Initial commit

1 files changed, 635 insertions, 0 deletions

diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
new file mode 100644
index 0000000..ab1446f
--- /dev/null
+++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
@@ -0,0 +1,635 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  RAMPS_14_EFB (Hotend, Fan, Bed)
+ *  RAMPS_14_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_14_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_14_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_14_SF  (Spindle, Controller Fan)
+ *
+ *  RAMPS_13_EFB (Hotend, Fan, Bed)
+ *  RAMPS_13_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_13_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_13_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_13_SF  (Spindle, Controller Fan)
+ *
+ *  Other pins_MYBOARD.h files may override these defaults
+ *
+ *  Differences between
+ *  RAMPS_13 | RAMPS_14
+ *         7 | 11
+ */
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "RAMPS 1.4"
+#endif
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE              0x1000  // 4KB
+#endif
+
+#define IS_RAMPS_EFB
+
+//
+// Servos
+//
+#ifdef IS_RAMPS_13
+  #define SERVO0_PIN                           7  // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
+#else
+  #define SERVO0_PIN                          11
+#endif
+#define SERVO1_PIN                             6
+#define SERVO2_PIN                             5
+#ifndef SERVO3_PIN
+  #define SERVO3_PIN                           4
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                              3
+#ifndef X_MAX_PIN
+  #define X_MAX_PIN                            2
+#endif
+#define Y_MIN_PIN                             14
+#define Y_MAX_PIN                             15
+#define Z_MIN_PIN                             18
+#define Z_MAX_PIN                             19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     32
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+#ifndef X_CS_PIN
+  #define X_CS_PIN                            53
+#endif
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                            49
+#endif
+
+#define Z_STEP_PIN                            46
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          62
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                            40
+#endif
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                           42
+#endif
+
+#define E1_STEP_PIN                           36
+#define E1_DIR_PIN                            34
+#define E1_ENABLE_PIN                         30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                           44
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input
+#define TEMP_1_PIN                             1  // Analog Input
+#define TEMP_BED_PIN                           2  // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN                      66  // Don't use 53 if using Display/SD card
+#else
+  #define MAX6675_SS_PIN                      66  // Don't use 49 (SD_DETECT_PIN)
+#endif
+
+//
+// Augmentation for auto-assigning RAMPS plugs
+//
+#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
+  #if HAS_MULTI_HOTEND
+    #if TEMP_SENSOR_BED
+      #define IS_RAMPS_EEB
+    #else
+      #define IS_RAMPS_EEF
+    #endif
+  #elif TEMP_SENSOR_BED
+    #define IS_RAMPS_EFB
+  #else
+    #define IS_RAMPS_EFF
+  #endif
+#endif
+
+//
+// Heaters / Fans
+//
+#ifndef MOSFET_D_PIN
+  #define MOSFET_D_PIN                        -1
+#endif
+#ifndef RAMPS_D8_PIN
+  #define RAMPS_D8_PIN                         8
+#endif
+#ifndef RAMPS_D9_PIN
+  #define RAMPS_D9_PIN                         9
+#endif
+#ifndef RAMPS_D10_PIN
+  #define RAMPS_D10_PIN                       10
+#endif
+
+#define HEATER_0_PIN               RAMPS_D10_PIN
+
+#if ENABLED(IS_RAMPS_EFB)                         // Hotend, Fan, Bed
+  #define FAN_PIN                   RAMPS_D9_PIN
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EEF)                       // Hotend, Hotend, Fan
+  #define HEATER_1_PIN              RAMPS_D9_PIN
+  #define FAN_PIN                   RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EEB)                       // Hotend, Hotend, Bed
+  #define HEATER_1_PIN              RAMPS_D9_PIN
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EFF)                       // Hotend, Fan, Fan
+  #define FAN_PIN                   RAMPS_D9_PIN
