Initial commit

1 files changed, 96 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h
new file mode 100644
index 0000000..6ddd2a5
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h
@@ -0,0 +1,96 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#elif HOTENDS > 2 || E_STEPPERS > 2
+  #error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
+  #define CASE_LIGHT_PIN                       6  // Define before RAMPS pins include
+#endif
+#define BOARD_INFO_NAME "Azteeg X3"
+
+//
+// Servos
+//
+#define SERVO0_PIN                            44  // SERVO1 port
+#define SERVO1_PIN                            55  // SERVO2 port
+
+#include "pins_RAMPS_13.h"
+
+//
+// LCD / Controller
+//
+#undef STAT_LED_RED_PIN
+#undef STAT_LED_BLUE_PIN
+
+#if ANY(VIKI2, miniVIKI)
+
+  #undef DOGLCD_A0
+  #undef DOGLCD_CS
+  #undef BTN_ENC
+  #define DOGLCD_A0                           31
+  #define DOGLCD_CS                           32
+  #define BTN_ENC                             12
+
+  #define STAT_LED_RED_PIN                    64
+  #define STAT_LED_BLUE_PIN                   63
+
+#else
+
+  #define STAT_LED_RED_PIN                     6
+  #define STAT_LED_BLUE_PIN                   11
+
+#endif
+
+//
+// Misc
+//
+#if ENABLED(CASE_LIGHT_ENABLE) && PINS_EXIST(CASE_LIGHT, STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN
+  #undef STAT_LED_RED_PIN
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#undef SPINDLE_LASER_PWM_PIN                      // Definitions in pins_RAMPS.h are no good with the AzteegX3 board
+#undef SPINDLE_LASER_ENA_PIN
+#undef SPINDLE_DIR_PIN
+
+#if HAS_CUTTER
+  #undef SDA                                      // use EXP3 header
+  #undef SCL
+  #if SERVO0_PIN == 7
+    #undef SERVO0_PIN
+    #define SERVO0_PIN                        11
+  #endif
+  #define SPINDLE_LASER_PWM_PIN                7  // Hardware PWM
+  #define SPINDLE_LASER_ENA_PIN               20  // Pullup!
+  #define SPINDLE_DIR_PIN                     21
+#endif