diff options
Diffstat (limited to 'Marlin/src/pins/mega/pins_CNCONTROLS_12.h')
| -rw-r--r-- | Marlin/src/pins/mega/pins_CNCONTROLS_12.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h new file mode 100644 index 0000000..540f5c2 --- /dev/null +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h @@ -0,0 +1,167 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * CartesioV12 pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "CN Controls V12" + +// +// Limit Switches +// +#define X_STOP_PIN 19 +#define Y_STOP_PIN 22 +#define Z_STOP_PIN 23 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 27 +#define X_ENABLE_PIN 26 + +#define Y_STEP_PIN 28 +#define Y_DIR_PIN 30 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 31 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 32 + +#define E0_STEP_PIN 57 +#define E0_DIR_PIN 55 +#define E0_ENABLE_PIN 58 + +#define E1_STEP_PIN 61 +#define E1_DIR_PIN 62 +#define E1_ENABLE_PIN 60 + +#define E2_STEP_PIN 46 +#define E2_DIR_PIN 66 +#define E2_ENABLE_PIN 44 + +#define E3_STEP_PIN 45 +#define E3_DIR_PIN 69 +#define E3_ENABLE_PIN 47 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp +#define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp +#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp +#define TEMP_BED_PIN 14 // Analog Input + +#ifndef TEMP_CHAMBER_PIN + //#define TEMP_CHAMBER_PIN 13 // Analog Input +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 11 +#define HEATER_1_PIN 9 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 3 +#define HEATER_BED_PIN 24 + +#ifndef FAN_PIN + #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools +#endif + +// +// Auto fans +// +#define AUTO_FAN_PIN 7 +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN AUTO_FAN_PIN +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 15 + +// Tools + +//#define TOOL_0_PIN 56 +//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder +//#define TOOL_1_PIN 59 +//#define TOOL_1_PWM_PIN 8 // lights at dual extruder +//#define TOOL_2_PIN 4 +//#define TOOL_2_PWM_PIN 5 +//#define TOOL_3_PIN 14 +//#define TOOL_3_PWM_PIN 2 + +// Common I/O + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 18 +#endif +//#define PWM_1_PIN 12 +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 + +// +// LCD / Controller +// +#define BEEPER_PIN 16 + +// Pins for DOGM SPI LCD Support +#define DOGLCD_A0 39 +#define DOGLCD_CS 35 +#define DOGLCD_MOSI 48 +#define DOGLCD_SCK 49 +#define LCD_SCREEN_ROT_180 + +// The encoder and click button +#define BTN_EN1 36 +#define BTN_EN2 34 +#define BTN_ENC 38 + +// Hardware buttons for manual movement of XYZ +#define SHIFT_OUT_PIN 42 +#define SHIFT_LD_PIN 41 +#define SHIFT_CLK_PIN 40 + +//#define UI1 43 +//#define UI2 37 + +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN |