Initial commit

1 files changed, 177 insertions, 0 deletions

diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
new file mode 100644
index 0000000..d66ffbe
--- /dev/null
+++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
@@ -0,0 +1,177 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Cohesion3D Mini pin assignments
+ */
+
+#if NOT_TARGET(MCU_LPC1769)
+  #error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
+#endif
+
+#define BOARD_INFO_NAME "Cohesion3D Mini"
+
+//
+// Servos
+//
+#define SERVO0_PIN                         P1_23
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                          P1_24  // 10k pullup to 3.3V
+#define X_MAX_PIN                          P1_25  // 10k pullup to 3.3V
+#define Y_MIN_PIN                          P1_26  // 10k pullup to 3.3V
+#define Y_MAX_PIN                          P1_27  // 10k pullup to 3.3V
+#define Z_MIN_PIN                          P1_28  // 10k pullup to 3.3V
+#define Z_MAX_PIN                          P1_29  // 10k pullup to 3.3V
+
+//
+// Steppers
+//
+#define X_STEP_PIN                         P2_00
+#define X_DIR_PIN                          P0_05
+#define X_ENABLE_PIN                       P0_04
+#define X_CS_PIN                           P1_10  // Ethernet Expansion - Pin 9
+
+#define Y_STEP_PIN                         P2_01
+#define Y_DIR_PIN                          P0_11
+#define Y_ENABLE_PIN                       P0_10
+#define Y_CS_PIN                           P1_09  // Ethernet Expansion - Pin 10
+
+#define Z_STEP_PIN                         P2_02
+#define Z_DIR_PIN                          P0_20
+#define Z_ENABLE_PIN                       P0_19
+#define Z_CS_PIN                           P1_00  // Ethernet Expansion - Pin 11
+
+#define E0_STEP_PIN                        P2_03
+#define E0_DIR_PIN                         P0_22
+#define E0_ENABLE_PIN                      P0_21
+#define E0_CS_PIN                          P1_04  // Ethernet Expansion - Pin 12
+
+//
+// Default pins for TMC software SPI
+//
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                    P1_16  // Ethernet Expansion - Pin 5
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                    P1_17  // Ethernet Expansion - Pin 6
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                     P1_08  // Ethernet Expansion - Pin 7
+  #endif
+#endif
+
+//
+// Analog Inputs
+//  3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN                      P0_23_A0  // P0_23
+#define TEMP_BED_PIN                    P0_24_A1  // P0_24
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN                     P2_05
+#define HEATER_0_PIN                       P2_07  // FET 1
+#ifndef FAN_PIN
+  #define FAN_PIN                          P2_06  // FET 3
+#endif
+
+//
+// Auto fans
+//
+#define AUTO_FAN_PIN                       P2_04  // FET 4
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+  #define E1_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+  #define E2_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN                            P4_28  // Play LED
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER
+  #undef HEATER_0_PIN
+  #define SPINDLE_LASER_ENA_PIN            P2_07  // FET 1
+  #undef HEATER_BED_PIN
+  #define SPINDLE_LASER_PWM_PIN            P2_05  // Bed FET
+  #undef FAN_PIN
+  #define SPINDLE_DIR_PIN                  P2_06  // FET 3
+#endif
+
+//
+// LCD / Controller
+//
+// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be
+// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER.
+//
+// A remote SD card is currently not supported because the pins routed to the EXP2
+// connector are shared with the onboard SD card, and Marlin does not support reading
+// G-code files from the onboard SD card.
+//
+#if HAS_WIRED_LCD
+
+  #define BEEPER_PIN                       P0_27  // EXP2-7 - open drain
+
+  #define BTN_EN1                          P3_26  // EXP2-5
+  #define BTN_EN2                          P3_25  // EXP2-3
+  #define BTN_ENC                          P1_30  // EXP1-2
+
+  #define LCD_PINS_RS                      P0_16  // EXP1-4
+  #define LCD_SDSS                         P0_28  // EXP2-4
+  #define LCD_PINS_ENABLE                  P0_18  // EXP1-3
+  #define LCD_PINS_D4                      P0_15  // EXP1-5
+
+  #define KILL_PIN                         P2_11  // EXP2-10
+
+  #if ENABLED(SDSUPPORT)
+    #error "SDSUPPORT is not currently supported by the Cohesion3D boards"
+  #endif
+
+#endif // HAS_WIRED_LCD
+
+//
+// Ethernet pins
+//
+#define ENET_MDIO                          P1_17
+#define ENET_RX_ER                         P1_14
+#define ENET_RXD1                          P1_10
+#define ENET_MOC                           P1_16
+#define REF_CLK                            P1_15
+#define ENET_RXD0                          P1_09
+#define ENET_CRS                           P1_08
+#define ENET_TX_EN                         P1_04
+#define ENET_TXD0                          P1_00
+#define ENET_TXD1                          P1_01