  15 },
+  { OV(  51),  20 },
+  { OV(  68),  28 },
+  { OV(  74),  30 },
+  { OV(  88),  35 },
+  { OV(  99),  40 },
+  { OV( 123),  50 },
+  { OV( 148),  60 },
+  { OV( 173),  70 },
+  { OV( 198),  80 },
+  { OV( 221),  90 },
+  { OV( 245), 100 },
+  { OV( 269), 110 },
+  { OV( 294), 120 },
+  { OV( 316), 130 },
+  { OV( 342), 140 },
+  { OV( 364), 150 },
+  { OV( 387), 160 },
+  { OV( 412), 170 },
+  { OV( 433), 180 },
+  { OV( 456), 190 },
+  { OV( 480), 200 },
+  { OV( 500), 210 },
+  { OV( 548), 224 },
+  { OV( 572), 233 },
+  { OV(1155), 490 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_202.h b/Marlin/src/module/thermistor/thermistor_202.h
new file mode 100644
index 0000000..c522960
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_202.h
@@ -0,0 +1,69 @@
+//
+// Unknown 200K thermistor on a Copymaster 3D hotend
+// Temptable sent from dealer technologyoutlet.co.uk
+//
+
+const temp_entry_t temptable_202[] PROGMEM = {
+  { OV(   1), 864 },
+  { OV(  35), 300 },
+  { OV(  38), 295 },
+  { OV(  41), 290 },
+  { OV(  44), 285 },
+  { OV(  47), 280 },
+  { OV(  51), 275 },
+  { OV(  55), 270 },
+  { OV(  60), 265 },
+  { OV(  65), 260 },
+  { OV(  70), 255 },
+  { OV(  76), 250 },
+  { OV(  83), 245 },
+  { OV(  90), 240 },
+  { OV(  98), 235 },
+  { OV( 107), 230 },
+  { OV( 116), 225 },
+  { OV( 127), 220 },
+  { OV( 138), 215 },
+  { OV( 151), 210 },
+  { OV( 164), 205 },
+  { OV( 179), 200 },
+  { OV( 195), 195 },
+  { OV( 213), 190 },
+  { OV( 232), 185 },
+  { OV( 253), 180 },
+  { OV( 275), 175 },
+  { OV( 299), 170 },
+  { OV( 325), 165 },
+  { OV( 352), 160 },
+  { OV( 381), 155 },
+  { OV( 411), 150 },
+  { OV( 443), 145 },
+  { OV( 476), 140 },
+  { OV( 511), 135 },
+  { OV( 546), 130 },
+  { OV( 581), 125 },
+  { OV( 617), 120 },
+  { OV( 652), 115 },
+  { OV( 687), 110 },
+  { OV( 720), 105 },
+  { OV( 753), 100 },
+  { OV( 783),  95 },
+  { OV( 812),  90 },
+  { OV( 839),  85 },
+  { OV( 864),  80 },
+  { OV( 886),  75 },
+  { OV( 906),  70 },
+  { OV( 924),  65 },
+  { OV( 940),  60 },
+  { OV( 954),  55 },
+  { OV( 966),  50 },
+  { OV( 976),  45 },
+  { OV( 985),  40 },
+  { OV( 992),  35 },
+  { OV( 998),  30 },
+  { OV(1003),  25 },
+  { OV(1007),  20 },
+  { OV(1011),  15 },
+  { OV(1014),  10 },
+  { OV(1016),   5 },
+  { OV(1018),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_21.h b/Marlin/src/module/thermistor/thermistor_21.h
new file mode 100644
index 0000000..2ca705b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_21.h
@@ -0,0 +1,78 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define REVERSE_TEMP_SENSOR_RANGE_21 1
+
+#undef OV_SCALE
+#define OV_SCALE(N) (float((N) * 5) / 3.3f)
+
+// Pt100 with INA826 amplifier board with 5v supply based on Thermistor 20, with 3v3 ADC reference on the mainboard.
+// If the ADC reference and INA826 board supply voltage are identical, Thermistor 20 instead.
+const temp_entry_t temptable_21[] PROGMEM = {
+  { OV(  0),    0 },
+  { OV(227),    1 },
+  { OV(236),   10 },
+  { OV(245),   20 },
+  { OV(253),   30 },
+  { OV(262),   40 },
+  { OV(270),   50 },
+  { OV(279),   60 },
+  { OV(287),   70 },
+  { OV(295),   80 },
+  { OV(304),   90 },
+  { OV(312),  100 },
+  { OV(320),  110 },
+  { OV(329),  120 },
+  { OV(337),  130 },
+  { OV(345),  140 },
+  { OV(353),  150 },
+  { OV(361),  160 },
+  { OV(369),  170 },
+  { OV(377),  180 },
+  { OV(385),  190 },
+  { OV(393),  200 },
+  { OV(401),  210 },
+  { OV(409),  220 },
+  { OV(417),  230 },
+  { OV(424),  240 },
+  { OV(432),  250 },
+  { OV(440),  260 },
+  { OV(447),  270 },
+  { OV(455),  280 },
+  { OV(463),  290 },
+  { OV(470),  300 },
+  { OV(478),  310 },
+  { OV(485),  320 },
+  { OV(493),  330 },
+  { OV(500),  340 },
+  { OV(507),  350 },
+  { OV(515),  360 },
+  { OV(522),  370 },
+  { OV(529),  380 },
+  { OV(537),  390 },
+  { OV(544),  400 },
+  { OV(614),  500 }
+};
+
+#undef OV_SCALE
+#define OV_SCALE(N) (N)
diff --git a/Marlin/src/module/thermistor/thermistor_22.h b/Marlin/src/module/thermistor/thermistor_22.h
new file mode 100644
index 0000000..6f4a310
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_22.h
@@ -0,0 +1,72 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+// 100k hotend thermistor with 4.7k pull up to 3.3v and 220R to analog input as in GTM32 Pro vB
+const temp_entry_t temptable_22[] PROGMEM = {
+  { OV(   1), 352 },
+  { OV(   6), 341 },
+  { OV(  11), 330 },
+  { OV(  16), 319 },
+  { OV(  20), 307 },
+  { OV(  26), 296 },
+  { OV(  31), 285 },
+  { OV(  40), 274 },
+  { OV(  51), 263 },
+  { OV(  61), 251 },
+  { OV(  72), 245 },
+  { OV(  77), 240 },
+  { OV(  82), 237 },
+  { OV(  87), 232 },
+  { OV(  91), 229 },
+  { OV(  94), 227 },
+  { OV(  97), 225 },
+  { OV( 100), 223 },
+  { OV( 104), 221 },
+  { OV( 108), 219 },
+  { OV( 115), 214 },
+  { OV( 126), 209 },
+  { OV( 137), 204 },
+  { OV( 147), 200 },
+  { OV( 158), 193 },
+  { OV( 167), 192 },
+  { OV( 177), 189 },
+  { OV( 197), 163 },
+  { OV( 230), 174 },
+  { OV( 267), 165 },
+  { OV( 310), 158 },
+  { OV( 336), 151 },
+  { OV( 379), 143 },
+  { OV( 413), 138 },
+  { OV( 480), 127 },
+  { OV( 580), 110 },
+  { OV( 646), 100 },
+  { OV( 731),  88 },
+  { OV( 768),  84 },
+  { OV( 861),  69 },
+  { OV( 935),  50 },
+  { OV( 975),  38 },
+  { OV(1001),  27 },
+  { OV(1011),  22 },
+  { OV(1015),  13 },
+  { OV(1020),   6 },
+  { OV(1023),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_23.h b/Marlin/src/module/thermistor/thermistor_23.h
new file mode 100644
index 0000000..02ff9fb
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_23.h
@@ -0,0 +1,128 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+// 100k hotbed thermistor with 4.7k pull up to 3.3v and 220R to analog input as in GTM32 Pro vB
+const temp_entry_t temptable_23[] PROGMEM = {
+  { OV(   1), 938 },
+  { OV(  11), 423 },
+  { OV(  21), 351 },
+  { OV(  31), 314 },
+  { OV(  41), 290 },
+  { OV(  51), 272 },
+  { OV(  61), 258 },
+  { OV(  71), 247 },
+  { OV(  81), 237 },
+  { OV(  91), 229 },
+  { OV( 101), 221 },
+  { OV( 111), 215 },
+  { OV( 121), 209 },
+  { OV( 131), 204 },
+  { OV( 141), 199 },
+  { OV( 151), 195 },
+  { OV( 161), 190 },
+  { OV( 171), 187 },
+  { OV( 181), 183 },
+  { OV( 191), 179 },
+  { OV( 201), 176 },
+  { OV( 211), 173 },
+  { OV( 221), 170 },
+  { OV( 231), 167 },
+  { OV( 241), 165 },
+  { OV( 251), 162 },
+  { OV( 261), 160 },
+  { OV( 271), 157 },
+  { OV( 281), 155 },
+  { OV( 291), 153 },
+  { OV( 301), 150 },
+  { OV( 311), 148 },
+  { OV( 321), 146 },
+  { OV( 331), 144 },
+  { OV( 341), 142 },
+  { OV( 351), 140 },
+  { OV( 361), 139 },
+  { OV( 371), 137 },
+  { OV( 381), 135 },
+  { OV( 391), 133 },
+  { OV( 401), 131 },
+  { OV( 411), 130 },
+  { OV( 421), 128 },
+  { OV( 431), 126 },
+  { OV( 441), 125 },
+  { OV( 451), 123 },
+  { OV( 461), 122 },
+  { OV( 471), 120 },
+  { OV( 481), 119 },
+  { OV( 491), 117 },
+  { OV( 501), 116 },
+  { OV( 511), 114 },
+  { OV( 521), 113 },
+  { OV( 531), 111 },
+  { OV( 541), 110 },
+  { OV( 551), 108 },
+  { OV( 561), 107 },
+  { OV( 571), 105 },
+  { OV( 581), 104 },
+  { OV( 591), 102 },
+  { OV( 601), 101 },
+  { OV( 611), 100 },
+  { OV( 621),  98 },
+  { OV( 631),  97 },
+  { OV( 641),  95 },
+  { OV( 651),  94 },
+  { OV( 661),  92 },
+  { OV( 671),  91 },
+  { OV( 681),  90 },
+  { OV( 691),  88 },
+  { OV( 701),  87 },
+  { OV( 711),  85 },
+  { OV( 721),  84 },
+  { OV( 731),  82 },
+  { OV( 741),  81 },
+  { OV( 751),  79 },
+  { OV( 761),  77 },
+  { OV( 771),  76 },
+  { OV( 781),  74 },
+  { OV( 791),  72 },
+  { OV( 801),  71 },
+  { OV( 811),  69 },
+  { OV( 821),  67 },
+  { OV( 831),  65 },
+  { OV( 841),  63 },
+  { OV( 851),  62 },
+  { OV( 861),  60 },
+  { OV( 871),  57 },
+  { OV( 881),  55 },
+  { OV( 891),  53 },
+  { OV( 901),  51 },
+  { OV( 911),  48 },
+  { OV( 921),  45 },
+  { OV( 931),  42 },
+  { OV( 941),  39 },
+  { OV( 951),  36 },
+  { OV( 961),  32 },
+  { OV( 971),  28 },
+  { OV( 981),  25 },
+  { OV( 991),  23 },
+  { OV(1001),  21 },
+  { OV(1011),  19 },
+  { OV(1021),   5 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_3.h b/Marlin/src/module/thermistor/thermistor_3.h
new file mode 100644
