diff options
Diffstat (limited to 'Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h')
| -rw-r--r-- | Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h new file mode 100644 index 0000000..d66ffbe --- /dev/null +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -0,0 +1,177 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Cohesion3D Mini pin assignments + */ + +#if NOT_TARGET(MCU_LPC1769) + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "Cohesion3D Mini" + +// +// Servos +// +#define SERVO0_PIN P1_23 + +// +// Limit Switches +// +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 + +// +// Default pins for TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 + #endif +#endif + +// +// Analog Inputs +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN P0_23_A0 // P0_23 +#define TEMP_BED_PIN P0_24_A1 // P0_24 + +// +// Heaters / Fans +// +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 // FET 1 +#ifndef FAN_PIN + #define FAN_PIN P2_06 // FET 3 +#endif + +// +// Auto fans +// +#define AUTO_FAN_PIN P2_04 // FET 4 +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN AUTO_FAN_PIN +#endif + +// +// Misc. Functions +// +#define LED_PIN P4_28 // Play LED + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER + #undef HEATER_0_PIN + #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 + #undef HEATER_BED_PIN + #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET + #undef FAN_PIN + #define SPINDLE_DIR_PIN P2_06 // FET 3 +#endif + +// +// LCD / Controller +// +// LCD_PINS_D5, D6, and D7 are not present in the EXP1 connector, and will need to be +// defined to use the REPRAP_DISCOUNT_SMART_CONTROLLER. +// +// A remote SD card is currently not supported because the pins routed to the EXP2 +// connector are shared with the onboard SD card, and Marlin does not support reading +// G-code files from the onboard SD card. +// +#if HAS_WIRED_LCD + + #define BEEPER_PIN P0_27 // EXP2-7 - open drain + + #define BTN_EN1 P3_26 // EXP2-5 + #define BTN_EN2 P3_25 // EXP2-3 + #define BTN_ENC P1_30 // EXP1-2 + + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_SDSS P0_28 // EXP2-4 + #define LCD_PINS_ENABLE P0_18 // EXP1-3 + #define LCD_PINS_D4 P0_15 // EXP1-5 + + #define KILL_PIN P2_11 // EXP2-10 + + #if ENABLED(SDSUPPORT) + #error "SDSUPPORT is not currently supported by the Cohesion3D boards" + #endif + +#endif // HAS_WIRED_LCD + +// +// Ethernet pins +// +#define ENET_MDIO P1_17 +#define ENET_RX_ER P1_14 +#define ENET_RXD1 P1_10 +#define ENET_MOC P1_16 +#define REF_CLK P1_15 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 |