1 files changed, 80 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h
new file mode 100644
index 0000000..98427d9
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h
@@ -0,0 +1,80 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Cheaptronic v1.0 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Cheaptronic v1.0"
+//
+// Limit Switches
+//
+#define X_STOP_PIN                             3
+#define Y_STOP_PIN                             2
+#define Z_STOP_PIN                             5
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            14
+#define X_DIR_PIN                             15
+#define X_ENABLE_PIN                          24
+
+#define Y_STEP_PIN                            35
+#define Y_DIR_PIN                             36
+#define Y_ENABLE_PIN                          31
+
+#define Z_STEP_PIN                            40
+#define Z_DIR_PIN                             41
+#define Z_ENABLE_PIN                          37
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         25
+
+#define E1_STEP_PIN                           33
+#define E1_DIR_PIN                            34
+#define E1_ENABLE_PIN                         30
+
+//
+// Temperature sensors
+//
+#define TEMP_0_PIN                            15  // Analog Input
+#define TEMP_1_PIN                            14  // Analog Input
+#define TEMP_BED_PIN                          13  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          19  // EXTRUDER 1
+#define HEATER_1_PIN                          23  // EXTRUDER 2
+#define HEATER_BED_PIN                        22
+
+//
+// LCD / Controller
+//
+// Cheaptronic v1.0 doesn't support LCD