index 0000000..74e00e2
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_3.h
@@ -0,0 +1,54 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4120 K, 4.7 kOhm pull-up, mendel-parts
+const temp_entry_t temptable_3[] PROGMEM = {
+  { OV(   1), 864 },
+  { OV(  21), 300 },
+  { OV(  25), 290 },
+  { OV(  29), 280 },
+  { OV(  33), 270 },
+  { OV(  39), 260 },
+  { OV(  46), 250 },
+  { OV(  54), 240 },
+  { OV(  64), 230 },
+  { OV(  75), 220 },
+  { OV(  90), 210 },
+  { OV( 107), 200 },
+  { OV( 128), 190 },
+  { OV( 154), 180 },
+  { OV( 184), 170 },
+  { OV( 221), 160 },
+  { OV( 265), 150 },
+  { OV( 316), 140 },
+  { OV( 375), 130 },
+  { OV( 441), 120 },
+  { OV( 513), 110 },
+  { OV( 588), 100 },
+  { OV( 734),  80 },
+  { OV( 856),  60 },
+  { OV( 938),  40 },
+  { OV( 986),  20 },
+  { OV(1008),   0 },
+  { OV(1018), -20 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_30.h b/Marlin/src/module/thermistor/thermistor_30.h
new file mode 100644
index 0000000..bc1781b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_30.h
@@ -0,0 +1,66 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up
+// Resistance         100k Ohms at 25deg. C
+// Resistance Tolerance     + / -1%
+// B Value             3950K at 25/50 deg. C
+// B Value Tolerance         + / - 1%
+// Kis3d Silicone Heater 24V 200W/300W with 6mm Precision cast plate (EN AW 5083)
+// Temperature setting time 10 min to determine the 12Bit ADC value on the surface. (le3tspeak)
+const temp_entry_t temptable_30[] PROGMEM = {
+  { OV(   1), 938 },
+  { OV( 298), 125 }, // 1193 - 125°
+  { OV( 321), 121 }, // 1285 - 121°
+  { OV( 348), 117 }, // 1392 - 117°
+  { OV( 387), 113 }, // 1550 - 113°
+  { OV( 411), 110 }, // 1644 - 110°
+  { OV( 445), 106 }, // 1780 - 106°
+  { OV( 480), 101 }, // 1920 - 101°
+  { OV( 516),  97 }, // 2064 - 97°
+  { OV( 553),  92 }, // 2212 - 92°
+  { OV( 591),  88 }, // 2364 - 88°
+  { OV( 628),  84 }, // 2512 - 84°
+  { OV( 665),  79 }, // 2660 - 79°
+  { OV( 702),  75 }, // 2808 - 75°
+  { OV( 736),  71 }, // 2945 - 71°
+  { OV( 770),  67 }, // 3080 - 67°
+  { OV( 801),  63 }, // 3204 - 63°
+  { OV( 830),  59 }, // 3320 - 59°
+  { OV( 857),  55 }, // 3428 - 55°
+  { OV( 881),  51 }, // 3524 - 51°
+  { OV( 902),  47 }, // 3611 - 47°
+  { OV( 922),  42 }, // 3688 - 42°
+  { OV( 938),  38 }, // 3754 - 38°
+  { OV( 952),  34 }, // 3811 - 34°
+  { OV( 964),  29 }, // 3857 - 29°
+  { OV( 975),  25 }, // 3900 - 25°
+  { OV( 980),  23 }, // 3920 - 23°
+  { OV( 991),  17 }, // 3964 - 17°
+  { OV(1001),   9 }, // Calculated
+  { OV(1004),   5 }, // Calculated
+  { OV(1008),   0 }, // Calculated
+  { OV(1012),  -5 }, // Calculated
+  { OV(1016), -10 }, // Calculated
+  { OV(1020), -15 }  // Calculated
+};
diff --git a/Marlin/src/module/thermistor/thermistor_331.h b/Marlin/src/module/thermistor/thermistor_331.h
new file mode 100644
index 0000000..ccb0f6b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_331.h
@@ -0,0 +1,92 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define OVM(V) OV((V)*(0.327/0.5))
+
+// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
+const temp_entry_t temptable_331[] PROGMEM = {
+  { OVM(  23), 300 },
+  { OVM(  25), 295 },
+  { OVM(  27), 290 },
+  { OVM(  28), 285 },
+  { OVM(  31), 280 },
+  { OVM(  33), 275 },
+  { OVM(  35), 270 },
+  { OVM(  38), 265 },
+  { OVM(  41), 260 },
+  { OVM(  44), 255 },
+  { OVM(  48), 250 },
+  { OVM(  52), 245 },
+  { OVM(  56), 240 },
+  { OVM(  61), 235 },
+  { OVM(  66), 230 },
+  { OVM(  71), 225 },
+  { OVM(  78), 220 },
+  { OVM(  84), 215 },
+  { OVM(  92), 210 },
+  { OVM( 100), 205 },
+  { OVM( 109), 200 },
+  { OVM( 120), 195 },
+  { OVM( 131), 190 },
+  { OVM( 143), 185 },
+  { OVM( 156), 180 },
+  { OVM( 171), 175 },
+  { OVM( 187), 170 },
+  { OVM( 205), 165 },
+  { OVM( 224), 160 },
+  { OVM( 245), 155 },
+  { OVM( 268), 150 },
+  { OVM( 293), 145 },
+  { OVM( 320), 140 },
+  { OVM( 348), 135 },
+  { OVM( 379), 130 },
+  { OVM( 411), 125 },
+  { OVM( 445), 120 },
+  { OVM( 480), 115 },
+  { OVM( 516), 110 },
+  { OVM( 553), 105 },
+  { OVM( 591), 100 },
+  { OVM( 628),  95 },
+  { OVM( 665),  90 },
+  { OVM( 702),  85 },
+  { OVM( 737),  80 },
+  { OVM( 770),  75 },
+  { OVM( 801),  70 },
+  { OVM( 830),  65 },
+  { OVM( 857),  60 },
+  { OVM( 881),  55 },
+  { OVM( 903),  50 },
+  { OVM( 922),  45 },
+  { OVM( 939),  40 },
+  { OVM( 954),  35 },
+  { OVM( 966),  30 },
+  { OVM( 977),  25 },
+  { OVM( 985),  20 },
+  { OVM( 993),  15 },
+  { OVM( 999),  10 },
+  { OVM(1004),   5 },
+  { OVM(1008),   0 },
+  { OVM(1012),  -5 },
+  { OVM(1016), -10 },
+  { OVM(1020), -15 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_332.h b/Marlin/src/module/thermistor/thermistor_332.h
new file mode 100644
index 0000000..9502f1b
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_332.h
@@ -0,0 +1,50 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define OVM(V) OV((V)*(0.327/0.327))
+
+// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
+const temp_entry_t temptable_332[] PROGMEM = {
+  { OVM( 268), 150 },
+  { OVM( 293), 145 },
+  { OVM( 320), 141 },
+  { OVM( 379), 133 },
+  { OVM( 445), 122 },
+  { OVM( 516), 108 },
+  { OVM( 591),  98 },
+  { OVM( 665),  88 },
+  { OVM( 737),  79 },
+  { OVM( 801),  70 },
+  { OVM( 857),  55 },
+  { OVM( 903),  46 },
+  { OVM( 939),  39 },
+  { OVM( 954),  33 },
+  { OVM( 966),  27 },
+  { OVM( 977),  22 },
+  { OVM( 999),  15 },
+  { OVM(1004),   5 },
+  { OVM(1008),   0 },
+  { OVM(1012),  -5 },
+  { OVM(1016), -10 },
+  { OVM(1020), -15 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_4.h b/Marlin/src/module/thermistor/thermistor_4.h
new file mode 100644
index 0000000..92d9072
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_4.h
@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 10 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, Generic 10k thermistor
+const temp_entry_t temptable_4[] PROGMEM = {
+  { OV(   1), 430 },
+  { OV(  54), 137 },
+  { OV( 107), 107 },
+  { OV( 160),  91 },
+  { OV( 213),  80 },
+  { OV( 266),  71 },
+  { OV( 319),  64 },
+  { OV( 372),  57 },
+  { OV( 425),  51 },
+  { OV( 478),  46 },
+  { OV( 531),  41 },
+  { OV( 584),  35 },
+  { OV( 637),  30 },
+  { OV( 690),  25 },
+  { OV( 743),  20 },
+  { OV( 796),  14 },
+  { OV( 849),   7 },
+  { OV( 902),   0 },
+  { OV( 955), -11 },
+  { OV(1008), -35 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_5.h b/Marlin/src/module/thermistor/thermistor_5.h
new file mode 100644
index 0000000..1d5fa2f
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_5.h
@@ -0,0 +1,62 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
+// 100k ParCan thermistor (104GT-2)
+// ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
+// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+const temp_entry_t temptable_5[] PROGMEM = {
+  { OV(   1), 713 },
+  { OV(  17), 300 }, // top rating 300C
+  { OV(  20), 290 },
+  { OV(  23), 280 },
+  { OV(  27), 270 },
+  { OV(  31), 260 },
+  { OV(  37), 250 },
+  { OV(  43), 240 },
+  { OV(  51), 230 },
+  { OV(  61), 220 },
+  { OV(  73), 210 },
+  { OV(  87), 200 },
+  { OV( 106), 190 },
+  { OV( 128), 180 },
+  { OV( 155), 170 },
+  { OV( 189), 160 },
+  { OV( 230), 150 },
+  { OV( 278), 140 },
+  { OV( 336), 130 },
+  { OV( 402), 120 },
+  { OV( 476), 110 },
+  { OV( 554), 100 },
+  { OV( 635),  90 },
+  { OV( 713),  80 },
+  { OV( 784),  70 },
+  { OV( 846),  60 },
+  { OV( 897),  50 },
+  { OV( 937),  40 },
+  { OV( 966),  30 },
+  { OV( 986),  20 },
+  { OV(1000),  10 },
+  { OV(1010),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_501.h b/Marlin/src/module/thermistor/thermistor_501.h
new file mode 100644
index 0000000..d40e341
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_501.h
@@ -0,0 +1,58 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// 100k Zonestar thermistor. Adjusted By Hally
+const temp_entry_t temptable_501[] PROGMEM = {
+   { OV(   1), 713 },
+   { OV(  14), 300 }, // Top rating 300C
+   { OV(  16), 290 },
+   { OV(  19), 280 },
+   { OV(  23), 270 },
+   { OV(  27), 260 },
+   { OV(  31), 250 },
+   { OV(  37), 240 },
+   { OV(  47), 230 },
+   { OV(  57), 220 },
