aboutsummaryrefslogtreecommitdiff
path: root/Marlin/src/pins/linux
diff options
context:
space:
mode:
Diffstat (limited to 'Marlin/src/pins/linux')
-rw-r--r--Marlin/src/pins/linux/pins_RAMPS_LINUX.h635
1 files changed, 635 insertions, 0 deletions
diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
new file mode 100644
index 0000000..ab1446f
--- /dev/null
+++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
@@ -0,0 +1,635 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments
+ *
+ * Applies to the following boards:
+ *
+ * RAMPS_14_EFB (Hotend, Fan, Bed)
+ * RAMPS_14_EEB (Hotend0, Hotend1, Bed)
+ * RAMPS_14_EFF (Hotend, Fan0, Fan1)
+ * RAMPS_14_EEF (Hotend0, Hotend1, Fan)
+ * RAMPS_14_SF (Spindle, Controller Fan)
+ *
+ * RAMPS_13_EFB (Hotend, Fan, Bed)
+ * RAMPS_13_EEB (Hotend0, Hotend1, Bed)
+ * RAMPS_13_EFF (Hotend, Fan0, Fan1)
+ * RAMPS_13_EEF (Hotend0, Hotend1, Fan)
+ * RAMPS_13_SF (Spindle, Controller Fan)
+ *
+ * Other pins_MYBOARD.h files may override these defaults
+ *
+ * Differences between
+ * RAMPS_13 | RAMPS_14
+ * 7 | 11
+ */
+
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "RAMPS 1.4"
+#endif
+
+#ifndef MARLIN_EEPROM_SIZE
+ #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
+#endif
+
+#define IS_RAMPS_EFB
+
+//
+// Servos
+//
+#ifdef IS_RAMPS_13
+ #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
+#else
+ #define SERVO0_PIN 11
+#endif
+#define SERVO1_PIN 6
+#define SERVO2_PIN 5
+#ifndef SERVO3_PIN
+ #define SERVO3_PIN 4
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN 3
+#ifndef X_MAX_PIN
+ #define X_MAX_PIN 2
+#endif
+#define Y_MIN_PIN 14
+#define Y_MAX_PIN 15
+#define Z_MIN_PIN 18
+#define Z_MAX_PIN 19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN 32
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN 54
+#define X_DIR_PIN 55
+#define X_ENABLE_PIN 38
+#ifndef X_CS_PIN
+ #define X_CS_PIN 53
+#endif
+
+#define Y_STEP_PIN 60
+#define Y_DIR_PIN 61
+#define Y_ENABLE_PIN 56
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN 49
+#endif
+
+#define Z_STEP_PIN 46
+#define Z_DIR_PIN 48
+#define Z_ENABLE_PIN 62
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN 40
+#endif
+
+#define E0_STEP_PIN 26
+#define E0_DIR_PIN 28
+#define E0_ENABLE_PIN 24
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN 42
+#endif
+
+#define E1_STEP_PIN 36
+#define E1_DIR_PIN 34
+#define E1_ENABLE_PIN 30
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN 44
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 0 // Analog Input
+#define TEMP_1_PIN 1 // Analog Input
+#define TEMP_BED_PIN 2 // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+ #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card
+#else
+ #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN)
+#endif
+
+//
+// Augmentation for auto-assigning RAMPS plugs
+//
+#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
+ #if HAS_MULTI_HOTEND
+ #if TEMP_SENSOR_BED
+ #define IS_RAMPS_EEB
+ #else
+ #define IS_RAMPS_EEF
+ #endif
+ #elif TEMP_SENSOR_BED
+ #define IS_RAMPS_EFB
+ #else
+ #define IS_RAMPS_EFF
+ #endif
+#endif
+
+//
+// Heaters / Fans
+//
+#ifndef MOSFET_D_PIN
+ #define MOSFET_D_PIN -1
+#endif
+#ifndef RAMPS_D8_PIN
+ #define RAMPS_D8_PIN 8
+#endif
+#ifndef RAMPS_D9_PIN
+ #define RAMPS_D9_PIN 9
+#endif
+#ifndef RAMPS_D10_PIN
