Initial commit

1 files changed, 155 insertions, 0 deletions

diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h
new file mode 100644
index 0000000..ef4605e
--- /dev/null
+++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h
@@ -0,0 +1,155 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * MegaTronics v2.0 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Megatronics v2.0"
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             37
+#define X_MAX_PIN                             40
+#define Y_MIN_PIN                             41
+#define Y_MAX_PIN                             38
+#define Z_MIN_PIN                             18
+#define Z_MAX_PIN                             19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     19
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            26
+#define X_DIR_PIN                             27
+#define X_ENABLE_PIN                          25
+
+#define Y_STEP_PIN                             4  // A6
+#define Y_DIR_PIN                             54  // A0
+#define Y_ENABLE_PIN                           5
+
+#define Z_STEP_PIN                            56  // A2
+#define Z_DIR_PIN                             60  // A6
+#define Z_ENABLE_PIN                          55  // A1
+
+#define E0_STEP_PIN                           35
+#define E0_DIR_PIN                            36
+#define E0_ENABLE_PIN                         34
+
+#define E1_STEP_PIN                           29
+#define E1_DIR_PIN                            39
+#define E1_ENABLE_PIN                         28
+
+#define E2_STEP_PIN                           23  // ? schematic says 24
+#define E2_DIR_PIN                            24  // ? schematic says 23
+#define E2_ENABLE_PIN                         22
+
+//
+// Temperature Sensors
+//
+#if TEMP_SENSOR_0 == -1
+  #define TEMP_0_PIN                           4  // Analog Input
+#else
+  #define TEMP_0_PIN                          13  // Analog Input
+#endif
+
+#if TEMP_SENSOR_1 == -1
+  #define TEMP_1_PIN                           8  // Analog Input
+#else
+  #define TEMP_1_PIN                          15  // Analog Input
+#endif
+
+#if TEMP_SENSOR_BED == -1
+  #define TEMP_BED_PIN                         8  // Analog Input
+#else
+  #define TEMP_BED_PIN                        14  // Analog Input
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           9
+#define HEATER_1_PIN                           8
+#define HEATER_BED_PIN                        10
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              7
+#endif
+#define FAN1_PIN                               6
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+#define PS_ON_PIN                             12
+
+#ifndef CASE_LIGHT_PIN
+  #define CASE_LIGHT_PIN                       2
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_PWM_PIN                  3  // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN                 16  // Pullup!
+#define SPINDLE_DIR_PIN                       11
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN                            64
+
+#if HAS_WIRED_LCD
+
+  #define LCD_PINS_RS                         14
+  #define LCD_PINS_ENABLE                     15
+  #define LCD_PINS_D4                         30
+  #define LCD_PINS_D5                         31
+  #define LCD_PINS_D6                         32
+  #define LCD_PINS_D7                         33
+
+  #if IS_NEWPANEL
+    // Buttons are directly attached using keypad
+    #define BTN_EN1                           61
+    #define BTN_EN2                           59
+    #define BTN_ENC                           43
+  #else
+    // Buttons attached to shift register of reprapworld keypad v1.1
+    #define SHIFT_CLK_PIN                     63
+    #define SHIFT_LD_PIN                      42
+    #define SHIFT_OUT_PIN                     17
+    #define SHIFT_EN_PIN                      17
+  #endif
+
+#endif // HAS_WIRED_LCD