+  #define FAN1_PIN                  RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_SF)                        // Spindle, Fan
+  #define FAN_PIN                   RAMPS_D8_PIN
+#else                                             // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+  #define FAN_PIN                   RAMPS_D9_PIN
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+  #if HOTENDS == 1
+    #define FAN1_PIN                MOSFET_D_PIN
+  #else
+    #define HEATER_1_PIN            MOSFET_D_PIN
+  #endif
+#endif
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              4  // IO pin. Buffer needed
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         5  // Analog Input on AUX2
+#endif
+
+// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                       4
+#endif
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN                           12
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
+  #if NUM_SERVOS <= 1                             // Prefer the servo connector
+    #define CASE_LIGHT_PIN                     6  // Hardware PWM
+  #elif HAS_FREE_AUX2_PINS                        // try to use AUX 2
+    #define CASE_LIGHT_PIN                    44  // Hardware PWM
+  #endif
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
+  #if !defined(NUM_SERVOS) || NUM_SERVOS == 0     // Prefer the servo connector
+    #define SPINDLE_LASER_ENA_PIN              4  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN              6  // Hardware PWM
+    #define SPINDLE_DIR_PIN                    5
+  #elif HAS_FREE_AUX2_PINS                        // try to use AUX 2
+    #define SPINDLE_LASER_ENA_PIN             40  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN             44  // Hardware PWM
+    #define SPINDLE_DIR_PIN                   65
+  #endif
+#endif
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#ifndef E_MUX0_PIN
+  #define E_MUX0_PIN                          40  // Z_CS_PIN
+#endif
+#ifndef E_MUX1_PIN
+  #define E_MUX1_PIN                          42  // E0_CS_PIN
+#endif
+#ifndef E_MUX2_PIN
+  #define E_MUX2_PIN                          44  // E1_CS_PIN
+#endif
+
+/**
+ * Default pins for TMC software SPI
+ */
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                       66
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                       44
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                        64
+  #endif
+#endif
+
+#if HAS_TMC_UART
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Hardware serial communication ports.
+   * If undefined software serial is used according to the pins below
+   */
+  //#define X_HARDWARE_SERIAL  Serial1
+  //#define X2_HARDWARE_SERIAL Serial1
+  //#define Y_HARDWARE_SERIAL  Serial1
+  //#define Y2_HARDWARE_SERIAL Serial1
+  //#define Z_HARDWARE_SERIAL  Serial1
+  //#define Z2_HARDWARE_SERIAL Serial1
+  //#define E0_HARDWARE_SERIAL Serial1
+  //#define E1_HARDWARE_SERIAL Serial1
+  //#define E2_HARDWARE_SERIAL Serial1
+  //#define E3_HARDWARE_SERIAL Serial1
+  //#define E4_HARDWARE_SERIAL Serial1
+
+  /**
+   * Software serial
+   */
+
+  #ifndef X_SERIAL_TX_PIN
+    #define X_SERIAL_TX_PIN                   40
+  #endif
+  #ifndef X_SERIAL_RX_PIN
+    #define X_SERIAL_RX_PIN                   63
+  #endif
+  #ifndef X2_SERIAL_TX_PIN
+    #define X2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef X2_SERIAL_RX_PIN
+    #define X2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef Y_SERIAL_TX_PIN
+    #define Y_SERIAL_TX_PIN                   59
+  #endif
+  #ifndef Y_SERIAL_RX_PIN
+    #define Y_SERIAL_RX_PIN                   64
+  #endif
+  #ifndef Y2_SERIAL_TX_PIN
+    #define Y2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef Y2_SERIAL_RX_PIN
+    #define Y2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef Z_SERIAL_TX_PIN
+    #define Z_SERIAL_TX_PIN                   42
+  #endif
+  #ifndef Z_SERIAL_RX_PIN
+    #define Z_SERIAL_RX_PIN                   65
+  #endif
+  #ifndef Z2_SERIAL_TX_PIN
+    #define Z2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef Z2_SERIAL_RX_PIN
+    #define Z2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef E0_SERIAL_TX_PIN
+    #define E0_SERIAL_TX_PIN                  44
+  #endif
+  #ifndef E0_SERIAL_RX_PIN
+    #define E0_SERIAL_RX_PIN                  66
+  #endif
+  #ifndef E1_SERIAL_TX_PIN
+    #define E1_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E1_SERIAL_RX_PIN