+ #define RAMPS_D10_PIN 10
+#endif
+
+#define HEATER_0_PIN RAMPS_D10_PIN
+
+#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
+ #define FAN_PIN RAMPS_D9_PIN
+ #define HEATER_BED_PIN RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
+ #define HEATER_1_PIN RAMPS_D9_PIN
+ #define FAN_PIN RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
+ #define HEATER_1_PIN RAMPS_D9_PIN
+ #define HEATER_BED_PIN RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
+ #define FAN_PIN RAMPS_D9_PIN
+ #define FAN1_PIN RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
+ #define FAN_PIN RAMPS_D8_PIN
+#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+ #define FAN_PIN RAMPS_D9_PIN
+ #define HEATER_BED_PIN RAMPS_D8_PIN
+ #if HOTENDS == 1
+ #define FAN1_PIN MOSFET_D_PIN
+ #else
+ #define HEATER_1_PIN MOSFET_D_PIN
+ #endif
+#endif
+
+#ifndef FAN_PIN
+ #define FAN_PIN 4 // IO pin. Buffer needed
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS 53
+#define LED_PIN 13
+
+#ifndef FILWIDTH_PIN
+ #define FILWIDTH_PIN 5 // Analog Input on AUX2
+#endif
+
+// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
+#ifndef FIL_RUNOUT_PIN
+ #define FIL_RUNOUT_PIN 4
+#endif
+
+#ifndef PS_ON_PIN
+ #define PS_ON_PIN 12
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
+ #if NUM_SERVOS <= 1 // Prefer the servo connector
+ #define CASE_LIGHT_PIN 6 // Hardware PWM
+ #elif HAS_FREE_AUX2_PINS // try to use AUX 2
+ #define CASE_LIGHT_PIN 44 // Hardware PWM
+ #endif
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
+ #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector
+ #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
+ #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
+ #define SPINDLE_DIR_PIN 5
+ #elif HAS_FREE_AUX2_PINS // try to use AUX 2
+ #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
+ #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
+ #define SPINDLE_DIR_PIN 65
+ #endif
+#endif
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#ifndef E_MUX0_PIN
+ #define E_MUX0_PIN 40 // Z_CS_PIN
+#endif
+#ifndef E_MUX1_PIN
+ #define E_MUX1_PIN 42 // E0_CS_PIN
+#endif
+#ifndef E_MUX2_PIN
+ #define E_MUX2_PIN 44 // E1_CS_PIN
+#endif
+
+/**
+ * Default pins for TMC software SPI
+ */
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI 66
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO 44
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK 64
+ #endif
+#endif
+
+#if HAS_TMC_UART
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define X2_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Y2_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define Z2_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+ //#define E1_HARDWARE_SERIAL Serial1
+ //#define E2_HARDWARE_SERIAL Serial1
+ //#define E3_HARDWARE_SERIAL Serial1
+ //#define E4_HARDWARE_SERIAL Serial1
+
+ /**
+ * Software serial
+ */
+
+ #ifndef X_SERIAL_TX_PIN
+ #define X_SERIAL_TX_PIN 40
+ #endif
+ #ifndef X_SERIAL_RX_PIN
+ #define X_SERIAL_RX_PIN 63
+ #endif
+ #ifndef X2_SERIAL_TX_PIN
+ #define X2_SERIAL_TX_PIN -1
+ #endif
+ #ifndef X2_SERIAL_RX_PIN
+ #define X2_SERIAL_RX_PIN -1
+ #endif
+
+ #ifndef Y_SERIAL_TX_PIN
+ #define Y_SERIAL_TX_PIN 59
+ #endif
+ #ifndef Y_SERIAL_RX_PIN
+ #define Y_SERIAL_RX_PIN 64
+ #endif
+ #ifndef Y2_SERIAL_TX_PIN