+   { OV(  68), 210 },
+   { OV(  84), 200 },
+   { OV( 100), 190 },
+   { OV( 128), 180 },
+   { OV( 155), 170 },
+   { OV( 189), 160 },
+   { OV( 230), 150 },
+   { OV( 278), 140 },
+   { OV( 336), 130 },
+   { OV( 402), 120 },
+   { OV( 476), 110 },
+   { OV( 554), 100 },
+   { OV( 635),  90 },
+   { OV( 713),  80 },
+   { OV( 784),  70 },
+   { OV( 846),  60 },
+   { OV( 897),  50 },
+   { OV( 937),  40 },
+   { OV( 966),  30 },
+   { OV( 986),  20 },
+   { OV(1000),  10 },
+   { OV(1010),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_502.h b/Marlin/src/module/thermistor/thermistor_502.h
new file mode 100644
index 0000000..69cee24
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_502.h
@@ -0,0 +1,60 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Unknown thermistor for the Zonestar P802M hot bed. Adjusted By Nerseth
+// These were the shipped settings from Zonestar in original firmware: P802M_8_Repetier_V1.6_Zonestar.zip
+const temp_entry_t temptable_502[] PROGMEM = {
+   { OV(  56.0 / 4), 300 },
+   { OV( 187.0 / 4), 250 },
+   { OV( 615.0 / 4), 190 },
+   { OV( 690.0 / 4), 185 },
+   { OV( 750.0 / 4), 180 },
+   { OV( 830.0 / 4), 175 },
+   { OV( 920.0 / 4), 170 },
+   { OV(1010.0 / 4), 165 },
+   { OV(1118.0 / 4), 160 },
+   { OV(1215.0 / 4), 155 },
+   { OV(1330.0 / 4), 145 },
+   { OV(1460.0 / 4), 140 },
+   { OV(1594.0 / 4), 135 },
+   { OV(1752.0 / 4), 130 },
+   { OV(1900.0 / 4), 125 },
+   { OV(2040.0 / 4), 120 },
+   { OV(2200.0 / 4), 115 },
+   { OV(2350.0 / 4), 110 },
+   { OV(2516.0 / 4), 105 },
+   { OV(2671.0 / 4),  98 },
+   { OV(2831.0 / 4),  92 },
+   { OV(2975.0 / 4),  85 },
+   { OV(3115.0 / 4),  76 },
+   { OV(3251.0 / 4),  72 },
+   { OV(3480.0 / 4),  62 },
+   { OV(3580.0 / 4),  52 },
+   { OV(3660.0 / 4),  46 },
+   { OV(3740.0 / 4),  40 },
+   { OV(3869.0 / 4),  30 },
+   { OV(3912.0 / 4),  25 },
+   { OV(3948.0 / 4),  20 },
+   { OV(4077.0 / 4), -20 },
+   { OV(4094.0 / 4), -55 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_503.h b/Marlin/src/module/thermistor/thermistor_503.h
new file mode 100644
index 0000000..fc4bfff
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_503.h
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Zonestar (Z8XM2) Heated Bed thermistor. Added By AvanOsch
+// These are taken from the Zonestar settings in original Repetier firmware: Z8XM2_ZRIB_LCD12864_V51.zip
+const temp_entry_t temptable_503[] PROGMEM = {
+   { OV(  12), 300 },
+   { OV(  27), 270 },
+   { OV(  47), 250 },
+   { OV(  68), 230 },
+   { OV(  99), 210 },
+   { OV( 120), 200 },
+   { OV( 141), 190 },
+   { OV( 171), 180 },
+   { OV( 201), 170 },
+   { OV( 261), 160 },
+   { OV( 321), 150 },
+   { OV( 401), 140 },
+   { OV( 451), 130 },
+   { OV( 551), 120 },
+   { OV( 596), 110 },
+   { OV( 626), 105 },
+   { OV( 666), 100 },
+   { OV( 697), 90 },
+   { OV( 717), 85 },
+   { OV( 798), 69 },
+   { OV( 819), 65 },
+   { OV( 870), 55 },
+   { OV( 891), 51 },
+   { OV( 922), 39 },
+   { OV( 968), 28 },
+   { OV( 980), 23 },
+   { OV( 991), 17 },
+   { OV( 1001), 9 },
+   { OV(1021), -27 },
+   { OV(1023), -200}
+};
diff --git a/Marlin/src/module/thermistor/thermistor_51.h b/Marlin/src/module/thermistor/thermistor_51.h
new file mode 100644
index 0000000..d02dd47
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_51.h
@@ -0,0 +1,83 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4092 K, 1 kOhm pull-up,
+// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee.
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: Twice the resolution and better linearity from 150C to 200C
+const temp_entry_t temptable_51[] PROGMEM = {
+  { OV(   1), 350 },
+  { OV( 190), 250 }, // top rating 250C
+  { OV( 203), 245 },
+  { OV( 217), 240 },
+  { OV( 232), 235 },
+  { OV( 248), 230 },
+  { OV( 265), 225 },
+  { OV( 283), 220 },
+  { OV( 302), 215 },
+  { OV( 322), 210 },
+  { OV( 344), 205 },
+  { OV( 366), 200 },
+  { OV( 390), 195 },
+  { OV( 415), 190 },
+  { OV( 440), 185 },
+  { OV( 467), 180 },
+  { OV( 494), 175 },
+  { OV( 522), 170 },
+  { OV( 551), 165 },
+  { OV( 580), 160 },
+  { OV( 609), 155 },
+  { OV( 638), 150 },
+  { OV( 666), 145 },
+  { OV( 695), 140 },
+  { OV( 722), 135 },
+  { OV( 749), 130 },
+  { OV( 775), 125 },
+  { OV( 800), 120 },
+  { OV( 823), 115 },
+  { OV( 845), 110 },
+  { OV( 865), 105 },
+  { OV( 884), 100 },
+  { OV( 901),  95 },
+  { OV( 917),  90 },
+  { OV( 932),  85 },
+  { OV( 944),  80 },
+  { OV( 956),  75 },
+  { OV( 966),  70 },
+  { OV( 975),  65 },
+  { OV( 982),  60 },
+  { OV( 989),  55 },
+  { OV( 995),  50 },
+  { OV(1000),  45 },
+  { OV(1004),  40 },
+  { OV(1007),  35 },
+  { OV(1010),  30 },
+  { OV(1013),  25 },
+  { OV(1015),  20 },
+  { OV(1017),  15 },
+  { OV(1018),  10 },
+  { OV(1019),   5 },
+  { OV(1020),   0 },
+  { OV(1021),  -5 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_512.h b/Marlin/src/module/thermistor/thermistor_512.h
new file mode 100644
index 0000000..e8021e1
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_512.h
@@ -0,0 +1,87 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+// 100k thermistor supplied with RPW-Ultra hotend, 4.7k pullup
+
+const temp_entry_t temptable_512[] PROGMEM = {
+  { OV(26),  300 },
+  { OV(28),  295 },
+  { OV(30),  290 },
+  { OV(32),  285 },
+  { OV(34),  280 },
+  { OV(37),  275 },
+  { OV(39),  270 },
+  { OV(42),  265 },
+  { OV(46),  260 },
+  { OV(49),  255 },
+  { OV(53),  250 }, // 256.5
+  { OV(57),  245 },
+  { OV(62),  240 },
+  { OV(67),  235 },
+  { OV(73),  230 },
+  { OV(79),  225 },
+  { OV(86),  220 },
+  { OV(94),  215 },
+  { OV(103), 210 },
+  { OV(112), 205 },
+  { OV(123), 200 },
+  { OV(135), 195 },
+  { OV(148), 190 },
+  { OV(162), 185 },
+  { OV(178), 180 },
+  { OV(195), 175 },
+  { OV(215), 170 },
+  { OV(235), 165 },
+  { OV(258), 160 },
+  { OV(283), 155 },
+  { OV(310), 150 }, // 2040.6
+  { OV(338), 145 },
+  { OV(369), 140 },
+  { OV(401), 135 },
+  { OV(435), 130 },
+  { OV(470), 125 },
+  { OV(505), 120 },
+  { OV(542), 115 },
+  { OV(579), 110 },
+  { OV(615), 105 },
+  { OV(651), 100 },
+  { OV(686),  95 },
+  { OV(720),  90 },
+  { OV(751),  85 },
+  { OV(781),  80 },
+  { OV(809),  75 },
+  { OV(835),  70 },
+  { OV(858),  65 },
+  { OV(880),  60 },
+  { OV(899),  55 },
+  { OV(915),  50 },
+  { OV(930),  45 },
+  { OV(944),  40 },
+  { OV(955),  35 },
+  { OV(965),  30 }, // 78279.3
+  { OV(974),  25 },
+  { OV(981),  20 },
+  { OV(988),  15 },
+  { OV(993),  10 },
+  { OV(998),   5 },
+  { OV(1002),  0 },
+};
diff --git a/Marlin/src/module/thermistor/thermistor_52.h b/Marlin/src/module/thermistor/thermistor_52.h
new file mode 100644
index 0000000..5c9cb9d
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_52.h
@@ -0,0 +1,62 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
+// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: More resolution and better linearity from 150C to 200C
+const temp_entry_t temptable_52[] PROGMEM = {
+  { OV(   1), 500 },
+  { OV( 125), 300 }, // top rating 300C
+  { OV( 142), 290 },
+  { OV( 162), 280 },
+  { OV( 185), 270 },
+  { OV( 211), 260 },
+  { OV( 240), 250 },
+  { OV( 274), 240 },
+  { OV( 312), 230 },
+  { OV( 355), 220 },
+  { OV( 401), 210 },
+  { OV( 452), 200 },
+  { OV( 506), 190 },
+  { OV( 563), 180 },
+  { OV( 620), 170 },
+  { OV( 677), 160 },
+  { OV( 732), 150 },
+  { OV( 783), 140 },
+  { OV( 830), 130 },
+  { OV( 871), 120 },
+  { OV( 906), 110 },
+  { OV( 935), 100 },
+  { OV( 958),  90 },
+  { OV( 976),  80 },
+  { OV( 990),  70 },
+  { OV(1000),  60 },
+  { OV(1008),  50 },
+  { OV(1013),  40 },
+  { OV(1017),  30 },
+  { OV(1019),  20 },
+  { OV(1021),  10 },
+  { OV(1022),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_55.h b/Marlin/src/module/thermistor/thermistor_55.h
new file mode 100644
index 0000000..707b7d4
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_55.h
@@ -0,0 +1,62 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
+// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: More resolution and better linearity from 150C to 200C
+const temp_entry_t temptable_55[] PROGMEM = {
+  { OV(   1), 500 },
+  { OV(  76), 300 },
+  { OV(  87), 290 },