+    #define E1_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E2_SERIAL_TX_PIN
+    #define E2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E2_SERIAL_RX_PIN
+    #define E2_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E3_SERIAL_TX_PIN
+    #define E3_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E3_SERIAL_RX_PIN
+    #define E3_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E4_SERIAL_TX_PIN
+    #define E4_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E4_SERIAL_RX_PIN
+    #define E4_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E5_SERIAL_TX_PIN
+    #define E5_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E5_SERIAL_RX_PIN
+    #define E5_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E6_SERIAL_TX_PIN
+    #define E6_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E6_SERIAL_RX_PIN
+    #define E6_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E7_SERIAL_TX_PIN
+    #define E7_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E7_SERIAL_RX_PIN
+    #define E7_SERIAL_RX_PIN                  -1
+  #endif
+#endif
+
+//////////////////////////
+// LCDs and Controllers //
+//////////////////////////
+
+#if HAS_WIRED_LCD
+
+  //
+  // LCD Display output pins
+  //
+  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+    #define LCD_PINS_RS                       49  // CS chip select /SS chip slave select
+    #define LCD_PINS_ENABLE                   51  // SID (MOSI)
+    #define LCD_PINS_D4                       52  // SCK (CLK) clock
+
+  #elif BOTH(IS_NEWPANEL, PANEL_ONE)
+
+    #define LCD_PINS_RS                       40
+    #define LCD_PINS_ENABLE                   42
+    #define LCD_PINS_D4                       65
+    #define LCD_PINS_D5                       66
+    #define LCD_PINS_D6                       44
+    #define LCD_PINS_D7                       64
+
+  #else
+
+    #if ENABLED(CR10_STOCKDISPLAY)
+
+      #define LCD_PINS_RS                     27
+      #define LCD_PINS_ENABLE                 29
+      #define LCD_PINS_D4                     25
+
+      #if !IS_NEWPANEL
+        #define BEEPER_PIN                    37
+      #endif
+
+    #elif ENABLED(ZONESTAR_LCD)
+
+      #define LCD_PINS_RS                     64
+      #define LCD_PINS_ENABLE                 44
+      #define LCD_PINS_D4                     63
+      #define LCD_PINS_D5                     40
+      #define LCD_PINS_D6                     42
+      #define LCD_PINS_D7                     65
+
+    #else
+
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
+        #define LCD_PINS_DC                   25  // Set as output on init
+        #define LCD_PINS_RS                   27  // Pull low for 1s to init
+        // DOGM SPI LCD Support
+        #define DOGLCD_CS                     16
+        #define DOGLCD_MOSI                   17
+        #define DOGLCD_SCK                    23
+        #define DOGLCD_A0            LCD_PINS_DC
+      #else
+        #define LCD_PINS_RS                   16
+        #define LCD_PINS_ENABLE               17
+        #define LCD_PINS_D4                   23
+        #define LCD_PINS_D5                   25
+        #define LCD_PINS_D6                   27
+      #endif
+
+      #define LCD_PINS_D7                     29
+
+      #if !IS_NEWPANEL
+        #define BEEPER_PIN                    33
+      #endif
+
+    #endif
+
+    #if !IS_NEWPANEL
+      // Buttons attached to a shift register
+      // Not wired yet
+      //#define SHIFT_CLK_PIN                 38
+      //#define SHIFT_LD_PIN                  42
+      //#define SHIFT_OUT_PIN                 40
+      //#define SHIFT_EN_PIN                  17
+    #endif
+
+  #endif
+
+  //
+  // LCD Display input pins
+  //
+  #if IS_NEWPANEL
+
+    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+      #define BEEPER_PIN                      37
+
+      #if ENABLED(CR10_STOCKDISPLAY)
+        #define BTN_EN1                       17
+        #define BTN_EN2                       23
+      #else
+        #define BTN_EN1                       31
+        #define BTN_EN2                       33
+      #endif
+
+      #define BTN_ENC                         35
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        41
+
+      #if ENABLED(BQ_LCD_SMART_CONTROLLER)
+        #define LCD_BACKLIGHT_PIN             39
+      #endif
+
+    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+      #define BTN_EN1                         64
+      #define BTN_EN2                         59
+      #define BTN_ENC                         63
+      #define SD_DETECT_PIN                   42
+
+    #elif ENABLED(LCD_I2C_PANELOLU2)
+
+      #define BTN_EN1                         47
+      #define BTN_EN2                         43
+      #define BTN_ENC                         32
+      #define LCD_SDSS                      SDSS
+      #define KILL_PIN                        41
+
+    #elif ENABLED(LCD_I2C_VIKI)
+
+      #define BTN_EN1                         22  // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+      #define BTN_EN2                          7  // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
+      #define BTN_ENC                         -1
+
+      #define LCD_SDSS                      SDSS
+      #define SD_DETECT_PIN                   49
+
+    #elif ANY(VIKI2, miniVIKI)
+
+      #define DOGLCD_CS                       45
+      #define DOGLCD_A0                       44
+      #define LCD_SCREEN_ROT_180
+
+      #define BEEPER_PIN                      33
+      #define STAT_LED_RED_PIN                32
+      #define STAT_LED_BLUE_PIN               35
+
+      #define BTN_EN1                         22
+      #define BTN_EN2                          7
+      #define BTN_ENC                         39
+
+      #define SD_DETECT_PIN                   -1  // Pin 49 for display sd interface, 72 for easy adapter board
+      #define KILL_PIN                        31
+
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+      #define DOGLCD_CS                       29
+      #define DOGLCD_A0                       27
+
+      #define BEEPER_PIN                      23
+      #define LCD_BACKLIGHT_PIN               33
+
+      #define BTN_EN1                         35
+      #define BTN_EN2                         37
+      #define BTN_ENC                         31
+
+      #define LCD_SDSS                      SDSS
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        41
+
+    #elif ENABLED(MKS_MINI_12864)
+
+      #define DOGLCD_A0                       27
+      #define DOGLCD_CS                       25
+
+      // GLCD features
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+
+      #define BEEPER_PIN                      37
+      // not connected to a pin
+      #define LCD_BACKLIGHT_PIN               65  // backlight LED on A11/D65
+
+      #define BTN_EN1                         31
+      #define BTN_EN2                         33
+      #define BTN_ENC                         35
+
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        64
+
+    #elif ENABLED(MINIPANEL)
+
+      #define BEEPER_PIN                      42
+      // not connected to a pin
+      #define LCD_BACKLIGHT_PIN               65  // backlight LED on A11/D65
+
+      #define DOGLCD_A0                       44
+      #define DOGLCD_CS                       66
+
+      // GLCD features
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+
+      #define BTN_EN1                         40
+      #define BTN_EN2                         63
+      #define BTN_ENC                         59
+
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        64
+
+    #elif ENABLED(ZONESTAR_LCD)
+
+      #define ADC_KEYPAD_PIN                  12
+
+    #elif ENABLED(AZSMZ_12864)
+
+      // Pins only defined for RAMPS_SMART currently
+
+    #else
+
+      // Beeper on AUX-4
+      #define BEEPER_PIN                      33
+
+      // Buttons are directly attached to AUX-2
+      #if IS_RRW_KEYPAD
+        #define SHIFT_OUT_PIN                 40
+        #define SHIFT_CLK_PIN                 44
+        #define SHIFT_LD_PIN                  42
+        #define BTN_EN1                       64
+        #define BTN_EN2                       59
+        #define BTN_ENC                       63
+      #elif ENABLED(PANEL_ONE)
+        #define BTN_EN1                       59  // AUX2 PIN 3
+        #define BTN_EN2                       63  // AUX2 PIN 4
+        #define BTN_ENC                       49  // AUX3 PIN 7
+      #else
+        #define BTN_EN1                       37
+        #define BTN_EN2                       35
+        #define BTN_ENC                       31
+      #endif
+
+      #if ENABLED(G3D_PANEL)
+        #define SD_DETECT_PIN                 49
+        #define KILL_PIN                      41
+      #endif
+
+    #endif
+  #endif // IS_NEWPANEL
+
+#endif // HAS_WIRED_LCD