+ #define Y2_SERIAL_TX_PIN -1
+ #endif
+ #ifndef Y2_SERIAL_RX_PIN
+ #define Y2_SERIAL_RX_PIN -1
+ #endif
+
+ #ifndef Z_SERIAL_TX_PIN
+ #define Z_SERIAL_TX_PIN 42
+ #endif
+ #ifndef Z_SERIAL_RX_PIN
+ #define Z_SERIAL_RX_PIN 65
+ #endif
+ #ifndef Z2_SERIAL_TX_PIN
+ #define Z2_SERIAL_TX_PIN -1
+ #endif
+ #ifndef Z2_SERIAL_RX_PIN
+ #define Z2_SERIAL_RX_PIN -1
+ #endif
+
+ #ifndef E0_SERIAL_TX_PIN
+ #define E0_SERIAL_TX_PIN 44
+ #endif
+ #ifndef E0_SERIAL_RX_PIN
+ #define E0_SERIAL_RX_PIN 66
+ #endif
+ #ifndef E1_SERIAL_TX_PIN
+ #define E1_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E1_SERIAL_RX_PIN
+ #define E1_SERIAL_RX_PIN -1
+ #endif
+ #ifndef E2_SERIAL_TX_PIN
+ #define E2_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E2_SERIAL_RX_PIN
+ #define E2_SERIAL_RX_PIN -1
+ #endif
+ #ifndef E3_SERIAL_TX_PIN
+ #define E3_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E3_SERIAL_RX_PIN
+ #define E3_SERIAL_RX_PIN -1
+ #endif
+ #ifndef E4_SERIAL_TX_PIN
+ #define E4_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E4_SERIAL_RX_PIN
+ #define E4_SERIAL_RX_PIN -1
+ #endif
+ #ifndef E5_SERIAL_TX_PIN
+ #define E5_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E5_SERIAL_RX_PIN
+ #define E5_SERIAL_RX_PIN -1
+ #endif
+ #ifndef E6_SERIAL_TX_PIN
+ #define E6_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E6_SERIAL_RX_PIN
+ #define E6_SERIAL_RX_PIN -1
+ #endif
+ #ifndef E7_SERIAL_TX_PIN
+ #define E7_SERIAL_TX_PIN -1
+ #endif
+ #ifndef E7_SERIAL_RX_PIN
+ #define E7_SERIAL_RX_PIN -1
+ #endif
+#endif
+
+//////////////////////////
+// LCDs and Controllers //
+//////////////////////////
+
+#if HAS_WIRED_LCD
+
+ //
+ // LCD Display output pins
+ //
+ #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+ #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
+ #define LCD_PINS_ENABLE 51 // SID (MOSI)
+ #define LCD_PINS_D4 52 // SCK (CLK) clock
+
+ #elif BOTH(IS_NEWPANEL, PANEL_ONE)
+
+ #define LCD_PINS_RS 40
+ #define LCD_PINS_ENABLE 42
+ #define LCD_PINS_D4 65
+ #define LCD_PINS_D5 66
+ #define LCD_PINS_D6 44
+ #define LCD_PINS_D7 64
+
+ #else
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ #define LCD_PINS_RS 27
+ #define LCD_PINS_ENABLE 29
+ #define LCD_PINS_D4 25
+
+ #if !IS_NEWPANEL
+ #define BEEPER_PIN 37
+ #endif
+
+ #elif ENABLED(ZONESTAR_LCD)
+
+ #define LCD_PINS_RS 64
+ #define LCD_PINS_ENABLE 44
+ #define LCD_PINS_D4 63
+ #define LCD_PINS_D5 40
+ #define LCD_PINS_D6 42
+ #define LCD_PINS_D7 65
+
+ #else
+
+ #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
+ #define LCD_PINS_DC 25 // Set as output on init
+ #define LCD_PINS_RS 27 // Pull low for 1s to init
+ // DOGM SPI LCD Support
+ #define DOGLCD_CS 16
+ #define DOGLCD_MOSI 17
+ #define DOGLCD_SCK 23
+ #define DOGLCD_A0 LCD_PINS_DC
+ #else
+ #define LCD_PINS_RS 16
+ #define LCD_PINS_ENABLE 17
+ #define LCD_PINS_D4 23
+ #define LCD_PINS_D5 25
+ #define LCD_PINS_D6 27
+ #endif
+
+ #define LCD_PINS_D7 29
+
+ #if !IS_NEWPANEL
+ #define BEEPER_PIN 33
+ #endif
+
+ #endif
+
+ #if !IS_NEWPANEL
+ // Buttons attached to a shift register
+ // Not wired yet
+ //#define SHIFT_CLK_PIN 38
+ //#define SHIFT_LD_PIN 42
+ //#define SHIFT_OUT_PIN 40
+ //#define SHIFT_EN_PIN 17
+ #endif
+
+ #endif
+
+ //
+ // LCD Display input pins
+ //
+ #if IS_NEWPANEL
+
+ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+ #define BEEPER_PIN 37
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+ #define BTN_EN1 17
+ #define BTN_EN2 23
+ #else
+ #define BTN_EN1 31
+ #define BTN_EN2 33
+ #endif
+
+ #define BTN_ENC 35
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
+
+ #if ENABLED(BQ_LCD_SMART_CONTROLLER)
+ #define LCD_BACKLIGHT_PIN 39
+ #endif
+
+ #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+ #define BTN_EN1 64
+ #define BTN_EN2 59
+ #define BTN_ENC 63
+ #define SD_DETECT_PIN 42
+
+ #elif ENABLED(LCD_I2C_PANELOLU2)
+
+ #define BTN_EN1 47
+ #define BTN_EN2 43
+ #define BTN_ENC 32
+ #define LCD_SDSS SDSS
+ #define KILL_PIN 41
+
+ #elif ENABLED(LCD_I2C_VIKI)
+
+ #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+ #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
+ #define BTN_ENC -1
+
+ #define LCD_SDSS SDSS
+ #define SD_DETECT_PIN 49
+
+ #elif ANY(VIKI2, miniVIKI)
+
+ #define DOGLCD_CS 45
+ #define DOGLCD_A0 44
+ #define LCD_SCREEN_ROT_180
+
+ #define BEEPER_PIN 33
+ #define STAT_LED_RED_PIN 32
+ #define STAT_LED_BLUE_PIN 35
+
+ #define BTN_EN1 22
+ #define BTN_EN2 7
+ #define BTN_ENC 39
+
+ #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
+ #define KILL_PIN 31
+
+ #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+ #define DOGLCD_CS 29
+ #define DOGLCD_A0 27
+
+ #define BEEPER_PIN 23
+ #define LCD_BACKLIGHT_PIN 33
+
+ #define BTN_EN1 35
+ #define BTN_EN2 37
+ #define BTN_ENC 31
+
+ #define LCD_SDSS SDSS
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
+
+ #elif ENABLED(MKS_MINI_12864)
+
+ #define DOGLCD_A0 27
+ #define DOGLCD_CS 25
+
+ // GLCD features
+ // Uncomment screen orientation
+ //#define LCD_SCREEN_ROT_90
+ //#define LCD_SCREEN_ROT_180
+ //#define LCD_SCREEN_ROT_270
+
+ #define BEEPER_PIN 37
+ // not connected to a pin
+ #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
+
+ #define BTN_EN1 31
+ #define BTN_EN2 33
+ #define BTN_ENC 35
+
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 64
+
+ #elif ENABLED(MINIPANEL)
+
+ #define BEEPER_PIN 42
+ // not connected to a pin
+ #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
+
+ #define DOGLCD_A0 44
+ #define DOGLCD_CS 66
+
+ // GLCD features
+ // Uncomment screen orientation
+ //#define LCD_SCREEN_ROT_90
+ //#define LCD_SCREEN_ROT_180
+ //#define LCD_SCREEN_ROT_270
+
+ #define BTN_EN1 40
+ #define BTN_EN2 63
+ #define BTN_ENC 59
+
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 64
+
+ #elif ENABLED(ZONESTAR_LCD)
+
+ #define ADC_KEYPAD_PIN 12
+
+ #elif ENABLED(AZSMZ_12864)
+
+ // Pins only defined for RAMPS_SMART currently
+
+ #else
+
+ // Beeper on AUX-4
+ #define BEEPER_PIN 33
+
+ // Buttons are directly attached to AUX-2
+ #if IS_RRW_KEYPAD
+ #define SHIFT_OUT_PIN 40
+ #define SHIFT_CLK_PIN 44
+ #define SHIFT_LD_PIN 42
+ #define BTN_EN1 64
+ #define BTN_EN2 59
+ #define BTN_ENC 63
+ #elif ENABLED(PANEL_ONE)
+ #define BTN_EN1 59 // AUX2 PIN 3
+ #define BTN_EN2 63 // AUX2 PIN 4
+ #define BTN_ENC 49 // AUX3 PIN 7
+ #else
+ #define BTN_EN1 37
+ #define BTN_EN2 35
+ #define BTN_ENC 31
+ #endif
+
+ #if ENABLED(G3D_PANEL)
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
+ #endif
+
+ #endif
+ #endif // IS_NEWPANEL
+
+#endif // HAS_WIRED_LCD
Copyright © 2024 Valentin A. Popov. All Rights Reverse Engineered.