+  { OV( 100), 280 },
+  { OV( 114), 270 },
+  { OV( 131), 260 },
+  { OV( 152), 250 },
+  { OV( 175), 240 },
+  { OV( 202), 230 },
+  { OV( 234), 220 },
+  { OV( 271), 210 },
+  { OV( 312), 200 },
+  { OV( 359), 190 },
+  { OV( 411), 180 },
+  { OV( 467), 170 },
+  { OV( 527), 160 },
+  { OV( 590), 150 },
+  { OV( 652), 140 },
+  { OV( 713), 130 },
+  { OV( 770), 120 },
+  { OV( 822), 110 },
+  { OV( 867), 100 },
+  { OV( 905),  90 },
+  { OV( 936),  80 },
+  { OV( 961),  70 },
+  { OV( 979),  60 },
+  { OV( 993),  50 },
+  { OV(1003),  40 },
+  { OV(1010),  30 },
+  { OV(1015),  20 },
+  { OV(1018),  10 },
+  { OV(1020),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_6.h b/Marlin/src/module/thermistor/thermistor_6.h
new file mode 100644
index 0000000..6811341
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_6.h
@@ -0,0 +1,64 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor
+const temp_entry_t temptable_6[] PROGMEM = {
+  { OV(   1), 350 },
+  { OV(  28), 250 }, // top rating 250C
+  { OV(  31), 245 },
+  { OV(  35), 240 },
+  { OV(  39), 235 },
+  { OV(  42), 230 },
+  { OV(  44), 225 },
+  { OV(  49), 220 },
+  { OV(  53), 215 },
+  { OV(  62), 210 },
+  { OV(  71), 205 }, // fitted graphically
+  { OV(  78), 200 }, // fitted graphically
+  { OV(  94), 190 },
+  { OV( 102), 185 },
+  { OV( 116), 170 },
+  { OV( 143), 160 },
+  { OV( 183), 150 },
+  { OV( 223), 140 },
+  { OV( 270), 130 },
+  { OV( 318), 120 },
+  { OV( 383), 110 },
+  { OV( 413), 105 },
+  { OV( 439), 100 },
+  { OV( 484),  95 },
+  { OV( 513),  90 },
+  { OV( 607),  80 },
+  { OV( 664),  70 },
+  { OV( 781),  60 },
+  { OV( 810),  55 },
+  { OV( 849),  50 },
+  { OV( 914),  45 },
+  { OV( 914),  40 },
+  { OV( 935),  35 },
+  { OV( 954),  30 },
+  { OV( 970),  25 },
+  { OV( 978),  22 },
+  { OV(1008),   3 },
+  { OV(1023),   0 } // to allow internal 0 degrees C
+};
diff --git a/Marlin/src/module/thermistor/thermistor_60.h b/Marlin/src/module/thermistor/thermistor_60.h
new file mode 100644
index 0000000..a3fe505
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_60.h
@@ -0,0 +1,107 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
+// Maker's Tool Works Kapton Bed Thermistor
+// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
+// r0: 100000
+// t0: 25
+// r1: 0 (parallel with rTherm)
+// r2: 4700 (series with rTherm)
+// beta: 3950
+// min adc: 1 at 0.0048828125 V
+// max adc: 1023 at 4.9951171875 V
+const temp_entry_t temptable_60[] PROGMEM = {
+  { OV(  51), 272 },
+  { OV(  61), 258 },
+  { OV(  71), 247 },
+  { OV(  81), 237 },
+  { OV(  91), 229 },
+  { OV( 101), 221 },
+  { OV( 131), 204 },
+  { OV( 161), 190 },
+  { OV( 191), 179 },
+  { OV( 231), 167 },
+  { OV( 271), 157 },
+  { OV( 311), 148 },
+  { OV( 351), 140 },
+  { OV( 381), 135 },
+  { OV( 411), 130 },
+  { OV( 441), 125 },
+  { OV( 451), 123 },
+  { OV( 461), 122 },
+  { OV( 471), 120 },
+  { OV( 481), 119 },
+  { OV( 491), 117 },
+  { OV( 501), 116 },
+  { OV( 511), 114 },
+  { OV( 521), 113 },
+  { OV( 531), 111 },
+  { OV( 541), 110 },
+  { OV( 551), 108 },
+  { OV( 561), 107 },
+  { OV( 571), 105 },
+  { OV( 581), 104 },
+  { OV( 591), 102 },
+  { OV( 601), 101 },
+  { OV( 611), 100 },
+  { OV( 621),  98 },
+  { OV( 631),  97 },
+  { OV( 641),  95 },
+  { OV( 651),  94 },
+  { OV( 661),  92 },
+  { OV( 671),  91 },
+  { OV( 681),  90 },
+  { OV( 691),  88 },
+  { OV( 701),  87 },
+  { OV( 711),  85 },
+  { OV( 721),  84 },
+  { OV( 731),  82 },
+  { OV( 741),  81 },
+  { OV( 751),  79 },
+  { OV( 761),  77 },
+  { OV( 771),  76 },
+  { OV( 781),  74 },
+  { OV( 791),  72 },
+  { OV( 801),  71 },
+  { OV( 811),  69 },
+  { OV( 821),  67 },
+  { OV( 831),  65 },
+  { OV( 841),  63 },
+  { OV( 851),  62 },
+  { OV( 861),  60 },
+  { OV( 871),  57 },
+  { OV( 881),  55 },
+  { OV( 891),  53 },
+  { OV( 901),  51 },
+  { OV( 911),  48 },
+  { OV( 921),  45 },
+  { OV( 931),  42 },
+  { OV( 941),  39 },
+  { OV( 951),  36 },
+  { OV( 961),  32 },
+  { OV( 981),  23 },
+  { OV( 991),  17 },
+  { OV(1001),   9 },
+  { OV(1008),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_61.h b/Marlin/src/module/thermistor/thermistor_61.h
new file mode 100644
index 0000000..ed4c4c8
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_61.h
@@ -0,0 +1,116 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
+// Formbot / Vivedino high temp 100k thermistor
+// 100KR13950181203
+// Generated with modified version of https://www.thingiverse.com/thing:103668
+// Using table 1 with datasheet values
+// Resistance         100k Ohms at 25deg. C
+// Resistance Tolerance     + / -1%
+// B Value             3950K at 25/50 deg. C
+// B Value Tolerance         + / - 1%
+const temp_entry_t temptable_61[] PROGMEM = {
+  { OV(   2.00), 420 }, // Guestimate to ensure we dont lose a reading and drop temps to -50 when over
+  { OV(  12.07), 350 },
+  { OV(  12.79), 345 },
+  { OV(  13.59), 340 },
+  { OV(  14.44), 335 },
+  { OV(  15.37), 330 },
+  { OV(  16.38), 325 },
+  { OV(  17.46), 320 },
+  { OV(  18.63), 315 },
+  { OV(  19.91), 310 },
+  { OV(  21.29), 305 },
+  { OV(  22.79), 300 },
+  { OV(  24.43), 295 },
+  { OV(  26.21), 290 },
+  { OV(  28.15), 285 },
+  { OV(  30.27), 280 },
+  { OV(  32.58), 275 },
+  { OV(  35.10), 270 },
+  { OV(  38.44), 265 },
+  { OV(  40.89), 260 },
+  { OV(  44.19), 255 },
+  { OV(  47.83), 250 },
+  { OV(  51.80), 245 },
+  { OV(  56.20), 240 },
+  { OV(  61.00), 235 },
+  { OV(  66.30), 230 },
+  { OV(  72.11), 225 },
+  { OV(  78.51), 220 },
+  { OV(  85.57), 215 },
+  { OV(  93.34), 210 },
+  { OV( 101.91), 205 },
+  { OV( 111.34), 200 },
+  { OV( 121.73), 195 },
+  { OV( 133.17), 190 },
+  { OV( 145.74), 185 },
+  { OV( 159.57), 180 },
+  { OV( 174.73), 175 },
+  { OV( 191.35), 170 },
+  { OV( 209.53), 165 },
+  { OV( 229.35), 160 },
+  { OV( 250.90), 155 },
+  { OV( 274.25), 150 },
+  { OV( 299.46), 145 },
+  { OV( 326.52), 140 },
+  { OV( 355.44), 135 },
+  { OV( 386.15), 130 },
+  { OV( 418.53), 125 },
+  { OV( 452.43), 120 },
+  { OV( 487.62), 115 },
+  { OV( 523.82), 110 },
+  { OV( 560.70), 105 },
+  { OV( 597.88), 100 },
+  { OV( 634.97),  95 },
+  { OV( 671.55),  90 },
+  { OV( 707.21),  85 },
+  { OV( 741.54),  80 },
+  { OV( 779.65),  75 },
+  { OV( 809.57),  70 },
+  { OV( 833.40),  65 },
+  { OV( 859.55),  60 },
+  { OV( 883.27),  55 },
+  { OV( 904.53),  50 },
+  { OV( 923.38),  45 },
+  { OV( 939.91),  40 },
+  { OV( 954.26),  35 },
+  { OV( 966.59),  30 },
+  { OV( 977.08),  25 },
+  { OV( 985.92),  20 },
+  { OV( 993.39),  15 },
+  { OV( 999.42),  10 },
+  { OV(1004.43),   5 },
+  { OV(1008.51),   0 },
+  { OV(1011.79),  -5 },
+  { OV(1014.40), -10 },
+  { OV(1016.48), -15 },
+  { OV(1018.10), -20 },
+  { OV(1019.35), -25 },
+  { OV(1020.32), -30 },
+  { OV(1021.05), -35 },
+  { OV(1021.60), -40 },
+  { OV(1022.01), -45 },
+  { OV(1022.31), -50 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_66.h b/Marlin/src/module/thermistor/thermistor_66.h
new file mode 100644
index 0000000..0ad5994
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_66.h
@@ -0,0 +1,53 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor
+const temp_entry_t temptable_66[] PROGMEM = {
+  { OV(  17.5), 850 },
+  { OV(  17.9), 500 },
+  { OV(  21.7), 480 },
+  { OV(  26.6), 460 },
+  { OV(  33.1), 440 },
+  { OV(  41.0), 420 },
+  { OV(  52.3), 400 },
+  { OV(  67.7), 380 },
+  { OV(  86.5), 360 },
+  { OV( 112.0), 340 },
+  { OV( 147.2), 320 },
+  { OV( 194.0), 300 },
+  { OV( 254.3), 280 },
+  { OV( 330.2), 260 },
+  { OV( 427.9), 240 },
+  { OV( 533.4), 220 },
+  { OV( 646.5), 200 },
+  { OV( 754.4), 180 },
+  { OV( 844.3), 160 },
+  { OV( 911.7), 140 },
+  { OV( 958.6), 120 },
+  { OV( 988.8), 100 },
+  { OV(1006.6),  80 },
+  { OV(1015.8),  60 },
+  { OV(1021.3),  30 },
+  { OV(  1022),  25 },
+  { OV(  1023),  20 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_666.h b/Marlin/src/module/thermistor/thermistor_666.h
new file mode 100644
index 0000000..490dbd5
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_666.h
@@ -0,0 +1,98 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * This file was generated by tltgen on Thu Jul  5 15:46:43 2018.
