diff options
author | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
---|---|---|
committer | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
commit | e8701195e66f2d27ffe17fb514eae8173795aaf7 (patch) | |
tree | 9f519c4abf6556b9ae7190a6210d87ead1dfadde /Marlin/src/pins/mega/pins_CHEAPTRONIC.h | |
download | kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.tar.xz kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.zip |
Initial commit
Diffstat (limited to 'Marlin/src/pins/mega/pins_CHEAPTRONIC.h')
-rw-r--r-- | Marlin/src/pins/mega/pins_CHEAPTRONIC.h | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h new file mode 100644 index 0000000..98427d9 --- /dev/null +++ b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Cheaptronic v1.0 pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Cheaptronic v1.0" +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 2 +#define Z_STOP_PIN 5 + +// +// Steppers +// +#define X_STEP_PIN 14 +#define X_DIR_PIN 15 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 35 +#define Y_DIR_PIN 36 +#define Y_ENABLE_PIN 31 + +#define Z_STEP_PIN 40 +#define Z_DIR_PIN 41 +#define Z_ENABLE_PIN 37 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 25 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 + +// +// Temperature sensors +// +#define TEMP_0_PIN 15 // Analog Input +#define TEMP_1_PIN 14 // Analog Input +#define TEMP_BED_PIN 13 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 19 // EXTRUDER 1 +#define HEATER_1_PIN 23 // EXTRUDER 2 +#define HEATER_BED_PIN 22 + +// +// LCD / Controller +// +// Cheaptronic v1.0 doesn't support LCD |