Initial commit

1 files changed, 167 insertions, 0 deletions

diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h
new file mode 100644
index 0000000..540f5c2
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h
@@ -0,0 +1,167 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * CartesioV12 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "CN Controls V12"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            19
+#define Y_STOP_PIN                            22
+#define Z_STOP_PIN                            23
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            25
+#define X_DIR_PIN                             27
+#define X_ENABLE_PIN                          26
+
+#define Y_STEP_PIN                            28
+#define Y_DIR_PIN                             30
+#define Y_ENABLE_PIN                          29
+
+#define Z_STEP_PIN                            31
+#define Z_DIR_PIN                             33
+#define Z_ENABLE_PIN                          32
+
+#define E0_STEP_PIN                           57
+#define E0_DIR_PIN                            55
+#define E0_ENABLE_PIN                         58
+
+#define E1_STEP_PIN                           61
+#define E1_DIR_PIN                            62
+#define E1_ENABLE_PIN                         60
+
+#define E2_STEP_PIN                           46
+#define E2_DIR_PIN                            66
+#define E2_ENABLE_PIN                         44
+
+#define E3_STEP_PIN                           45
+#define E3_DIR_PIN                            69
+#define E3_ENABLE_PIN                         47
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input
+#define TEMP_1_PIN                             9  // Analog Input.  9 for tool2 -> 13 for chambertemp
+#define TEMP_2_PIN                            13  // Analog Input. 10 for tool3 -> 13 for chambertemp
+#define TEMP_3_PIN                            11  // Analog Input. 11 for tool4 -> 13 for chambertemp
+#define TEMP_BED_PIN                          14  // Analog Input
+
+#ifndef TEMP_CHAMBER_PIN
+  //#define TEMP_CHAMBER_PIN                  13  // Analog Input
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          11
+#define HEATER_1_PIN                           9
+#define HEATER_2_PIN                           6
+#define HEATER_3_PIN                           3
+#define HEATER_BED_PIN                        24
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              5  // 5 is PWMtool3 -> 7 is common PWM pin for all tools
+#endif
+
+//
+// Auto fans
+//
+#define AUTO_FAN_PIN                           7
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E1_AUTO_FAN_PIN
+  #define E1_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E2_AUTO_FAN_PIN
+  #define E2_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+#ifndef E3_AUTO_FAN_PIN
+  #define E3_AUTO_FAN_PIN           AUTO_FAN_PIN
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define SD_DETECT_PIN                         15
+
+// Tools
+
+//#define TOOL_0_PIN                          56
+//#define TOOL_0_PWM_PIN                      10  // red warning led at dual extruder
+//#define TOOL_1_PIN                          59
+//#define TOOL_1_PWM_PIN                       8  // lights at dual extruder
+//#define TOOL_2_PIN                           4
+//#define TOOL_2_PWM_PIN                       5
+//#define TOOL_3_PIN                          14
+//#define TOOL_3_PWM_PIN                       2
+
+// Common I/O
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                      18
+#endif
+//#define PWM_1_PIN                           12
+//#define PWM_2_PIN                           13
+//#define SPARE_IO                            17
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN                            16
+
+// Pins for DOGM SPI LCD Support
+#define DOGLCD_A0                             39
+#define DOGLCD_CS                             35
+#define DOGLCD_MOSI                           48
+#define DOGLCD_SCK                            49
+#define LCD_SCREEN_ROT_180
+
+// The encoder and click button
+#define BTN_EN1                               36
+#define BTN_EN2                               34
+#define BTN_ENC                               38
+
+// Hardware buttons for manual movement of XYZ
+#define SHIFT_OUT_PIN                         42
+#define SHIFT_LD_PIN                          41
+#define SHIFT_CLK_PIN                         40
+
+//#define UI1                                 43
+//#define UI2                                 37
+
+#define STAT_LED_BLUE_PIN                     -1
+#define STAT_LED_RED_PIN                      10  // TOOL_0_PWM_PIN