diff options
Diffstat (limited to 'Marlin/src/pins/mega/pins_MEGATRONICS_2.h')
| -rw-r--r-- | Marlin/src/pins/mega/pins_MEGATRONICS_2.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h new file mode 100644 index 0000000..ef4605e --- /dev/null +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -0,0 +1,155 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MegaTronics v2.0 pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Megatronics v2.0" +// +// Limit Switches +// +#define X_MIN_PIN 37 +#define X_MAX_PIN 40 +#define Y_MIN_PIN 41 +#define Y_MAX_PIN 38 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 27 +#define X_ENABLE_PIN 25 + +#define Y_STEP_PIN 4 // A6 +#define Y_DIR_PIN 54 // A0 +#define Y_ENABLE_PIN 5 + +#define Z_STEP_PIN 56 // A2 +#define Z_DIR_PIN 60 // A6 +#define Z_ENABLE_PIN 55 // A1 + +#define E0_STEP_PIN 35 +#define E0_DIR_PIN 36 +#define E0_ENABLE_PIN 34 + +#define E1_STEP_PIN 29 +#define E1_DIR_PIN 39 +#define E1_ENABLE_PIN 28 + +#define E2_STEP_PIN 23 // ? schematic says 24 +#define E2_DIR_PIN 24 // ? schematic says 23 +#define E2_ENABLE_PIN 22 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 4 // Analog Input +#else + #define TEMP_0_PIN 13 // Analog Input +#endif + +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 8 // Analog Input +#else + #define TEMP_1_PIN 15 // Analog Input +#endif + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 8 // Analog Input +#else + #define TEMP_BED_PIN 14 // Analog Input +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif +#define FAN1_PIN 6 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 2 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 16 // Pullup! +#define SPINDLE_DIR_PIN 11 + +// +// LCD / Controller +// +#define BEEPER_PIN 64 + +#if HAS_WIRED_LCD + + #define LCD_PINS_RS 14 + #define LCD_PINS_ENABLE 15 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 31 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 33 + + #if IS_NEWPANEL + // Buttons are directly attached using keypad + #define BTN_EN1 61 + #define BTN_EN2 59 + #define BTN_ENC 43 + #else + // Buttons attached to shift register of reprapworld keypad v1.1 + #define SHIFT_CLK_PIN 63 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 17 + #define SHIFT_EN_PIN 17 + #endif + +#endif // HAS_WIRED_LCD |