+ * tltgen was created by Pieter Agten (pieter.agten@gmail.com).
+ */
+//#include "output_table.h"
+
+/*
+ * Parameters:
+ * A: -0.000480634
+ * B: 0.00031362
+ * C: -2.03978e-07
+ */
+const temp_entry_t temptable_666[] PROGMEM = {
+  { OV(  1), 794 },
+  { OV( 18), 288 },
+  { OV( 35), 234 },
+  { OV( 52), 207 },
+  { OV( 69), 189 },
+  { OV( 86), 176 },
+  { OV(103), 166 },
+  { OV(120), 157 },
+  { OV(137) ,150 },
+  { OV(154), 144 },
+  { OV(172), 138 },
+  { OV(189), 134 },
+  { OV(206), 129 },
+  { OV(223), 125 },
+  { OV(240), 121 },
+  { OV(257), 118 },
+  { OV(274), 115 },
+  { OV(291), 112 },
+  { OV(308), 109 },
+  { OV(325), 106 },
+  { OV(342), 103 },
+  { OV(359), 101 },
+  { OV(376),  99 },
+  { OV(393),  96 },
+  { OV(410),  94 },
+  { OV(427),  92 },
+  { OV(444),  90 },
+  { OV(461),  88 },
+  { OV(478),  86 },
+  { OV(495),  84 },
+  { OV(512),  82 },
+  { OV(530),  80 },
+  { OV(547),  78 },
+  { OV(564),  76 },
+  { OV(581),  74 },
+  { OV(598),  72 },
+  { OV(615),  70 },
+  { OV(632),  68 },
+  { OV(649),  67 },
+  { OV(666),  65 },
+  { OV(683),  63 },
+  { OV(700),  61 },
+  { OV(717),  59 },
+  { OV(734),  57 },
+  { OV(751),  55 },
+  { OV(768),  53 },
+  { OV(785),  51 },
+  { OV(802),  49 },
+  { OV(819),  47 },
+  { OV(836),  44 },
+  { OV(853),  42 },
+  { OV(871),  39 },
+  { OV(888),  37 },
+  { OV(905),  34 },
+  { OV(922),  30 },
+  { OV(939),  27 },
+  { OV(956),  23 },
+  { OV(973),  18 },
+  { OV(990),  11 },
+  { OV(1007),  2 },
+  { OV(1023),-25 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_67.h b/Marlin/src/module/thermistor/thermistor_67.h
new file mode 100644
index 0000000..7d6d7f6
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_67.h
@@ -0,0 +1,81 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor
+const temp_entry_t temptable_67[] PROGMEM = {
+  { OV(  22 ),  500 },
+  { OV(  23 ),  490 },
+  { OV(  25 ),  480 },
+  { OV(  27 ),  470 },
+  { OV(  29 ),  460 },
+  { OV(  32 ),  450 },
+  { OV(  35 ),  440 },
+  { OV(  38 ),  430 },
+  { OV(  41 ),  420 },
+  { OV(  45 ),  410 },
+  { OV(  50 ),  400 },
+  { OV(  55 ),  390 },
+  { OV(  60 ),  380 },
+  { OV(  67 ),  370 },
+  { OV(  74 ),  360 },
+  { OV(  82 ),  350 },
+  { OV(  91 ),  340 },
+  { OV( 102 ),  330 },
+  { OV( 114 ),  320 },
+  { OV( 127 ),  310 },
+  { OV( 143 ),  300 },
+  { OV( 161 ),  290 },
+  { OV( 181 ),  280 },
+  { OV( 204 ),  270 },
+  { OV( 229 ),  260 },
+  { OV( 259 ),  250 },
+  { OV( 290 ),  240 },
+  { OV( 325 ),  230 },
+  { OV( 364 ),  220 },
+  { OV( 407 ),  210 },
+  { OV( 453 ),  200 },
+  { OV( 501 ),  190 },
+  { OV( 551 ),  180 },
+  { OV( 603 ),  170 },
+  { OV( 655 ),  160 },
+  { OV( 706 ),  150 },
+  { OV( 755 ),  140 },
+  { OV( 801 ),  130 },
+  { OV( 842 ),  120 },
+  { OV( 879 ),  110 },
+  { OV( 910 ),  100 },
+  { OV( 936 ),   90 },
+  { OV( 948 ),   85 },
+  { OV( 958 ),   80 },
+  { OV( 975 ),   70 },
+  { OV( 988 ),   60 },
+  { OV( 998 ),   50 },
+  { OV(1006 ),   40 },
+  { OV(1011 ),   30 },
+  { OV(1013 ),   25 },
+  { OV(1015 ),   20 },
+  { OV(1018 ),   10 },
+  { OV(1020 ),    0 },
+  { OV(1021 ),  -10 },
+  { OV(1022 ),  -20 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_7.h b/Marlin/src/module/thermistor/thermistor_7.h
new file mode 100644
index 0000000..7a73755
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_7.h
@@ -0,0 +1,84 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01
+const temp_entry_t temptable_7[] PROGMEM = {
+  { OV(   1), 941 },
+  { OV(  19), 362 },
+  { OV(  37), 299 }, // top rating 300C
+  { OV(  55), 266 },
+  { OV(  73), 245 },
+  { OV(  91), 229 },
+  { OV( 109), 216 },
+  { OV( 127), 206 },
+  { OV( 145), 197 },
+  { OV( 163), 190 },
+  { OV( 181), 183 },
+  { OV( 199), 177 },
+  { OV( 217), 171 },
+  { OV( 235), 166 },
+  { OV( 253), 162 },
+  { OV( 271), 157 },
+  { OV( 289), 153 },
+  { OV( 307), 149 },
+  { OV( 325), 146 },
+  { OV( 343), 142 },
+  { OV( 361), 139 },
+  { OV( 379), 135 },
+  { OV( 397), 132 },
+  { OV( 415), 129 },
+  { OV( 433), 126 },
+  { OV( 451), 123 },
+  { OV( 469), 121 },
+  { OV( 487), 118 },
+  { OV( 505), 115 },
+  { OV( 523), 112 },
+  { OV( 541), 110 },
+  { OV( 559), 107 },
+  { OV( 577), 105 },
+  { OV( 595), 102 },
+  { OV( 613),  99 },
+  { OV( 631),  97 },
+  { OV( 649),  94 },
+  { OV( 667),  92 },
+  { OV( 685),  89 },
+  { OV( 703),  86 },
+  { OV( 721),  84 },
+  { OV( 739),  81 },
+  { OV( 757),  78 },
+  { OV( 775),  75 },
+  { OV( 793),  72 },
+  { OV( 811),  69 },
+  { OV( 829),  66 },
+  { OV( 847),  62 },
+  { OV( 865),  59 },
+  { OV( 883),  55 },
+  { OV( 901),  51 },
+  { OV( 919),  46 },
+  { OV( 937),  41 },
+  { OV( 955),  35 },
+  { OV( 973),  27 },
+  { OV( 991),  17 },
+  { OV(1009),   1 },
+  { OV(1023),   0 } // to allow internal 0 degrees C
+};
diff --git a/Marlin/src/module/thermistor/thermistor_70.h b/Marlin/src/module/thermistor/thermistor_70.h
new file mode 100644
index 0000000..466b925
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_70.h
@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Stock BQ Hephestos 2 100k thermistor.
+// Created on 29/12/2017 with an ambient temperature of 20C.
+// ANENG AN8009 DMM with a K-type probe used for measurements.
+
+// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, bqh2 stock thermistor
+const temp_entry_t temptable_70[] PROGMEM = {
+  { OV(  18), 270 },
+  { OV(  27), 248 },
+  { OV(  34), 234 },
+  { OV(  45), 220 },
+  { OV(  61), 205 },
+  { OV(  86), 188 },
+  { OV( 123), 172 },
+  { OV( 420), 110 },
+  { OV( 590),  90 },
+  { OV( 845),  56 },
+  { OV( 970),  25 },
+  { OV( 986),  20 },
+  { OV( 994),  15 },
+  { OV(1000),  10 },
+  { OV(1005),   5 },
+  { OV(1009),   0 } // safety
+};
diff --git a/Marlin/src/module/thermistor/thermistor_71.h b/Marlin/src/module/thermistor/thermistor_71.h
new file mode 100644
index 0000000..abd7fc5
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_71.h
@@ -0,0 +1,94 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAF-J01
+// R0 = 100000 Ohm
+// T0 = 25 °C
+// Beta = 3974
+// R1 = 0 Ohm
+// R2 = 4700 Ohm
+const temp_entry_t temptable_71[] PROGMEM = {
+  { OV(  35), 300 },
+  { OV(  51), 269 },
+  { OV(  59), 258 },
+  { OV(  64), 252 },
+  { OV(  71), 244 },
+  { OV(  81), 235 },
+  { OV(  87), 230 },
+  { OV(  92), 226 },
+  { OV( 102), 219 },
+  { OV( 110), 214 },
+  { OV( 115), 211 },
+  { OV( 126), 205 },
+  { OV( 128), 204 },
+  { OV( 130), 203 },
+  { OV( 132), 202 },
+  { OV( 134), 201 },
+  { OV( 136), 200 },
+  { OV( 147), 195 },
+  { OV( 154), 192 },
+  { OV( 159), 190 },
+  { OV( 164), 188 },
+  { OV( 172), 185 },
+  { OV( 175), 184 },
+  { OV( 178), 183 },
+  { OV( 181), 182 },
+  { OV( 184), 181 },
+  { OV( 187), 180 },
+  { OV( 190), 179 },
+  { OV( 193), 178 },
+  { OV( 196), 177 },
+  { OV( 199), 176 },
+  { OV( 202), 175 },
+  { OV( 205), 174 },
+  { OV( 208), 173 },
+  { OV( 215), 171 },
+  { OV( 237), 165 },
+  { OV( 256), 160 },
+  { OV( 300), 150 },
+  { OV( 351), 140 },
+  { OV( 470), 120 },
+  { OV( 504), 115 },
+  { OV( 538), 110 },
+  { OV( 745),  80 },
+  { OV( 770),  76 },
+  { OV( 806),  70 },
+  { OV( 829),  66 },
+  { OV( 860),  60 },
+  { OV( 879),  56 },
+  { OV( 888),  54 },
+  { OV( 905),  50 },
+  { OV( 924),  45 },
+  { OV( 940),  40 },
+  { OV( 955),  35 },
+  { OV( 972),  28 },
+  { OV( 974),  27 },
+  { OV( 976),  26 },
+  { OV( 978),  25 },
+  { OV( 980),  24 },
+  { OV( 987),  20 },
+  { OV( 995),  15 },
+  { OV(1001),  10 },
+  { OV(1006),   5 },
+  { OV(1010),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_75.h b/Marlin/src/module/thermistor/thermistor_75.h
new file mode 100644
index 0000000..79800d2
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_75.h
@@ -0,0 +1,80 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up,
+ * Generic Silicon Heat Pad with NTC 100K thermistor
+ *
+ * Many generic silicone heat pads use the MGB18-104F39050L32 thermistor, applicable to various
+ * wattages and voltages. This table is correct if this part is used. It's been optimized
+ * to provide good granularity in the 60-110C range, good for PLA and ABS. For higher temperature
+ * filament (e.g., nylon) uncomment HIGH_TEMP_RANGE_75 for increased accuracy. If higher
+ * temperatures aren't used it can improve performance slightly to leave it commented out.
+ */
+
+//#define HIGH_TEMP_RANGE_75
+
+const temp_entry_t temptable_75[] PROGMEM = { // Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
+  { OV(111.06), 200 }, // v=0.542 r=571.747 res=0.501 degC/count
+
+  #ifdef HIGH_TEMP_RANGE_75
+    { OV(174.87), 175 }, // v=0.854 r=967.950 res=0.311 degC/count  These values are valid.  But they serve no
+    { OV(191.64), 170 }, // v=0.936 r=1082.139 res=0.284 degC/count  purpose.  It is better to delete them so
+    { OV(209.99), 165 }, // v=1.025 r=1212.472 res=0.260 degC/count  the search is quicker and get to the meaningful
+    { OV(230.02), 160 }, // v=1.123 r=1361.590 res=0.239 degC/count  part of the table sooner.
+    { OV(251.80), 155 }, // v=1.230 r=1532.621 res=0.220 degC/count
+  #endif
+
+  { OV(275.43), 150 }, // v=1.345 r=1729.283 res=0.203 degC/count
+
+  #ifdef HIGH_TEMP_RANGE_75
+    { OV(300.92), 145 }, // v=1.469 r=1956.004 res=0.189 degC/coun
+  #endif
+
+  { OV( 328.32), 140 }, // v=1.603 r=2218.081 res=0.176 degC/count
+  { OV( 388.65), 130 }, // v=1.898 r=2874.980 res=0.156 degC/count
+  { OV( 421.39), 125 }, // v=2.058 r=3286.644 res=0.149 degC/count
+  { OV( 455.65), 120 }, // v=2.225 r=3768.002 res=0.143 degC/count
+  { OV( 491.17), 115 }, // v=2.398 r=4332.590 res=0.139 degC/count
+  { OV( 527.68), 110 }, // v=2.577 r=4996.905 res=0.136 degC/count
+  { OV( 564.81), 105 }, // v=2.758 r=5781.120 res=0.134 degC/count
+  { OV( 602.19), 100 }, // v=2.940 r=6710.000 res=0.134 degC/count
+  { OV( 676.03),  90 }, // v=3.301 r=9131.018 res=0.138 degC/count
+  { OV( 745.85),  80 }, // v=3.642 r=12602.693 res=0.150 degC/count
+  { OV( 778.31),  75 }, // v=3.800 r=14889.001 res=0.159 degC/count
+  { OV( 808.75),  70 }, // v=3.949 r=17658.700 res=0.171 degC/count
+  { OV( 836.94),  65 }, // v=4.087 r=21028.040 res=0.185 degC/count
+  { OV( 862.74),  60 }, // v=4.213 r=25144.568 res=0.204 degC/count
+  { OV( 886.08),  55 }, // v=4.327 r=30196.449 res=0.227 degC/count
+  { OV( 906.97),  50 }, // v=4.429 r=36424.838 res=0.255 degC/count
+  { OV( 941.65),  40 }, // v=4.598 r=53745.337 res=0.333 degC/count
+  { OV( 967.76),  30 }, // v=4.725 r=80880.630 res=0.452 degC/count
+  { OV( 978.03),  25 }, // v=4.776 r=100000.000 res=0.535 degC/count
+  { OV( 981.68),  23 }, // v=4.793 r=109024.395 res=0.573 degC/count
+  { OV( 983.41),  22 }, // v=4.802 r=113875.430 res=0.594 degC/count
+  { OV( 985.08),  21 }, // v=4.810 r=118968.955 res=0.616 degC/count
+  { OV( 986.70),  20 }, // v=4.818 r=124318.354 res=0.638 degC/count
+  { OV( 993.94),  15 }, // v=4.853 r=155431.302 res=0.768 degC/count
+  { OV( 999.96),  10 }, // v=4.883 r=195480.023 res=0.934 degC/count
+  { OV(1008.95),   0 }  // v=4.926 r=314997.575 res=1.418 degC/count
+};
diff --git a/Marlin/src/module/thermistor/thermistor_8.h b/Marlin/src/module/thermistor/thermistor_8.h
new file mode 100644
index 0000000..9e19168
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_8.h
@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3950 K, 10 kOhm pull-up, NTCS0603E3104FHT
+const temp_entry_t temptable_8[] PROGMEM = {
+  { OV(   1), 704 },
+  { OV(  54), 216 },
+  { OV( 107), 175 },
+  { OV( 160), 152 },
+  { OV( 213), 137 },
+  { OV( 266), 125 },
+  { OV( 319), 115 },
+  { OV( 372), 106 },
+  { OV( 425),  99 },
+  { OV( 478),  91 },
+  { OV( 531),  85 },
+  { OV( 584),  78 },
+  { OV( 637),  71 },
+  { OV( 690),  65 },
+  { OV( 743),  58 },
+  { OV( 796),  50 },
+  { OV( 849),  42 },
+  { OV( 902),  31 },
+  { OV( 955),  17 },
+  { OV(1008),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_9.h b/Marlin/src/module/thermistor/thermistor_9.h
new file mode 100644
index 0000000..2909742
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_9.h
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, GE Sensing AL03006-58.2K-97-G1
+const temp_entry_t temptable_9[] PROGMEM = {
+  { OV(   1), 936 },
+  { OV(  36), 300 },
+  { OV(  71), 246 },
+  { OV( 106), 218 },
+  { OV( 141), 199 },
+  { OV( 176), 185 },
+  { OV( 211), 173 },
+  { OV( 246), 163 },
+  { OV( 281), 155 },
+  { OV( 316), 147 },
+  { OV( 351), 140 },
+  { OV( 386), 134 },
+  { OV( 421), 128 },
+  { OV( 456), 122 },
+  { OV( 491), 117 },
+  { OV( 526), 112 },
+  { OV( 561), 107 },
+  { OV( 596), 102 },
+  { OV( 631),  97 },
+  { OV( 666),  92 },
+  { OV( 701),  87 },
+  { OV( 736),  81 },
+  { OV( 771),  76 },
+  { OV( 806),  70 },
+  { OV( 841),  63 },
+  { OV( 876),  56 },
+  { OV( 911),  48 },
+  { OV( 946),  38 },
+  { OV( 981),  23 },
+  { OV(1005),   5 },
+  { OV(1016),   0 }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_99.h b/Marlin/src/module/thermistor/thermistor_99.h
new file mode 100644
index 0000000..839a511
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_99.h
@@ -0,0 +1,64 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#pragma once
+
+// 100k bed thermistor with a 10K pull-up resistor - made by $ buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000
+
+const temp_entry_t temptable_99[] PROGMEM = {
+  { OV(  5.81), 350 }, // v=0.028   r=    57.081  res=13.433 degC/count
+  { OV(  6.54), 340 }, // v=0.032   r=    64.248  res=11.711 degC/count
+  { OV(  7.38), 330 }, // v=0.036   r=    72.588  res=10.161 degC/count
+  { OV(  8.36), 320 }, // v=0.041   r=    82.336  res= 8.772 degC/count
+  { OV(  9.51), 310 }, // v=0.046   r=    93.780  res= 7.535 degC/count
+  { OV( 10.87), 300 }, // v=0.053   r=   107.281  res= 6.439 degC/count
+  { OV( 12.47), 290 }, // v=0.061   r=   123.286  res= 5.473 degC/count
+  { OV( 14.37), 280 }, // v=0.070   r=   142.360  res= 4.627 degC/count
+  { OV( 16.64), 270 }, // v=0.081   r=   165.215  res= 3.891 degC/count
+  { OV( 19.37), 260 }, // v=0.095   r=   192.758  res= 3.253 degC/count
+  { OV( 22.65), 250 }, // v=0.111   r=   226.150  res= 2.705 degC/count
+  { OV( 26.62), 240 }, // v=0.130   r=   266.891  res= 2.236 degC/count
+  { OV( 31.46), 230 }, // v=0.154   r=   316.931  res= 1.839 degC/count
+  { OV( 37.38), 220 }, // v=0.182   r=   378.822  res= 1.504 degC/count
+  { OV( 44.65), 210 }, // v=0.218   r=   455.939  res= 1.224 degC/count
+  { OV( 53.64), 200 }, // v=0.262   r=   552.778  res= 0.991 degC/count
+  { OV( 64.78), 190 }, // v=0.316   r=   675.386  res= 0.799 degC/count
+  { OV( 78.65), 180 }, // v=0.384   r=   831.973  res= 0.643 degC/count
+  { OV( 95.94), 170 }, // v=0.468   r=  1033.801  res= 0.516 degC/count
+  { OV(117.52), 160 }, // v=0.574   r=  1296.481  res= 0.414 degC/count
+  { OV(144.42), 150 }, // v=0.705   r=  1641.900  res= 0.333 degC/count
+  { OV(177.80), 140 }, // v=0.868   r=  2101.110  res= 0.269 degC/count
+  { OV(218.89), 130 }, // v=1.069   r=  2718.725  res= 0.220 degC/count
+  { OV(268.82), 120 }, // v=1.313   r=  3559.702  res= 0.183 degC/count
+  { OV(328.35), 110 }, // v=1.603   r=  4719.968  res= 0.155 degC/count
+  { OV(397.44), 100 }, // v=1.941   r=  6343.323  res= 0.136 degC/count
+  { OV(474.90),  90 }, // v=2.319   r=  8648.807  res= 0.124 degC/count
+  { OV(558.03),  80 }, // v=2.725   r= 11975.779  res= 0.118 degC/count
+  { OV(642.76),  70 }, // v=3.138   r= 16859.622  res= 0.119 degC/count
+  { OV(724.25),  60 }, // v=3.536   r= 24161.472  res= 0.128 degC/count
+  { OV(797.93),  50 }, // v=3.896   r= 35295.361  res= 0.146 degC/count
+  { OV(860.51),  40 }, // v=4.202   r= 52635.209  res= 0.178 degC/count
+  { OV(910.55),  30 }, // v=4.446   r= 80262.251  res= 0.229 degC/count
+  { OV(948.36),  20 }, // v=4.631   r=125374.433  res= 0.313 degC/count
+  { OV(975.47),  10 }, // v=4.763   r=201020.458  res= 0.449 degC/count
+  { OV(994.02),   0 }  // v=4.854   r=331567.870  res= 0.676 degC/count
+};
diff --git a/Marlin/src/module/thermistor/thermistor_998.h b/Marlin/src/module/thermistor/thermistor_998.h
new file mode 100644
index 0000000..e4cfbba
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_998.h
@@ -0,0 +1,33 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// User-defined table 1
+// Dummy Thermistor table.. It will ALWAYS read a fixed value.
