Initial commit

1 files changed, 115 insertions, 0 deletions

diff --git a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h
new file mode 100644
index 0000000..9c316aa
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h
@@ -0,0 +1,115 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Leapfrog Xeed Driver board pin assignments
+ *
+ * This board is used by other Leapfrog printers in addition to the Xeed,
+ * such as the Creatr HS and Bolt. The pin assignments vary wildly between
+ * printer models. As such this file is currently specific to the Xeed.
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Leapfrog Xeed 2015"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            47  // 'X Min'
+#define Y_STOP_PIN                            48  // 'Y Min'
+#define Z_STOP_PIN                            49  // 'Z Min'
+
+//
+// Steppers
+// The Xeed utilizes three Z-axis motors, which use the X, Y, and Z stepper connectors
+// on the board. The X and Y steppers use external drivers, attached to signal-level
+// Y-axis and X-axis connectors on the board, which map to distinct CPU pins from
+// the on-board X/Y stepper drivers.
+//
+
+// X-axis signal-level connector
+#define X_STEP_PIN                            65
+#define X_DIR_PIN                             64
+#define X_ENABLE_PIN                          66  // Not actually used on Xeed, could be repurposed
+
+// Y-axis signal-level connector
+#define Y_STEP_PIN                            23
+#define Y_DIR_PIN                             22
+#define Y_ENABLE_PIN                          24  // Not actually used on Xeed, could be repurposed
+
+// ZMOT connector (Front Right Z Motor)
+#define Z_STEP_PIN                            31
+#define Z_DIR_PIN                             32
+#define Z_ENABLE_PIN                          30
+
+// XMOT connector (Rear Z Motor)
+#define Z2_STEP_PIN                           28
+#define Z2_DIR_PIN                            63
+#define Z2_ENABLE_PIN                         29
+
+// YMOT connector (Front Left Z Motor)
+#define Z3_STEP_PIN                           14
+#define Z3_DIR_PIN                            15
+#define Z3_ENABLE_PIN                         39
+
+// EMOT2 connector
+#define E0_STEP_PIN                           37
+#define E0_DIR_PIN                            40
+#define E0_ENABLE_PIN                         36
+
+// EMOT connector
+#define E1_STEP_PIN                           34
+#define E1_DIR_PIN                            35
+#define E1_ENABLE_PIN                         33
+
+//
+// Filament runout
+//
+#define FIL_RUNOUT_PIN                        42  // ROT2 Connector
+#define FIL_RUNOUT2_PIN                       44  // ROT1 Connector
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            15  // T3 Connector
+#define TEMP_1_PIN                            13  // T1 Connector
+#define TEMP_BED_PIN                          14  // BED Connector (Between T1 and T3)
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           8  // Misc Connector, pins 3 and 4 (Out2)
+#define HEATER_1_PIN                           9  // Misc Connector, pins 5 and 6 (Out3)
+#define HEATER_BED_PIN                         6  // Misc Connector, pins 9(-) and 10(+) (OutA)
+
+#define FAN_PIN                               10  // Misc Connector, pins 7(-) and 8 (+) (Out4)
+
+#define LED_PIN                               13
+
+#define SOL1_PIN                               7  // Misc Connector, pins 1(-) and 2(+) (Out1)
+
+// Door Closed Sensor
+//#define DOOR_PIN                            45  // HM1 Connector