+#ifndef DUMMY_THERMISTOR_998_VALUE
+  #define DUMMY_THERMISTOR_998_VALUE 25
+#endif
+
+const temp_entry_t temptable_998[] PROGMEM = {
+  { OV(   1), DUMMY_THERMISTOR_998_VALUE },
+  { OV(1023), DUMMY_THERMISTOR_998_VALUE }
+};
diff --git a/Marlin/src/module/thermistor/thermistor_999.h b/Marlin/src/module/thermistor/thermistor_999.h
new file mode 100644
index 0000000..0271c47
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_999.h
@@ -0,0 +1,33 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// User-defined table 2
+// Dummy Thermistor table.. It will ALWAYS read a fixed value.
+#ifndef DUMMY_THERMISTOR_999_VALUE
+  #define DUMMY_THERMISTOR_999_VALUE 25
+#endif
+
+const temp_entry_t temptable_999[] PROGMEM = {
+  { OV(   1), DUMMY_THERMISTOR_999_VALUE },
+  { OV(1023), DUMMY_THERMISTOR_999_VALUE }
+};
diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h
new file mode 100644
index 0000000..03ed5c2
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistors.h
@@ -0,0 +1,507 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../inc/MarlinConfig.h"
+
+#define THERMISTOR_TABLE_ADC_RESOLUTION 10
+#define THERMISTOR_TABLE_SCALE (HAL_ADC_RANGE / _BV(THERMISTOR_TABLE_ADC_RESOLUTION))
+#if ENABLED(HAL_ADC_FILTERED)
+  #define OVERSAMPLENR 1
+#elif HAL_ADC_RESOLUTION > 10
+  #define OVERSAMPLENR (20 - HAL_ADC_RESOLUTION)
+#else
+  #define OVERSAMPLENR 16
+#endif
+#define MAX_RAW_THERMISTOR_VALUE (HAL_ADC_RANGE * (OVERSAMPLENR) - 1)
+
+// Currently Marlin stores all oversampled ADC values as int16_t, make sure the HAL settings do not overflow 15bit
+#if MAX_RAW_THERMISTOR_VALUE > ((1 << 15) - 1)
+  #error "MAX_RAW_THERMISTOR_VALUE is too large for int16_t. Reduce OVERSAMPLENR or HAL_ADC_RESOLUTION."
+#endif
+
+#define OV_SCALE(N) (N)
+#define OV(N) int16_t(OV_SCALE(N) * (OVERSAMPLENR) * (THERMISTOR_TABLE_SCALE))
+
+#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTOR_HEATER_6 == n || THERMISTOR_HEATER_7 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n)
+
+typedef struct { int16_t value, celsius; } temp_entry_t;
+
+// Pt1000 and Pt100 handling
+//
+// Rt=R0*(1+a*T+b*T*T) [for T>0]
+// a=3.9083E-3, b=-5.775E-7
+#define PtA 3.9083E-3
+#define PtB -5.775E-7
+#define PtRt(T,R0) ((R0) * (1.0 + (PtA) * (T) + (PtB) * (T) * (T)))
+#define PtAdVal(T,R0,Rup) (short)(1024 / (Rup / PtRt(T, R0) + 1))
+#define PtLine(T,R0,Rup) { OV(PtAdVal(T, R0, Rup)), T }
+
+#if ANY_THERMISTOR_IS(1) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "EPCOS"
+  #include "thermistor_1.h"
+#endif
+#if ANY_THERMISTOR_IS(2) // 4338 K, R25 = 200 kOhm, Pull-up = 4.7 kOhm, "ATC Semitec 204GT-2"
+  #include "thermistor_2.h"
+#endif
+#if ANY_THERMISTOR_IS(3) // beta25 = 4120 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Mendel-parts"
+  #include "thermistor_3.h"
+#endif
+#if ANY_THERMISTOR_IS(4) // beta25 = 3950 K, R25 = 10 kOhm, Pull-up = 4.7 kOhm, "Generic"
+  #include "thermistor_4.h"
+#endif
+#if ANY_THERMISTOR_IS(5) // beta25 = 4267 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "ParCan, ATC 104GT-2"
+  #include "thermistor_5.h"
+#endif
+#if ANY_THERMISTOR_IS(501) // 100K Zonestar thermistor
+  #include "thermistor_501.h"
+#endif
+#if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Průša P802M hot bed
+  #include "thermistor_502.h"
+#endif
+#if ANY_THERMISTOR_IS(503) // Zonestar (Z8XM2) Heated Bed thermistor
+  #include "thermistor_503.h"
+#endif
+#if ANY_THERMISTOR_IS(512) // 100k thermistor in RPW-Ultra hotend, Pull-up = 4.7 kOhm, "unknown model"
+  #include "thermistor_512.h"
+#endif
+#if ANY_THERMISTOR_IS(6) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 8.2 kOhm, "EPCOS ?"
+  #include "thermistor_6.h"
+#endif
+#if ANY_THERMISTOR_IS(7) // beta25 = 3974 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Honeywell 135-104LAG-J01"
+  #include "thermistor_7.h"
+#endif
+#if ANY_THERMISTOR_IS(71) // beta25 = 3974 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Honeywell 135-104LAF-J01"
+  #include "thermistor_71.h"
+#endif
+#if ANY_THERMISTOR_IS(8) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 10 kOhm, "Vishay E3104FHT"
+  #include "thermistor_8.h"
+#endif
+#if ANY_THERMISTOR_IS(9) // beta25 = 3960 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "GE Sensing AL03006-58.2K-97-G1"
+  #include "thermistor_9.h"
+#endif
+#if ANY_THERMISTOR_IS(10) // beta25 = 3960 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "RS 198-961"
+  #include "thermistor_10.h"
+#endif
+#if ANY_THERMISTOR_IS(11) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "QU-BD silicone bed, QWG-104F-3950"
+  #include "thermistor_11.h"
+#endif
+#if ANY_THERMISTOR_IS(13) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hisens"
+  #include "thermistor_13.h"
+#endif
+#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration
+  #include "thermistor_15.h"
+#endif
+#if ANY_THERMISTOR_IS(17) // Dagoma NTC 100k white thermistor
+  #include "thermistor_17.h"
+#endif
+#if ANY_THERMISTOR_IS(18) // ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
+  #include "thermistor_18.h"
+#endif
+#if ANY_THERMISTOR_IS(20) // Pt100 with INA826 amp on Ultimaker v2.0 electronics
+  #include "thermistor_20.h"
+#endif
+#if ANY_THERMISTOR_IS(21) // Pt100 with INA826 amp with 3.3v excitation based on "Pt100 with INA826 amp on Ultimaker v2.0 electronics"
+  #include "thermistor_21.h"
+#endif
+#if ANY_THERMISTOR_IS(22) // Thermistor in a Rostock 301 hot end, calibrated with a multimeter
+  #include "thermistor_22.h"
+#endif
+#if ANY_THERMISTOR_IS(23) // By AluOne #12622. Formerly 22 above. May need calibration/checking.
+  #include "thermistor_23.h"
+#endif
+#if ANY_THERMISTOR_IS(30) // Kis3d Silicone mat 24V 200W/300W with 6mm Precision cast plate (EN AW 5083)
+  #include "thermistor_30.h"
+#endif
+#if ANY_THERMISTOR_IS(51) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "EPCOS"
+  #include "thermistor_51.h"
+#endif
+#if ANY_THERMISTOR_IS(52) // beta25 = 4338 K, R25 = 200 kOhm, Pull-up = 1 kOhm, "ATC Semitec 204GT-2"
+  #include "thermistor_52.h"
+#endif
+#if ANY_THERMISTOR_IS(55) // beta25 = 4267 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "ATC Semitec 104GT-2 (Used on ParCan)"
+  #include "thermistor_55.h"
+#endif
+#if ANY_THERMISTOR_IS(60) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Maker's Tool Works Kapton Bed"
+  #include "thermistor_60.h"
+#endif
+#if ANY_THERMISTOR_IS(61) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Formbot 350°C Thermistor"
+  #include "thermistor_61.h"
+#endif
+#if ANY_THERMISTOR_IS(66) // beta25 = 4500 K, R25 = 2.5 MOhm, Pull-up = 4.7 kOhm, "DyzeDesign 500 °C Thermistor"
+  #include "thermistor_66.h"
+#endif
+#if ANY_THERMISTOR_IS(67) // R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor
+  #include "thermistor_67.h"
+#endif
+#if ANY_THERMISTOR_IS(12) // beta25 = 4700 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Personal calibration for Makibox hot bed"
+  #include "thermistor_12.h"
+#endif
+#if ANY_THERMISTOR_IS(70) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hephestos 2, bqh2 stock thermistor"
+  #include "thermistor_70.h"
+#endif
+#if ANY_THERMISTOR_IS(75) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "MGB18-104F39050L32 thermistor"
+  #include "thermistor_75.h"
+#endif
+#if ANY_THERMISTOR_IS(99) // 100k bed thermistor with a 10K pull-up resistor (on some Wanhao i3 models)
+  #include "thermistor_99.h"
+#endif
+#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
+  #include "thermistor_110.h"
+#endif
+#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
+  #include "thermistor_147.h"
+#endif
+#if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord
+  #include "thermistor_201.h"
+#endif
+#if ANY_THERMISTOR_IS(202) // 200K thermistor in Copymaker3D hotend
+  #include "thermistor_202.h"
+#endif
+#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage for MEGA
+  #include "thermistor_331.h"
+#endif
+#if ANY_THERMISTOR_IS(332) // Like table 1, but with 3V3 as input voltage for DUE
+  #include "thermistor_332.h"
+#endif
+#if ANY_THERMISTOR_IS(666) // beta25 = UNK, R25 = 200K, Pull-up = 10 kOhm, "Unidentified 200K NTC thermistor (Einstart S)"
+  #include "thermistor_666.h"
+#endif
+#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
+  #include "thermistor_1010.h"
+#endif
+#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
+  #include "thermistor_1047.h"
+#endif
+#if ANY_THERMISTOR_IS(998) // User-defined table 1
+  #include "thermistor_998.h"
+#endif
+#if ANY_THERMISTOR_IS(999) // User-defined table 2
+  #include "thermistor_999.h"
+#endif
+#if ANY_THERMISTOR_IS(1000) // Custom
+  const temp_entry_t temptable_1000[] PROGMEM = { { 0, 0 } };
+#endif
+
+#define _TT_NAME(_N) temptable_ ## _N
+#define TT_NAME(_N) _TT_NAME(_N)
+
+
+#if THERMISTOR_HEATER_0
+  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTOR_HEATER_0)
+  #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
+#elif HEATER_0_USES_THERMISTOR
+  #error "No heater 0 thermistor table specified"
+#else
+  #define HEATER_0_TEMPTABLE nullptr
+  #define HEATER_0_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_1
+  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTOR_HEATER_1)
+  #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
+#elif HEATER_1_USES_THERMISTOR
+  #error "No heater 1 thermistor table specified"
+#else
+  #define HEATER_1_TEMPTABLE nullptr
+  #define HEATER_1_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_2
+  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTOR_HEATER_2)
+  #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
+#elif HEATER_2_USES_THERMISTOR
+  #error "No heater 2 thermistor table specified"
+#else
+  #define HEATER_2_TEMPTABLE nullptr
+  #define HEATER_2_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_3
+  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTOR_HEATER_3)
+  #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
+#elif HEATER_3_USES_THERMISTOR
+  #error "No heater 3 thermistor table specified"
+#else
+  #define HEATER_3_TEMPTABLE nullptr
+  #define HEATER_3_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_4
+  #define HEATER_4_TEMPTABLE TT_NAME(THERMISTOR_HEATER_4)
+  #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
+#elif HEATER_4_USES_THERMISTOR
+  #error "No heater 4 thermistor table specified"
+#else
+  #define HEATER_4_TEMPTABLE nullptr
+  #define HEATER_4_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_5
+  #define HEATER_5_TEMPTABLE TT_NAME(THERMISTOR_HEATER_5)
+  #define HEATER_5_TEMPTABLE_LEN COUNT(HEATER_5_TEMPTABLE)
+#elif HEATER_5_USES_THERMISTOR
+  #error "No heater 5 thermistor table specified"
+#else
+  #define HEATER_5_TEMPTABLE nullptr
+  #define HEATER_5_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_6
+  #define HEATER_6_TEMPTABLE TT_NAME(THERMISTOR_HEATER_6)
+  #define HEATER_6_TEMPTABLE_LEN COUNT(HEATER_6_TEMPTABLE)
+#elif HEATER_6_USES_THERMISTOR
+  #error "No heater 6 thermistor table specified"
+#else
+  #define HEATER_6_TEMPTABLE nullptr
+  #define HEATER_6_TEMPTABLE_LEN 0
+#endif
+
+#if THERMISTOR_HEATER_7
+  #define HEATER_7_TEMPTABLE TT_NAME(THERMISTOR_HEATER_7)
+  #define HEATER_7_TEMPTABLE_LEN COUNT(HEATER_7_TEMPTABLE)
+#elif HEATER_7_USES_THERMISTOR
+  #error "No heater 7 thermistor table specified"
+#else
+  #define HEATER_7_TEMPTABLE nullptr
+  #define HEATER_7_TEMPTABLE_LEN 0
+#endif
+
+#ifdef THERMISTORBED
+  #define BED_TEMPTABLE TT_NAME(THERMISTORBED)
+  #define BED_TEMPTABLE_LEN COUNT(BED_TEMPTABLE)
+#elif HEATER_BED_USES_THERMISTOR
+  #error "No bed thermistor table specified"
+#else
+  #define BED_TEMPTABLE_LEN 0
+#endif
+
+#ifdef THERMISTORCHAMBER
+  #define CHAMBER_TEMPTABLE TT_NAME(THERMISTORCHAMBER)
+  #define CHAMBER_TEMPTABLE_LEN COUNT(CHAMBER_TEMPTABLE)
+#elif HEATER_CHAMBER_USES_THERMISTOR
+  #error "No chamber thermistor table specified"
+#else
+  #define CHAMBER_TEMPTABLE_LEN 0
+#endif
+
+#ifdef THERMISTORPROBE
+  #define PROBE_TEMPTABLE TT_NAME(THERMISTORPROBE)
+  #define PROBE_TEMPTABLE_LEN COUNT(PROBE_TEMPTABLE)
+#elif HEATER_PROBE_USES_THERMISTOR
+  #error "No probe thermistor table specified"
+#else
+  #define PROBE_TEMPTABLE_LEN 0
+#endif
+
+// The SCAN_THERMISTOR_TABLE macro needs alteration?
+static_assert(
+     HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256
+  && HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256
+  && HEATER_4_TEMPTABLE_LEN < 256 && HEATER_5_TEMPTABLE_LEN < 256
+  && HEATER_6_TEMPTABLE_LEN < 256 && HEATER_7_TEMPTABLE_LEN < 256
+  &&      BED_TEMPTABLE_LEN < 256 &&  CHAMBER_TEMPTABLE_LEN < 256
+  &&    PROBE_TEMPTABLE_LEN < 256,
+  "Temperature conversion tables over 255 entries need special consideration."
+);
+
+// Set the high and low raw values for the heaters
+// For thermistors the highest temperature results in the lowest ADC value
+// For thermocouples the highest temperature results in the highest ADC value
+
+#define _TT_REV(N) REVERSE_TEMP_SENSOR_RANGE_##N
+#define TT_REV(N) _TT_REV(N)
+
+#ifdef HEATER_0_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_0)
+    #define HEATER_0_SENSOR_MINTEMP_IND 0
+    #define HEATER_0_SENSOR_MAXTEMP_IND HEATER_0_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_0_SENSOR_MINTEMP_IND HEATER_0_TEMPTABLE_LEN - 1
+    #define HEATER_0_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_1_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_1)
+    #define HEATER_1_SENSOR_MINTEMP_IND 0
+    #define HEATER_1_SENSOR_MAXTEMP_IND HEATER_1_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_1_SENSOR_MINTEMP_IND HEATER_1_TEMPTABLE_LEN - 1
+    #define HEATER_1_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_2_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_2)
+    #define HEATER_2_SENSOR_MINTEMP_IND 0
+    #define HEATER_2_SENSOR_MAXTEMP_IND HEATER_2_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_2_SENSOR_MINTEMP_IND HEATER_2_TEMPTABLE_LEN - 1
+    #define HEATER_2_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_3_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_3)
+    #define HEATER_3_SENSOR_MINTEMP_IND 0
+    #define HEATER_3_SENSOR_MAXTEMP_IND HEATER_3_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_3_SENSOR_MINTEMP_IND HEATER_3_TEMPTABLE_LEN - 1
+    #define HEATER_3_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_4_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_4)
+    #define HEATER_4_SENSOR_MINTEMP_IND 0
+    #define HEATER_4_SENSOR_MAXTEMP_IND HEATER_4_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_4_SENSOR_MINTEMP_IND HEATER_4_TEMPTABLE_LEN - 1
+    #define HEATER_4_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_5_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_5)
+    #define HEATER_5_SENSOR_MINTEMP_IND 0
+    #define HEATER_5_SENSOR_MAXTEMP_IND HEATER_5_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_5_SENSOR_MINTEMP_IND HEATER_5_TEMPTABLE_LEN - 1
+    #define HEATER_5_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_6_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_6)
+    #define HEATER_6_SENSOR_MINTEMP_IND 0
+    #define HEATER_6_SENSOR_MAXTEMP_IND HEATER_6_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_6_SENSOR_MINTEMP_IND HEATER_6_TEMPTABLE_LEN - 1
+    #define HEATER_6_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+#ifdef HEATER_7_TEMPTABLE
+  #if TT_REV(THERMISTOR_HEATER_7)
+    #define HEATER_7_SENSOR_MINTEMP_IND 0
+    #define HEATER_7_SENSOR_MAXTEMP_IND HEATER_7_TEMPTABLE_LEN - 1
+  #else
+    #define HEATER_7_SENSOR_MINTEMP_IND HEATER_7_TEMPTABLE_LEN - 1
+    #define HEATER_7_SENSOR_MAXTEMP_IND 0
+  #endif
+#endif
+
+#ifndef HEATER_0_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_0) || !HEATER_0_USES_THERMISTOR
+    #define HEATER_0_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_0_RAW_LO_TEMP 0
+  #else
+    #define HEATER_0_RAW_HI_TEMP 0
+    #define HEATER_0_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_1_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_1) || !HEATER_1_USES_THERMISTOR
+    #define HEATER_1_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_1_RAW_LO_TEMP 0
+  #else
+    #define HEATER_1_RAW_HI_TEMP 0
+    #define HEATER_1_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_2_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_2) || !HEATER_2_USES_THERMISTOR
+    #define HEATER_2_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_2_RAW_LO_TEMP 0
+  #else
+    #define HEATER_2_RAW_HI_TEMP 0
+    #define HEATER_2_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_3_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_3) || !HEATER_3_USES_THERMISTOR
+    #define HEATER_3_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_3_RAW_LO_TEMP 0
+  #else
+    #define HEATER_3_RAW_HI_TEMP 0
+    #define HEATER_3_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_4_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_4) || !HEATER_4_USES_THERMISTOR
+    #define HEATER_4_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_4_RAW_LO_TEMP 0
+  #else
+    #define HEATER_4_RAW_HI_TEMP 0
+    #define HEATER_4_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_5_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_5) || !HEATER_5_USES_THERMISTOR
+    #define HEATER_5_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_5_RAW_LO_TEMP 0
+  #else
+    #define HEATER_5_RAW_HI_TEMP 0
+    #define HEATER_5_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_6_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_6) || !HEATER_6_USES_THERMISTOR
+    #define HEATER_6_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_6_RAW_LO_TEMP 0
+  #else
+    #define HEATER_6_RAW_HI_TEMP 0
+    #define HEATER_6_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_7_RAW_HI_TEMP
+  #if TT_REV(THERMISTOR_HEATER_7) || !HEATER_7_USES_THERMISTOR
+    #define HEATER_7_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_7_RAW_LO_TEMP 0
+  #else
+    #define HEATER_7_RAW_HI_TEMP 0
+    #define HEATER_7_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_BED_RAW_HI_TEMP
+  #if TT_REV(THERMISTORBED) || !HEATER_BED_USES_THERMISTOR
+    #define HEATER_BED_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_BED_RAW_LO_TEMP 0
+  #else
+    #define HEATER_BED_RAW_HI_TEMP 0
+    #define HEATER_BED_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_CHAMBER_RAW_HI_TEMP
+  #if TT_REV(THERMISTORCHAMBER) || !HEATER_CHAMBER_USES_THERMISTOR
+    #define HEATER_CHAMBER_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_CHAMBER_RAW_LO_TEMP 0
+  #else
+    #define HEATER_CHAMBER_RAW_HI_TEMP 0
+    #define HEATER_CHAMBER_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+#ifndef HEATER_PROBE_RAW_HI_TEMP
+  #if TT_REV(THERMISTORPROBE) || !HEATER_PROBE_USES_THERMISTOR
+    #define HEATER_PROBE_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
+    #define HEATER_PROBE_RAW_LO_TEMP 0
+  #else
+    #define HEATER_PROBE_RAW_HI_TEMP 0
+    #define HEATER_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
+  #endif
+#endif
+
+#undef _TT_REV
+#undef TT_REV